Professional Documents
Culture Documents
Yzf-R1-07 Assembly Full ARMAR
Yzf-R1-07 Assembly Full ARMAR
These instructions apply only to the "YZF-R1". These Paper Craft parts
are easier to work with when printed out on strong, thick paper (like postcard
stock).
2007.11.12
Note
How to assemble
2
1 Assembling the Front Cowl & Front Fender
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Front Cowl Fold each relevant part according to the assembly symbols.
Sheet A, 8 parts in total Please use the dots on each component as reference when gluing surfaces.
A- 2
A- 6
2
A- 7
2
A- 8
3
A- 3
4 1 3
A- 4
A- 5
A- 1
B- 2
B- 3
3
2 Assembling the Meter & Brake Caliper
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Sheet B, 12 parts in total Please use the dots on each component as reference when gluing surfaces.
B- 6
B- 11
6 4 1
B- 13
3
B- 12
4 B- 7
2
7
B- 4 8
3 B- 8
2
5 B- 9
B- 14
B- 15
B- 17(20)
2
1
B- 18(21)
4
3 Assembling the Steering
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Sheet B, 19 parts in total Please use the dots on each component as reference when gluing surfaces.
B- 26 B- 22
B- 28
DO NOT glue the upper and the lower parts
of the steering column at this stage.
1 B- 25
B- 27
B- 34 B- 31
5
2 1
5
B- 32
2
B- 33
B- 24
B- 35
Reference photo
B- 36
3
4
B- 38
B- 37
B- 40
B- 30
B- 29
B- 39
5
4 Assembling the Frame 1
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Sheet C, 18 parts in total Please use the dots on each component as reference when gluing surfaces.
C- 6 C- 4
10
C- 8
7
C- 18
8
9 C- 16
C- 15
6 6
11
C- 17
C- 3 6
12
C- 1
8
C- 2 9
10
C- 14
4
12
3
C- 5
5 C- 7
C- 13
2 C- 12
C- 11
C- 9
C- 10 1
Reference photo
6
5 Assembling the Frame 2 & Fuel Tank
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Sheet B, 7 parts in total Please use the dots on each component as reference when gluing surfaces.
Reference photo
C- 19 C- 20
C- 24
C- 25
C- 21
C- 23
C- 22
D- 1
D- 2
7
6 Assembling the Under Cowl
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Under Cowl Fold each relevant part according to the assembly symbols.
Sheet E, 13 parts in total Please use the dots on each component as reference when gluing surfaces.
E- 8 E- 11
E- 6
3
E- 7
2
3
1
E- 10
3
2
7 4
3
E- 4 4
E- 9
4
4
E- 3
E- 1
E- 5
5
6 E- 2
6
6
E- 13
Reference photo
8
7 Assembling the Seat Cowl & Taillight
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Seat Cowl Fold each relevant part according to the assembly symbols.
Sheet F, 13 parts in total Please use the dots on each component as reference when gluing surfaces.
F- 10
9
F- 11
F- 9
1
2
F- 4
F- 3
3
3 F- 12
10 8 4
6
7
7
5 8
8
F- 5
F- 8 8
8
F- 13
F- 6
F- 7
G- 4
6
G- 7
1
2 G- 5
7 5
G- 6 7 2
G- 8 1
G- 2
8
G- 3
3
3
G- 13
G- 10
G- 11
G- 12
9
8 Assembling the Rear Suspension & Rear Arm
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Rear Suspension Fold each relevant part according to the assembly symbols.
Reference photo
Sheet C, 12 parts in total Please use the dots on each component as reference when gluing surfaces.
H- 4
5 H- 11
4 H- 7
H- 6
4 4
3
1 3
6
H- 5
H- 3
H- 8
2
H- 10
H- 9
Rear Arm I- 14
Reference photo
Sheet I, 15 parts in total
I- 8
6
8 13
7
12
11
I- 12,13
13
I- 5
I- 10
I- 1
9
I- 7 4
10 I- 4
1 3
2
I- 2 3
10
I- 3 I- 6
10
9 Assembling the Engine
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Engine
Sheet J, 34 parts in total
J- 8
J- 7
8
7 J- 9
J- 6
8
J- 26,27
J- 28 J- 20,21,22,23,24,25
7
J- 5
10 J- 29
J- 19
14
11 J- 30
J- 32
4
12
J- 33 13 J- 16
21
9 22
J- 4 20
J- 1 9
J- 14
J- 3 19
3 J- 31
18
6
J- 18
17
6 15
16
J- 34
23 2
J- 12
1
J- 2
5
J- 17
J- 11
J- 15
J- 13
Reference photo
11
10 Assembling the Radiator & Stand
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Sheet J, 18 parts in total Please use the dots on each component as reference when gluing surfaces.
Reference photo
J- 44
J- 43
J- 45
J- 42
J- 46
J- 47
J- 50
J- 52
J- 35
J- 51
* Do not paste J-48 & J-49.
J- 36
J- 48
J- 37 J- 49
J- 39
J- 40
J- 38
J- 41
5 K- 1
2
K- 9
K- 4
2
1
K- 10 K- 3
K- 6
4 3
4 1
K- 5
12
11 Assembling the Exhaust Pipes
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Exhaust Pipes Fold each relevant part according to the assembly symbols.
Sheet L, 60 parts in total Please use the dots on each component as reference when gluing surfaces.
L- 58
*Assemble both sides. The diagram L- 56
L- 60
shows the left side. The number inside
the ( ) is for the right side. L- 54
L- 52
L- 57
L- 50
L- 48
* Do not paste
L-52 & L-54.
L- 55
L-15(16) L- 36
L-5(6)
L- 46
L- 35
L-7(8)
* Do not paste
L-38 & L-41,46.
L- 34
L- 17(18)
L- 38
L-9(10) L- 33
L- 32
L-11(12)
L- 19(20)
L-13(14) L- 31
L- 30
* Do not paste L-30 & L-31.
L- 21(22)
L- 29
L- 23 (24)
* Do not paste L-13,14,L-27,28 & L-29. Reference photo
L- 25(26) L-27(28)
13
12 Assembling the Left footrests & Right footrests
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Left footrests Fold each relevant part according to the assembly symbols.
Sheet M, 6 parts in total Please use the dots on each component as reference when gluing surfaces.
M- 6
M- 1
M- 2
M- 4
M- 5
M- 3
3
M- 15 M- 14
M- 10
4
2
M- 16
M- 17
5
6
10
M- 13 9
8
M- 9
M- 12
M- 11
14
13 Assembling the Front Tire
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Front Tire Fold each relevant part according to the assembly symbols.
Sheet N, 17 parts in total Please use the dots on each component as reference when gluing surfaces.
5
1
N- 14
5
N- 17
N- 12
3
4
N- 8
N- 10
N- 2
N- 16
N- 3
N- 15
N- 6
3
N- 1
N- 9
N- 11
N- 5 N- 4 N- 7
N- 13
Reference photo
15
14 Assembling the Rear Tire
First, assemble each component by following the working
method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.
Rear Tire Fold each relevant part according to the assembly symbols.
Sheet O, 17 parts in total Please use the dots on each component as reference when gluing surfaces.
2 5
5
O- 17
O- 13
3
O- 11
O- 8
O- 9
O- 10
4
O- 2
O- 16
1 O- 12
O- 15
O- 1 O- 3
2
3
O- 6
O- 5 O- 7
O- 14 Reference photo
O- 4
16
15 Finish
Please use the dots on each component as reference when gluing surfaces.
Fuel Tank Seat Cowl Taillight
6
Connect each of the previously assembled parts in
order from 1 - 22 according to the diagram.
Front Cowl
7
1 Glue the radiator to the engine.
2 Glue the engine to the frame 1.
Frame 2
3 Glue the rear arm to the frame 1. Upper Steering Column Right 8
16
footrests
4 Glue the rear suspension 1 to the frame 1.
Meter 9
12
Exhaust Pipes3
Glue the rear suspension 2 to the frame 1. 10
5
Rear Tire
10
4
13
11 Glue the exhaust pipes 1 to the engine.
Front Fender 2
21
12
12 Insert exhaust pipes 2 into exhaust pipes 1 and 3.
Engine
13 Put the lower part of the steering through the frame and 2
glue it to the upper part of the steering. 3 20
14 Glue the meter to the frame 1.
Glue the under cowl to the frame 1. 16
15
Front Tire
Brake Caliper 17 Radiator Under Cowl
17
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
RIGHT FRONT
Exhaust Pipes Seat Cowl Fuel Tank
Sheet L, 60 parts in total Sheet F, 13 parts in total Sheet D, 2 parts in total
18
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
LEFT REAR
Front Tire Engine Rear Tire
Sheet N, 17 parts in total Sheet J, 34 parts in total Sheet O, 17 parts in total
19
16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.
FRONT BACK
Frame 1 Frame 2 Meter
Sheet c, 18 parts in total Sheet c, 7 parts in total Sheet B, 12 parts in total
20