Professional Documents
Culture Documents
Clamp Rack Plan PDF
Clamp Rack Plan PDF
Extra space
150 mm
600 mm
30 mm
150 mm
Step 3. Glueing the dividers on the platform. Use the actual clamp to measure
the distance between the dividers. Make sure the clamps have enough
space to glide into place. In my case this is about 52 mm. When this is
done, you cut off the last part!
52 mm
Step 4. Measure the actual length of the board. Then we can cut the back board
at the right dimensions. In my case about 360 mm
360 mm
Step 5. Making the holder to keep the clamps in place. After cutting it at the
right dimensions, we have to cut the slots out of the holder. The wide of
my board is 70 mm. The length is depending on how much clamps you
want to use. In my case 360 mm.
12 mm
50 mm
70 mm
360 mm
Step 6. Cutting the 2 lifters.
150 mm
10 mm
70 mm
2X
90 mm