Professional Documents
Culture Documents
Docu PSA AU54199 PP2679
Docu PSA AU54199 PP2679
dSPACE GmbH
Technologiepark 25
D-33100 Paderborn
Germany
support@dspace.de
www.dspace.com
Important Notice
This documentation contains proprietary information that is protected by copyright.
All rights are reserved. Neither the documentation nor software may be copied, pho-
tocopied, reproduced, translated, or reduced to any electronic medium or machine-
readable form, in whole or in part, without the prior written consent of
dSPACE GmbH.
This publication and the contents hereof are subject to change without notice.
Brand names or product names are trademarks or registered trademarks of their re-
spective companies or organizations.
dSPACE Simulator Mid-Size
• Via Start – Programs – dSPACE Tools (after installation of the dSPACE soft-
ware)
• At http://www.dspace.de/goto?supportwizard
You can always find the latest version of dSPACE Support Wizard here.
Contents
1 Overview ................................................................... 4
1.1 Scope of the Document .................................................................... 4
5 Notes ....................................................................... 10
1 Overview
1.1 Scope of the Document
This documentation describes the configuration of the extended Signal Conditioning
Hardware (SC) of the dSPACE Simulator Mid-Size. The description of the simulator
and its additional hardware components itself can be found in the standard dSPACE
documentation.
VBAT1
VBAT2
DS4302 Sub-D
Sub-D Function No./Pin
1 User-defined 4-1
2 CAN_L3 4-2
3 IGND3 4-3
4 User-defined 4-4
5 IGND3 4-5
6 IGND2 3-6
7 CAN_H2 3-7
8 User-defined 3-8
9 EXT_VCC 3-9
10 User-defined 2-1
11 CAN_L1 2-2
12 IGND1 2-3
13 User-defined 2-4
14 IGND1 2-5
15 IGND0 1-6
16 CAN_H0 1-7
17 User-defined 1-8
18 EXT_VCC 1-9
19 Not used -
20 IGND3 4-6
21 CAN_H3 4-7
22 User-defined 4-8
23 EXT_VCC 4-9
24 User-defined 3-1
25 CAN_L2 3-2
26 IGND2 3-3
27 User-defined 3-4
28 IGND2 3-5
29 IGND1 2-6
30 CAN_H1 2-7
31 User-defined 2-8
32 EXT_VCC 2-9
33 User-defined 1-1
34 CAN_L0 1-2
35 IGND0 1-3
36 User-defined 1-4
37 IGND0 1-5
For more information about the DS4302, refer to your dSPACE documentation
(%DSPACE_ROOT%\Doc\Print\DS4302Features.pdf).
3 DS4330 LIN-Interface-Board
The Simulator is equipped with a DS4330 LIN-Interface-Board. Sixteen LIN-channels
are available on the DS4330.
Fore more information about the DS4330 please refers to your dSPACE documenta-
tion (%DSPACE_ROOT%\Doc\Print\DS4330Features.pdf).
For the simulator, 12 LIN channels are routed to the spare pins of HYP3 of the load
& FIU drawer. The other 4 channels are not available on the HYPT3 connector be-
cause of the number of free pins is limited.
The following table shows the mapping of the LIN channels.
DS4330 HYP3
D-SUB Function Signal
1 UBAT1 E1
2 UBAT2 E2
3 UBAT3 E3
4 UBAT4 E4
5 UBAT5 E5
6 UBAT6 E6
7 UBAT7 E7
8 UBAT8 E8
9 UBAT9 E9
10 UBAT10 E10
11 UBAT11 E11
12 UBAT12 E12
18 LIN1 D1
19 LIN2 D2
20 LIN3 D3
21 LIN4 D4
22 LIN5 D5
23 LIN6 D6
24 LIN7 D7
25 LIN8 D8
26 LIN9 D9
27 LIN10 D10
28 LIN11 D11
29 LIN12 D12
4 DS662 Sideplane
The DS662 board is installed in the Mid-Size spare slots. It provides one slot for an
additional signal conditioning (SC) module.
5 Notes