Professional Documents
Culture Documents
wsfm2 9-12
wsfm2 9-12
9Ah)
Overview
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is
absorbed by separators and plates and thus immobilized. Should the battery be accidentally
overcharged producing hydrogen and oxygen, special oneway valves allow the gases to escape
thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is,
therefore, maintenance-free, leak proof and usable in any position.
Battery Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
End Point
Volts/Cell 5min 10min 15min 30min 1h 3h 5h
1.60V 26.46 17.15 13.72 8.15 4.28 1.66 1.05
1.65V 25.28 16.46 13.23 7.88 4.15 1.62 1.04
1.70V 23.91 15.68 12.64 7.58 4.01 1.57 1.02
1.75V 22.64 14.90 12.05 7.26 3.86 1.52 0.99
1.80V 21.36 14.01 11.47 6.91 3.68 1.46 0.96
Charged
Volume
Voltage
Current
Constant voltage charging
characteristic (0.25CA,25 ℃)
13.0
(%) (XCA) (V)
140
12.0
120 0.25
11.0 15.0 Charged Volume
Voltage(v)
100 0.20
10.0
0.51A 0.26A 14.0 Charge Voltage
0.77A 80
8.7A 5.8A 2.9A2.2A 0.15
13.0
9.0 60
0.10
40 12.0
8.0
20 0.05
11.0 Charging Current
0
0 1 2 3 5 10 20 30 60 2 3 5 0 1 30 0 0
min h 0 2 4 6 8 10 12 14 16 18 20
Discharge time Charging time (hours)
100
15.6
90
Cycle
Capacity(%)
15.0 Use
80
14.4
70
Standb
13.8 y Use
60
13.2 50
40
-10 0 10 20 30 40 50 60 0 2 4 6 8 10 12 14 16 18 20
Ambient temperature(℃) Storage time: months
100
100
80
Capacity(%)
Capacity(%)
80
60 60
Testing conditions:floating voltage:2.27 to 2.30V Cell 100% D.O.D. 50% D.O.D. 30% Depth of discharge
ambient temperature: 25oC(77oF)
40 40
20 20
100
C
0.05
80 0.1C
Capacity (%)
0.1
10 20 30 40 50 60
-20 -10 0 10 20 30 40 50
Temperature ( ℃) Temperature ( ℃)