You are on page 1of 11

Ducted Dehumidification

Systems

Dehumidifiers Australia
4 January 2022

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


CONTENTS
01 FD-S Series Ducted Dehumidifiers with Single Air Flow 2

02 FD-X Series Ducted Dehumidifiers with Fresh Air 5

03 FD-E Series Ducted Dehumidifiers with Heat Recovery 8

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


01 FD-S Series Ducted Dehumidifiers with
Single Air Flow

Description
FD-S Series is the single airflow type. FD-S Series are good in a wide range of
applications such as residential dehumidification, installation parallel with a HVAC system, or in
small pools, green houses, office areas, gyms, etc.

The air will pass through the refrigeration coil to remove excess moisture and prevent the
forming of mold and mildew. Condensation will be collected in the stainless-steel drain pan and
can be pushed out automatically with positive air pressure.

The FD-S dehumidifiers can double as an air purification system with a UV Lamp for
killing bacteria and virus. Three stage filtrations (G4, F7, H13 HEPA) can prevent mold, mildew,
dust and allergen particles down to 0.3µm, leading to a better smelling home without musty
odors and better health.

Return Air Supply Air

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


2
01 FD-S Series Ducted Dehumidifiers with
Single Air Flow

Key Features
q Single Air Flow Design
q Positive Pressure Drainage, no need for a water trap
q HEPA, UV Sterilization Lamp, Anion Generator
ü 3 Stage Filtration with G4, F7, H13 (HEPA) and Anion Generator to provide clean air, free of dust and
allergens
ü The UV Lamp provide sterilization to kill bacteria and viruses
q EC Fan Motor
ü EC Fan Motor allows for variable speed and quieter operation than other motor types
ü Power consumption is lower, increasing the efficiency of the dehumidifier
ü Precise control of fan speed to match your existing system or air flow requirements

q Advanced Wall Controller


ü The humidity sensor built into the controller gives the machine an accurate reading of indoor humidity
ü Built in RS485 interface can be used with BMS systems
ü Wi-Fi control through iOS/Android App

q No PCB design, 100% controlled by the controller


ü Easy and simple maintenance without PCB
ü Highly reliable and mature components are to maximize system stability and up time

Single Air Flow Working Principle

EC Fan

F7 G4
H13 HEPA
Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037
3
01 FD-S Series Ducted Dehumidifiers with
Single Air Flow

Specifications

FD-S Series FD-S28L FD-S40L FD-S60L FD-S100L FD-S140L


Capacity(30℃,80%RH) 28L/D 40L/D 60L/D 100L/D 140L/D

Supply air flow(m3/h) 280-350 500-670 650-780 1000-1200 1200-1350

Fan speed 2-speed/Variable Speed

Static pressure 100 Pa

Return air flow(m3/h) 280-350 500-670 650-780 1000-1200 1200-350

Power 400W 620 W 700 W 920 W 1160 W

Current 1.8A 2.8A 3.3A 4.3A 5.4A

Voltage 220V/50Hz

Control Touch Screen LCD Controller

Noise level <35DB <45DB <45DB <45DB <45DB

Compressor Embraco Embraco Embraco Panasonic Panasonic

Refrigerant R134A R134A R134A R410A R410A

Condenser Copper Tubes with Blue Hydrophilic-coated Aluminium Fins

Drain pan SUS304

Drain hole size DN20

FIlter G4(+F7+H13)

Purification UV Air Sanitizer + Anion Generator

Return air duct Φ100 mm Φ150 mm Φ150 mm Φ200 mm Φ200 mm

Supply air duct Φ100 mm Φ150 mm Φ150 mm Φ200 mm Φ200 mm

Body size 830*433*285 mm 950*539*265 mm 950*539*265 mm 1030*639*375 mm 1030*639*375 mm

Net weight 40kg 45kg 47kg 68kg 71kg

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


4
02 FD-X Series Ducted Dehumidifiers with
Fresh Air

Description
FD-X Series dehumidifiers introduce dried, filtered fresh air into the environment. The
FD-X series is perfect for residential, office, medical facility, and any situation that requires
positive fresh air pressure.

This system is also a suitable replacement for ventilation fans filling the room with fresh
air. In closed environments the supply of fresh air can help maintain oxygen levels and keep the
air from becoming stuffy.

The constant supply of fresh, purified, sterilized, dry air also helps to prevent allergies,
dust, viruses, bacteria, mold and other nasties from entering your environment.

Fresh Air
Return Air Supply Air

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


5
02 FD-X Series Ducted Dehumidifiers with
Fresh Air

Key Features
q Fresh Air Flow Design
ü Positive pressure air for fresh air ventilation
q Positive Pressure Drainage, no need for a water trap
q HEPA, UV Sterilization Lamp, Anion Generator
ü 3 Stage Filtration with G4, F7, H13 (HEPA) and Anion Generator to provide clean air, free of dust and
allergens
ü The UV Lamp provide sterilization to kill bacteria and viruses
q EC Fan Motor
ü EC Fan Motor allows for variable speed and quieter operation than other motor types
ü Power consumption is lower, increasing the efficiency of the dehumidifier
ü Precise control of fan speed to match your existing system or air flow requirements
q Advanced Wall Controller
ü The humidity sensor built into the controller gives the machine an accurate reading of indoor humidity
ü Built in RS485 interface can be used with BMS systems
ü Wi-Fi control through iOS/Android App

q No PCB design, 100% controlled by the controller


ü Easy and simple maintenance without PCB
ü Highly reliable and mature components are used to maximize system stability and up time

Fresh Air Flow Working Principle

EC Fan

F7 G4
H13 HEPA

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


6
02 FD-X Series Ducted Dehumidifiers with
Fresh Air

Specifications
FD-X Series FD-X28L FD-X40L FD-X60L FD-X100L FD-X140L
Capacity(30℃,80%RH) 28L/D 40L/D 60L/D 100L/D 140L/D

Supply air flow(m3/h) 280-350 500-670 650-780 1000-1200 1200-1350

Fan speed 2-speed/variable speed

Static pressure 100 Pa

Return air flow(m3/h) 140-175 350-460 470-550 680-800 750-850

Fresh air flow(m3/h) 140-175 150-210 180-230 320-400 400-500

Power 420W 670 W 740 W 1050 W 1300 W

Current 1.9A 3A 3.5A 4.9A 6.2A

Voltage 220V/50Hz

Control Touch Screen LCD Controller

Noise level <35DB <45DB <45DB <45DB <45DB

Compressor Embraco Embraco Embraco Panasonic Panasonic

Refrigerant R134A R134A R134A R410A R410A

Condenser Copper Tubes with Blue Hydrophilic-coated Aluminium Fins

Drain pan SUS304

Drain hole size DN20

FIlter G4 +F7 +H13

Purification UV Air Sanitizer + Anion Generator

Fresh air duct Φ100 mm Φ150 mm

Return air duct Φ100 mm Φ200 mm

Supply air duct Φ100 mm Φ200 mm

Body size 830*433*285mm 950*539*265mm 950*539*265mm 1030*639*375mm 1030*639*375mm

Net weight 34kg 45kg 47kg 68kg 71kg

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


7
03 FD-E Series Ducted Dehumidifiers with
Heat Recovery

Description

FD-E Series combines three functions (Humidity Control, HEPA & UV Air Purification and
Heat Recovery Ventilation with high efficiency) into one unit which reduces the complexity of
installation and saves money. They are the best air solution for high efficiency homes.

The dehumidifier can dry the indoor air as well as the fresh air coming from the
HRV(Heat Recovery Ventilation) and balance the fresh air and exhaust air flow to guarantee the
fresh air supply. The fresh air and exhaust air would have its heat exchanged through the thin
aluminum HRV core which is built in machines and it can make the supply air much more
comfortable with less heat loss increasing the thermal efficiency of your home.

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


8
03 FD-E Series Ducted Dehumidifiers with
Heat Recovery

Key Features
q Built in Heat Recovery Ventilation to help maintain temperature

q Positive Pressure Drainage, no need for a water trap


q HEPA, UV Sterilization Lamp, Anion Generator
ü 3 Stage Filtration with G4, F7, H13 (HEPA) and Anion Generator to provide clean air, free of dust and
allergens
ü The UV Lamp provide sterilization to kill bacteria and viruses
q EC Fan Motor
ü EC Fan Motor allows for variable speed and quieter operation than other motor types
ü Power consumption is lower, increasing the efficiency of the dehumidifier
ü Precise control of fan speed to match your existing system or air flow requirements
q Advanced Wall Controller
ü The humidity sensor built into the controller gives the machine an accurate reading of indoor humidity
ü Built in RS485 interface can be used with BMS systems
ü Wi-Fi control through iOS/Android App

q No PCB design, 100% controlled by the controller


ü Easy and simple maintenance without PCB
ü Highly reliable and mature components are used to maximize system stability and up time

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


9
03 FD-E Series Ducted Dehumidifiers with
Heat Recovery

Specifications

FD-E Series FD-E28L FD-E40L FD-E60L FD-E100L FD-E140L


Capacity(30℃,80%RH) 28L/D 40L/D 60L/D 100L/D 140L/D

Supply air flow(m3/h) 320~420 m3/h 650~780 m3/h 730~850 m3/h 1000~1200 m3/h 1200~1380 m3/h

Fan speed 2-speed/Variable Speed

Static pressure 100 Pa 150 Pa 150 Pa 150 Pa 150 Pa

Fresh air flow(m3/h) 100~150 m3/h 180~250 m3/h 280~360 m3/h 430~550 m3/h 580~720 m3/h

Return air flow(m3/h) 220~420 m3/h 400~780 m3/h 450~850 m3/h 570~1200 m3/h 770~1380 m3/h

Exhaust air flow(m3/h) 80 m3/h 120 m3/h 200 m3/h 300 m3/h 420 m3/h

Power 550W 720 W 850 W 1100 W 1380 W

Current 2.5A 3.2A 3.7A 5A 6.2A

Voltage 220V/50Hz

Control Touch Screen LCD Controller

Noise level <35DB <45DB <45DB <45DB <45DB

Compressor Embraco Danfoss

Refrigerant R134A

Condenser Copper Tubes with Blue Hydrophilic-coated Aluminium Fins

Drain pan SUS304

Drain hole size DN20

Filter G4+F7+H13

Purification UV Air Sanitizer + Anion Generator

Fresh air duct Φ150 mm Φ200 mm

Return air duct Φ150 mm Φ200 mm

Supply air duct Φ150 mm Φ200 mm

Exhaust air duct Φ150 mm Φ200 mm

Body size 1205*699*283 mm 1330*749*325 mm

Net weight 42kg 60kg 68kg 78kg 82kg

Web: www.dehumsaust.com.au | Email: sales@dehumsaust.com.au | Mob: 0447 728 037


10

You might also like