Professional Documents
Culture Documents
Anson Washington - Extreme Xos Commands Cheat Sheet
Anson Washington - Extreme Xos Commands Cheat Sheet
configure vlan Default ipaddress disable telnet enable ipforwarding vlan vlan2
10.222.222.1 255.255.255.0 enable ssh2 enable ipforwarding vlan Default
Update Firmware: Configure SNMP information: Check Cable for Wiring issues(Gen 2
Switches):
download image 10.222.222.2 summitX-1‐ configure snmp sysContact "System
5.5.2.9-patch1-5.xos VR-Default secondary Contact" run diagnostics cable port
use image secondary configure snmp sysLocation "System
reboot Location" Show Open(Ready) Ports:
* (repeat process for primary)* configure snmp sysName "System Name"
show ports no-refresh | inc "R"
disable snmp access
Install SSH:
Show Port History:
Configure display string:
download image 10.222.222.2 summitX-1‐
show port info detail | include Port:|Link\s‐
5.5.2.9-patch1-5-ssh.xmod VR-Default conf port 1:48 display-string UplinkToASA
State:|Link\sUps:|Link\sDowns:
secondary
run update Remove VLAN:
Display Logs:
unconfigure vlan vlan10 ipaddress
show log
Stop using default VLAN (vlan 1):
delete vlan vlan10
configure vlan "Default" delete ports all
Configure admin user:
configure vlan vlan10 add ports 1:1-48,2:2- Configure SNTP:
configure account admin
48
configure sntp-client primary 173.255.2‐
30.140 vr VR-Default
Configure timezone:
Show Active Ports:
configure sntp-client secondary 129.6.15.30
configure timezone name EST -300 autodst
show ports no-refresh | inc "A" vr VR-Default
enable sntp-client
Create and configure VLAN:
DHCP:
Link Aggregation Group: create vlan vlan10 description "User
configure vlan vlan5 dhcp-address-range
Access" tag 10
172.21.5.51 - 172.21.5.51 configure sharing 1:47 add ports 1:48, 2:48
configure vlan vlan10 ipaddress 10.10.1‐
configure vlan vlan5 dhcp-options default-g‐
0.10 255.255.255.0
ateway 172.21.5.1 Show commands:
configure vlan vlan5 dhcp-options dns-
show config
Connect stacking cables:
server 8.8.8.8
show iproute
configure vlan vlan5 dhcp-options dns- sw01-port2 -> sw02-port1
show iparp
server secondary 8.8.4.4 sw02-port2 -> sw03-port1
show fdb
enable dhcp ports 1:1-46, 2:1-46, 3:1-46, sw03-port2 -> sw04-port1
show version [images]
4:1-16 vlan vlan5 sw04-port2 -> sw01-port1
show switch [detail]
(can have up to eight nodes per stack)
show stack [detail]
Configure Default Route:
show slot
Enable Stacking:
config iproute add default 10.10.10.1 show cdp neighbor
show edp port all configure stacking easy-setup