Professional Documents
Culture Documents
How to succeed in CCTV projects in 7 steps! _ Anixter
How to succeed in CCTV projects in 7 steps! _ Anixter
| Anixter
During consulting, I always hear the questions: "How many cameras will be used in the project?
Is it expensive? Can you give an estimate of the project cost?
The answers vary "I do not know, it depends, maybe ...." many professionals take into account
only the cost of the cameras, but forget all the other elements that make up a system of a closed
circuit television IP.
This article shows in seven steps what it takes to design and implement a system.
Before going out and determine the position of the cameras, determine what the objective of the
project is, the perimeter monitoring, process control, asset protection, among others. This is one
of the most important steps (and must be written), as it establishes all points of the project; on
80% of the projects the following target is heard: "I want a 100% coverage!" "I want to have HD
on all cameras" "I want to see everything!".
Here are some examples of goals unassigned, we will have greater chances that the project
does not materialize (due to high cost) or does not comply with the desire of the customer after
installation (dark targets).
Important: The target must be familiar to all, especially to those who sponsor the project and
operate the system.
2. Cameras locations
With the set goal, go to field for research and check the best location for the cameras, also check
possible interference that can adversely affect the images at the end of the project. Note that this
check can only be done while in Site, projects implemented through maps, charts or even
Google Maps cannot give the same result.
At the time, observe the lighting, if necessary indicate the use of projectors (LED, infrared),
choosing the right model for every application and document management BOM with brand and
model and lens of every camera along with the ground floor of the place, position each camera
and enter the field of vision of the same.
3. Infrastructure
The IP CCTV system requires an Ethernet network already in place at the site. If you have a
network in place that will be shared with the cameras, make sure that the network has conditions
to maintain all systems in operation. The network administrator should be involved in this step.
Are there any free ports on the switch for the new cameras?
https://www.anixter.com/en_mx/about-us/news-and-events/news/how-to-succeed-in-cctv-projects-in-7-steps.html 1/3
1/25/23, 11:57 AM How to succeed in CCTV projects in 7 steps! | Anixter
Does the Switch support this new traffic?
Is it PoE?
If there is an established network, create a new project and complement the above documents
(bill of materials and ground floor).
Important: The surge suppressors and grounding system must not be forgotten.
4. Administration
When the objective of the project is finalized, the administration of the system should be
assigned, which influences the choice of platform or monitoring software.
Will the system be in a single local access or a remote access? Is there only one Site or will they
have multiple locations with centralized management? Do we have contingency recording
images? Are there professional operating the system?
Today there are several manufacturers of CCTV software with similar functions, but they may
have different ways of licensing, for example, while a manufacturer only charges the amount of
cameras that are being managed and provide all other characteristics ( for example, remote
access, the number of customers, cell phone access, etc.) others may charge by the
characteristics through additional licenses.
5. Monitoring Center
Here is the heart of the system, and like all heart must be protected and must be working well.
Some of the points to be observed:
• Use servers: These devices are designed to operate 24 hours a day, as your security system,
and should be dedicated for this use, i.e. should never be shared with another application.
• On break: In addition to the cameras monitoring center, it should work in a power outage
situation, adjust the no-break system to keep all equipment in operation during faults.
• Technical Furniture: The hubs will not last if used office furniture, the right thing is the use of
technical furniture that has the durability to ensure the functionality for long periods.
If you have the best project, buy the best equipment market and do not hire specialized
companies for installation, it can go wrong. Always ensure that the professionals have training
and technical certification to install, set up and train on products.
7. Warranty
Remember, all equipment is worn out mainly by time, to minimize the effects, you only need a
preventive and regular maintenance. It is cheaper a preventive maintenance cost than the cost
of replacing equipment with corrective maintenance.
Another point are the spare parts, if their work is fundamental and cannot suffer outages, even if
faulty, it is best to keep some equipment in stock for replacement.
Following these steps you will succeed at the end of implementation. Of course, there are works
and projects with various complexities, but errors are minimized and with practice are eliminated.
Often we hear "It's ... cheap is expensive ...." but we assure you that with a well-done design,
goes even cheaper! Therefore, always consult your engineer!
Rafaela Silva
Sign Up
https://www.anixter.com/en_mx/about-us/news-and-events/news/how-to-succeed-in-cctv-projects-in-7-steps.html 2/3
1/25/23, 11:57 AM How to succeed in CCTV projects in 7 steps! | Anixter
Help Careers
Find a Location Corporate Responsibility
Request a Catalog Investor Relations
Email Us
Supplier Updates on COVID-19
Do Not Sell My Personal Information
ACCESSIBILITY
https://www.anixter.com/en_mx/about-us/news-and-events/news/how-to-succeed-in-cctv-projects-in-7-steps.html 3/3