Professional Documents
Culture Documents
The Konarka Power Plastic Solar Bag Panel (1.2W/8V) is ideal for charging batteries for portable electronic devices. Integrate into products such as luggage, backpacks, bags, and accessories.
254mm 346mm
Material Characteristics
Power Plastic is a lightweight, thin-lm photovoltaic material that is much more versatile in application than traditional solar panels. Konarkas unique technology is based on patented photo-reactive materials made from conductive polymers and organic nano-engineered materials. These materials can be printed or coated onto exible plastic using an inexpensive, energy-e cient manufacturing process. Power Plastic reacts with both indoor and outdoor light, greatly expanding its potential applications. By integrating Power Plastic into everyday products, devices can produce their own low-cost source of renewable energy.
Construction Characteristics
Operating temperature range: -20C to 65C (-4F to 149F) Weatherproof materials User friendly design: Easily integrated Laminate encapsulation: High light transmissive polymer Power terminals: Option 1: Solderable leads Option 2 and 3: Pre-wired and available with felt backing for easy product integration
Front
150
Current (mA)
1,000 W/m2 900 W/m2 800 W/m2 700 W/m2 600 W/m2 500 W/m2
100
50
0 0 2 4 6
Voltage (volts)
Outdoor Performance
8 10 12
Electrical Data
Pmax Impp Vmpp
Units
W mA V V mA
1 Sun
1.2 156 7.9 11.3 194
1/2 Sun
0.6 78 7.6 10.9 97
1.0
Power (W)
1,000 W/m 900 W/m2 800 W/m2 700 W/m2 600 W/m2
2
Voc Isc
500 W/m2
Temperature Range
Operating Temperature
-20C to 65C (-4F to 149F) -40C to 75C (-40F to 167F)
0.5
Storage Temperature
0.0 0 2 4 6
Voltage (volts)
10
12
Temperature Coefficients
Pmax Vmpp Voc
+0.05% / C (based on air temperature) -0.27% / C (based on air temperature) -0.21% / C (based on air temperature)
Konarka Power Plastic takes light in and delivers power out. When integrated into products, this direct current (DC) electrical energy can be used immediately or stored for later use.
The initial electrical characteristics are within +/- 10% of nameplate values under standard test conditions.
Headquarters: Lowell, MA, USA Manufacturing: New Bedford, MA, USA R&D Facilities: Lowell, MA, USA; Linz, Austria; Nrnberg, Germany Sales Offices: Lowell, MA, USA; Nrnberg, Germany; Tokyo, Japan Contact us via www.konarka.com or call +1-978-569-1400
This is intended only as a product summary. Contact Konarka for further details.
PD-SP-011 Rv 2 30Mar11
2/2