Professional Documents
Culture Documents
Manual Termostato
Manual Termostato
86.0
1 2 3 4 6
Press and hold the
bring together technology,
materials to provide you with a safe, reliable product combined with
A (RED)
B (WHITE)
1. Power On/off: Press to turn the thermostat on/off. floor sensor. 》 arrow for 5 seconds to display the temp. of
GC is for water/gas boiler;
sleek, contemporary design. 60.0±3.0
Modbus
2. Manual & Programmable 8. Return To Factory Default
programming manual for comprehensive
50.1
Press the Reatore Manufacturer Defaults, you can reset thermostat.
Touch (mode) to change between manual mode and programme
thermostat. Please also INSTALLATION Steps:Open your app -go into your room - click menu on the top
ensure a suitably qualified person installs your thermostat and right corner - move to the end - Press Restore Manufacturer Defaults.
In programmable mode, the perio
Side During Power Off
50.1
Front Step 1. Keep power off. See Fig 1.
In the box you will find Back Unit: mm
When power is off, press and hold
Thermostat 1pc Screws 2pc on/off could not be adjusted. If the user want to change, please go to Then press to scroll through
User Guide 1pc Floor Sensor (2.5m) 1pc manual mode or programmable mode. 《 》
QC Passed 1pc In the mode of manual, press《》 to set the desired temperature. available
TECHNICAL DATA C Code Function Setting and options Default
ABOUT YOUR THERMOSTATS Touch the icon to set minute, hour and weekday (1 = Monday, 1
Temperature
-7 to + 7℃ (for internal sensor) -1
Power Supply: 95 ~ 240 VAC, 50 ~ 60HZ compensation
2 = Tuesday etc.) by using the 《 arrows. Press
The BHT-002 series range has been developed to control electric
Current Load:3A(
》 once more to 2 Deadzone
Temperature 1 ~ 5℃ 1
confirm and exit. 00: All buttons are locked except power button.
3 Button locking 01: All buttons are locked. 01
Sensor: NTC Step 3. Connect power supply, load into the appropriate terminals. 5. Locking your Thermostat In:Internal Sensor(to control or limit the temp.)
Press and hold the 《
Accuracy: ±0.5℃ or ±1℉ (see “Wiring your thermostat” for details and Fig 3). Ex:External Sensor(to control or limit the temp.)
MODEL DEFINITION Set Temp. Range: 5 -35℃ 》for 5 seconds to lock/unlock your thermostat
lock or half lock.
Sensor types Ou: Only external sensor
AL
GC: Water/Gas Boiler, 3A Dispaly Temp. Range: 5 ~ 99 ℃ the box. See Fig 4.
4 AL:Internal/ External Sensor(Internal sensor to
control the temp., external sensor to limit the
Ambient Temp.: 0 ~ 45 ℃ P S temp.)
Ambient Humidity: 5 ~ 95 % RH (Non Condensing) 5 Min. Set Temp. 5-15℃ 05
L: Backlight
P: Weekly Programmable Storage Temp.: -5 ~ 45 ℃ 6 Max. Set Temp. 15-45℃ 35
accept the program schedule made via the APP on your device (see
W: Wifi 7 Display Mode 00:Display both set temp. and room temp. 00
01:Display set temp. only
Timing Error: < 1%
Low temperature 00
Shell Material: PC +ABS ( flame retardant) your thermostat (NOT via your smartphone/tablet) simply follow the 8 protection setting. 0-10℃
S2: Both internal sensor and floor external sensor as below: 9 High temperature
protection setting.
25-70℃ 45
For example: BHT-002 GCLP Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm2 00: Non-energy saving Mode
20 A Economy Mode
01: Energy saving mode
0