Professional Documents
Culture Documents
For translating from Catia V5 to Robcad just use Robcad's Data CAD import menu. However, for translating from Robcad to Catia V5 you need to use a Command window (e.g. DOS). Follow the steps below: 1. Pick Start --> All Programs --> Accessories --> Command Window. 2. Type: Drive letter and colon (e.g. C: ) then press the Enter key. 3. Type: cd << path where component is located >> (e.g. cd C:\data\robcad) then press the Enter key. 4. Type: cat5_out << component name >> (e.g. cat5_out s555555.co) 5. A CGR file will be created inside a folder named after the Robcad component name without the ".co" extension. 6. Open Catia and insert the CGR file in to a Catia Product session. Pick Insert --> Existing component. Note, you can also perform cat5_out on a cell.
1 of 2
4/25/20008
Revision Date
4/25/2008
Submitted By
9521
2 of 2
4/25/20008