Professional Documents
Culture Documents
3TNV70-XBV-M49501 - en - 719540-51450
3TNV70-XBV-M49501 - en - 719540-51450
3TNV70-XBV-M49501 - en - 719540-51450
0CS10-M49501EN
1. This Parts Catalog carries Yanmar excavator (crawler back-hoe) VIO17 for
U.S.A.,Australia,New New Zealand & Singapore.
(M/# 00501∼)
3. Your understanding is asking that this parts catalog is not a technical data manual
setting forth as servicing procedures, This parts catalog is using simplified
illustration.
Be sure to use Yanmar Genuine Parts in your maintenance servicing of Yanmar products.
Be careful not to use the simple parts available in the market, otherwise their use
in repairing causes such as an early breakage, for instance.
0CS10-M49501 VIO17(US,AS,NZ,SG)
VEHICLE PAINTED COLOR(TO M07000)
73
49
49
2J
2J
49
73
49
73
73
2J
73
2J
49 49
0CS10-M49501 VIO17(US,AS,NZ,SG)
VEHICLE PAINTED COLOR(FROM M07001 TO M0F000)
73
49
49
2R 2R
49
49
73
49
73
73 2R
73
2R
49
49 49
0CS10-M49501 VIO17(US,AS,NZ,SG)
VEHICLE PAINTED COLOR(FROM M0F001)
49
49
49
2R 2R
49
49
49
49
2R
49
2R
49 49
0CS10-M49501 VIO17(US,AS,NZ,SG)
PICTURESQUE INDEX(1)・・・MAIN PARTS
1.LABEL & ACCESSORY
Fig.1,2,95
10.CANOPY
Fig.41
8.AROUND SEAT
Fig.34,36 to 39,96,97
2.ENGINE RELATED
Fig.3 to 9,99
9.BONNET
Fig.40
5.CONTROL EQUIPMENT
Fig.19 to 28
13.IMPLEMENT
Fig.76 to 81 RIGHT REAR
6.FRAME
Fig.29,30,92
7.COVER
Fig.31 to 33,35
LEFT 4.TRAVELING
FRONT
Fig.16 to 18,85,93,94,98
0CS10-M49501 VIO17(US,AS,NZ,SG)
PICTURESQUE INDEX(2)・・・HYDRAULIC SECTION
HYD.OIL PIPING Fig.63∼72,91
CONTROL PIPING Fig.73,74,87
0CS10-M49501 VIO17(US,AS,NZ,SG)
Contents
0CS10-M49501
LABEL & ACCESSORY 85. (16A)SPROCKET & ROLLER(IRON CRAWLER SPEC.)(Y SPEC.)
95. (1A)LABEL(FROM M0F001) 94. (16C)SPROCKET & ROLLER(IRON CRAWLER SPEC.)(S SPEC.)
3. SILENCER
TRAVELING
16. SPROCKET & TRACK ROLLER(RUBBER CRAWLER SPEC.)(Y SPEC.)
Contents
0CS10-M49501
43. BOOM CYLINDER 91. (63A)TANK - PUMP - CONTROL VALVE(F SPEC.)(FROM M09714)
Contents
0CS10-M49501
69. RESERVOIR
72. P.T.O.
75. GREASING
IMPLEMENT
76. BOOM BRACKET
77. BOOM
78. ARM
80. BUCKET
81. BLADE
Remarks
(1)2-Way specification.
(2)4-Way specification.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 LABEL & ACCESSORY 0CS10-M49501 Fig.95
Remarks
(1)2-Way specification.
(2)4-Way specification.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 LABEL & ACCESSORY 0CS10-M49501 Fig.2
Remarks
(1)2-Way specification.
(2)4-Way specification.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 ENGINE RELATED 0CS10-M49501 Fig.3
Remarks
(1)AS DOUBLE ELEMENT specification are shown in Fig.99(4A).
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 ENGINE RELATED 0CS10-M49501 Fig.99
Remarks
(1)Order No.1, 9, 13 & 23.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 ENGINE RELATED 0CS10-M49501 Fig.9
++ CONTINUE ++ Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 ENGINE RELATED 0CS10-M49501 Fig.9
Remarks
(1)Interchangeable by simultaneous replacement with No.1-1, 32, 33 & Fig.37 No.23.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 ELECTRICAL PARTS 0CS10-M49501 Fig.13
Remarks
(1)Compatibility by assembly exchang with parts of Fig.93(16B) No.1.
The inner parts are not compatible.
A : There is no welding in the Y specifications, and there is welding in the S specifications.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 TRAVELING 0CS10-M49501 Fig.85
Remarks
* A : There is no welding in the Y specifications, and there is welding in the S specifications.
(1)Compatibility by assembly exchang with parts of Fig.94(16C) No.1.
The inner parts are not compatible.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 TRAVELING 0CS10-M49501 Fig.93
Remarks
* A : There is no welding in the Y specifications, and there is welding in the S specifications.
* Track roller (Y specification) are shown in Fig.16.
The inner parts are not compatible.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 TRAVELING 0CS10-M49501 Fig.94
Remarks
* A : There is no welding in the Y specifications, and there is welding in the S specifications.
* Track roller (Iron crawler specification)(Y specification) are shown in Fig.85(16A).
The inner parts are not compatible.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 TRAVELING 0CS10-M49501 Fig.17
++ CONTINUE ++ Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 TRAVELING 0CS10-M49501 Fig.17
Remarks
(1)Interchangeable by Fig.98(18A) No.1.
The inner parts are not compatible.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 TRAVELING 0CS10-M49501 Fig.98
Remarks
* Iron crawler (T specification) are shown in Fig.18.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 CONTROL EQUIPMENT 0CS10-M49501 Fig.19
Remarks
(1)A=No.3 M10 screw, No.3-1 no screw. Interchangeable by simultaneous replacement with No.1-1.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 CONTROL EQUIPMENT 0CS10-M49501 Fig.20
Remarks
(1)A=No.18 M10 screw, No.18-1 no screw. Interchangeable by simultaneous replacement with No.17-1.
(2)W=No.1 41mm, No.1-1 45mm.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 CONTROL EQUIPMENT 0CS10-M49501 Fig.21
Remarks
(1)Remodeling kit.
(2)D=No.1 340mm, No.1-1 330mm.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 FRAME 0CS10-M49501 Fig.92
Remarks
(1)Remodeling kit.
(2)D=No.1 340mm, No.1-1 330mm.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 FRAME 0CS10-M49501 Fig.30
Remarks
(1)Attach the No.15A label to this part.
(2)Attach the No.16A & 16B label to this part.
(3)Label is not illustrated.
(4)Interchangeable by simultaneous replacement with No.4A.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 AROUND SEAT 0CS10-M49501 Fig.34
Remarks
(1)Attach the No.24A, 24B & 24C label to this part.
(2)Label is not illustrated.
(3)Color = DARK OLIVE GRAY.
(4)Color = BLACK.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 AROUND SEAT 0CS10-M49501 Fig.36
Remarks
(1)Hour meter = analog type. Copes in No.24.
(2)Hour meter = L.C.D. type.
(3)Color = DARK OLIVE GRAY.
(4)Color = PANTONE 425C.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 AROUND SEAT 0CS10-M49501 Fig.38
Remarks
(1)Interchangeable by simultaneous replacement with No.9-1, 10-1, 14-1 & 15-1.
(2)Spare parts is shown in Fig.96(38A) No.32.
(3)Seat belt specification.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 AROUND SEAT 0CS10-M49501 Fig.96
Remarks
(1)H=No.1 260mm, No.1-1 263mm.
Attach the No.10A label to this part.
(2)Label is not illustrated.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 BONNET 0CS10-M49501 Fig.40
Remarks
(1)Attach the No.22A, 22B, 22C & 22D label to this part.
(2)Label is not illustrated.
(3)Color = DARK OLIVE GRAY.
(4)Color = BLACK.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 CANOPY 0CS10-M49501 Fig.41
Remarks
(1)Attach the No.13A, 13B, 13C, 13D, 13E, 13F, 13G, 13H, 13I & 13J label to this part.
(2)Label is not illustrated.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.42
++ CONTINUE ++ Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.42
++ CONTINUE ++ Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.90
Remarks
(1)Interchangeable by simultaneous replacement with No.5-1.
(2)L=No.32 : 2mm, No.32-1 : 5mm.
Interchangeable by simultaneous replacement with No.29-1.
(3)T=No.2 2mm, No.2-1 4.5mm.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.44
Remarks
(1)T=No.1 2mm, No.1-1 4.5mm.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.45
Remarks
(1)T=No.1 2mm, No.1-1 4.5mm.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.46
Remarks
(1)Order No.15 & 16.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.50
Remarks
(1)A : no label.
Compatible by assembly exchange with parts of Fig.89(51A) No.1.
The inner parts are not compatible.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.89
Remarks
(1)A:'NACHI'LABEL
Compatible by assembly exchange from parts of Fig.51 No.1.
The inner parts are not compatible.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.52
Remarks
* Control valve assy is shown in Fig.52.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.54
Remarks
* Control valve assy is shown in Fig.52.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.55
Remarks
* Control valve assy is shown in Fig.52.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.56
Remarks
* Control valve assy is shown in Fig.52.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.57
Remarks
* Control valve assy is shown in Fig.52.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.58
Remarks
* Control valve assy is shown in Fig.52.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL EQUIPMENT 0CS10-M49501 Fig.59
Remarks
(1)Attach the No.18A label to this part.
(2)Label is not illustrated.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.63
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.91
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.64
Remarks
* Fitting(swivel joint) is shown in Fig.65.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.65
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.66
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.67
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.68
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.69
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.71
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.73
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.74
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.87
Remarks
* Fitting(control valve) is shown in Fig.71.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 HYDRAULIC OIL PIPING 0CS10-M49501 Fig.75
Remarks
(1)Attach the No.20A label to this part.
(2)Label is not illustrated.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 IMPLEMENT 0CS10-M49501 Fig.78
Remarks
(1)Copes in No.26.
(2)Spare parts.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 IMPLEMENT 0CS10-M49501 Fig.81
Remarks
(1)Order No.3, 4 & 5.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 OPTIONAL & KIT 0CS10-M49501 Fig.82
Remarks
* This figure is not applied after M01212.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 OPTIONAL & KIT 0CS10-M49501 Fig.83
Remarks
* This figure is not applied after M01212.
Copyright (C) 2014 YANMAR GLOBAL CS CO., LTD. All RightsReserved.
0CS10-M49501 OPTIONAL & KIT 0CS10-M49501 Fig.84
vieraingenieria1@gmail.com 3014247434