white nylon or light green fuel pump drive coupling.
Install the drive
coupling (23).
Install the gasket, fuel
pump and four capscrews.
Tighten the capscrews.
Torque Value: 45 n.m [33 ft- lb]
Install the following
items:
z Fuel drain (1)
z Gear pump cooling drain (2) z Gear pump suction line (3) z AFC fuel drain (4) z Fuel supply to the injectors (5) z AFC air supply hose (6) z Tachometer cable (7).
NOTE: This step
applies only to engines equipped with STC.
Install the STC
pressure switch.
Connect the hose
to the switch and to the fuel pressure tube fitting on the fuel pump.
Gas-Engines and Producer-Gas Plants
A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines