Professional Documents
Culture Documents
2019.04-Tesmec Stringing Catalog Section 5 en
2019.04-Tesmec Stringing Catalog Section 5 en
ESSENTIAL
Machines
INDEX
5
ESSENTIAL Machines
Bull wheel Grooves Engine Power
CODE Pull range (kN) Layout diameter (mm) number(kN) (kW)
3
ESSENTIAL Machines
The basic
solutions
The essential machines are one of the solutions The quality of these machines is tested by several
supplied by Tesmec for new line constructions. years of employment on different jobsites, in every
weather condition from Russia to Saudi Arabia.
This is the most basic and light solution, with few or
no electronic components at all. The machines are extra CE/EPA, except for the
pullers ARS500 and ARS700 available also in CE/
EPA version.
4
ESSENTIAL MACHINES: our value proposition 5
5
essential MACHINES
ARS522
Hydraulic
Puller
50 kN 5 km/h 16 mm
Extra CE/EPA
Light & Simple
Characteristics configuration
Bull-wheel diameter 400 mm Negative self-acting hydraulic brake Hydraulic
dynamometer with set-point and automatic
Bull-wheel material STEEL control of maximum pull
Max rope diameter 16 mm Control instruments for hydraulic system and
Diesel engine
Weight 2050 kg Rigid axle 30 km/h
On board reel winder with automatic level wind,
Number of grooves 7
suitable for standard reel mod. BOF010 and
Suitable for 1 rope BOF020 (AXR001 included)
Electronic pull and speed recorder kit
Layout Single (instrument not included)
Pull pre-setting system
Mechanical front stabiliser
Grounding connection point
ALL111
2150
1765
2530 DLR300
ARS519
Hydraulic
Puller
70 kN 4 km/h 16 mm
Extra CE/EPA
Light & Simple
completely electronically controlled
2150
4840 DLR300
ARS500
Hydraulic
Puller
90 kN 5 km/h 18 mm
AVAILABLE ALSO FOR CE/EPA
HIGH PERFORMANCE
completely electronically controlled
2260
3360 DLR300
ARS612
Hydraulic
Puller
2410
3900 DLR300
ARS700/701
Hydraulic
Puller
160/180 kN 5 km/h 24 mm
AVAILABLE ALSO FOR CE/EPA
HIGH PERFORMANCE
completely electronically controlled
2270
4285
DLR300
FRS404
Hydraulic
Tensioner
40 kN 5 km/h 34 mm
AVAILABLE ALSO FOR CE/EPA
Light & Simple
AVAILABLE PURE HYDRAULIC VERSION FRS403
1810
3700
FRS531
Hydraulic
Tensioner
75 kN 5 km/h 34 mm
Extra CE/EPA
completely electronically controlled
2030
3660
FRS615
Hydraulic
Tensioner
140 kN 5 km/h 40 mm
Extra CE/EPA
completely electronically controlled
Available Devices
PERFORMANCE* Engine
ALL001 Lighting system for the trailer
Max tension 140 kN Diesel 48 kW (64 hp)
ALL002 Air brake system for the trailer
Max speed 5 km/h Cooling system water
Hydraulic power for an external
Max pull back 140 kN Electrical system 24 V ALL005
compressor
Max speed at pull back 1.8 km/h ALL037 Preheating device for use up to -30°C
Hydraulic Transmission
* at 20°C and at sea level AXC005 Cable remote control (15 m range)
Hydraulic circuit that provides very sensitive
tensioning control and negligible deviations of Radio remote control kit (instrument
tension in case of speed change. ALL059
not included)
Characteristics AXH007 Radio remote control (150 m range)
configuration
Bull-wheel diameter 1500 mm Hydraulic rope clamp for reel change
Negative self-acting hydraulic brake ALL071
Bull-wheel material NYLON operations
Hydraulic dynamometer with set-point and
Max conductor diameter 40 mm automatic control of maximum pull 4 hydraulic conductor clamps for
ALL071
Digital meter counter drum change operations
Weight 6200 kg Control instruments for hydraulic system and
Diesel engine ALL080 Special nylon sectors kit
Number of grooves 16
Rigid axle 30 km/h same as ALL080 but in addition
Suitable for 1, 2, 3 or 4 Hydraulic power pack to control up to 4 reel ALL081
instead of as an alternative
conductors stands with hydraulic head, not independent
control Electronic arrangement for
Layout Single Hydraulic front stabiliser ALL089 connection of multiple machines and
Grounding connection point for stringing synchronization
2920
2500
3960
FRB600
Hydraulic
Tensioner
2x75 kN 5 km/h 38 mm
Extra CE/EPA
completely electronically controlled
2410
4940