Professional Documents
Culture Documents
Update Dual Screen Procedure
Update Dual Screen Procedure
蘇傳富 201412
• 1.Prepare
USB disk(8G bytes or more)
keyboard
Page: 2 / 2
Update Procedure
Dual screen update procedure
Step 1:Download file to pc
Step 2:Unzip file to pc
Step 3: make a “USB Flash Drive” boot disc(Execute HPUSBDisk.exe)
Step 4: copy 4 files to USB flash disk(***.gho, Automatic.bat, Config.sys, Ghost.exe)
Step 5: Boot screen for setup key (press DELETE key) to enter BIOS panel.,and
setting Hard Drive BBS Priorities.
Step 6: Save settings and exit BIOS
Step 7: Reboot ,Press the “Enter” key to recover system.
Step 8: finish,remove usb Disk
Step 9: Rebooting and select controller type
Step 10: Setting I/P address
Page: 3 / 2
1.Down load new version
• 1.Down load new version on Hartford
e_marketing
1.1 Select commissioning & maintenance
Page: 4 / 2
1.Down load new version
1.2 Select Dual screen
Page: 5 / 2
1.Down load new version
1.2 Download all files and save on personal computer
Page: 6 / 2
1.Down load new version
1.3 Download finish *** File name is depend on dual screen software version
Page: 7 / 2
1.Down load new version
1.4 Unzip files
Page: 10 / 2
1.Down load new version
1.6 Check file on folder
Page: 11 / 2
2. Make a “USB Flash Drive” boot disc
• 2. Make a “USB Flash Drive” boot disc (sometimes called a
startup disk)
Page: 12 / 2
2. Make a “USB Flash Drive” boot disc
2.3 set HP USB DISK storage Format tool
Page: 13 / 2
2. Make a “USB Flash Drive” boot disc
2.3 set HP USB DISK storage Format tool
Page: 14 / 2
2. Make a “USB Flash Drive” boot disc
Page: 15 / 2
2. Make a “USB Flash Drive” boot disc
2.4 Copy three files to flash disk(autoexec.bat,config.sys,Ghost.exe)
Copy 3 files
Page: 16 / 2
2. Make a “USB Flash Drive” boot disc
2.5 Past three files to flash disk(autoexec.bat,config.sys,Ghost.exe)
Page: 17 / 2
2. Make a “USB Flash Drive” boot disc
2.6 Copy file *****.GHO to flash disk
Page: 18 / 2
3. System recover(ghost)
3. Update Dual screen software procedure
3.1 Plug in the usb disk to dual screen USB port(use step 2.5
USB disk)
3.2 plug in keyboard to dual screen USB port
Page: 19 / 2
3. System recover(ghost)
3. Before update system, record the ip address
Page: 20 / 2
3. System recover(ghost)
3.3 power on and press delete key
<step1> Select “Boot” Hard Dive BBS Priorities.
Page: 21 / 2
3. System recover(ghost)
<step2> Enter on the First Boot device and select your USB flash drive as
first boot device.
Page: 22 / 2
3. System recover(ghost)
<step3> Save settings and exit bios.
Save &Exit Save Changes and Reset Yes
[NOTE] Computer will restart.
Page: 23 / 2
3. System recover(ghost)
<step4> Rebooting
Page: 24 / 2
3. System recover(ghost)
Page: 25 / 2
3. System recover(ghost)
<step5> When “Recovery Finish,
please remove the USB flash drive” display, please remove USB flash drive
and restart computer.
Page: 26 / 2
3. System recover(ghost)
Page: 27 / 2
3. System recover(ghost)
<step7> Select controller type(depend on the controller type)
FOR MITSUBISH
FOR FANUC
Page: 28 / 2
3. System recover(ghost)
<step8> after select
Page: 29 / 2
3. System recover(ghost)
Page: 30 / 2
3. System recover(ghost)
Page: 31 / 2
3. System recover(ghost)
Page: 32 / 2
3. System recover(ghost)
<step12> Finish
Page: 33 / 2
Thanks for Your Attention!!
Page: 34 / 2