Professional Documents
Culture Documents
CUSTOMER: ……………………………….
Solar battery:
150AH/12V X 4 batteries with 3 years warranty
3 Make: Solario
Important Facts:
Schedule: Completion of project within Ten (10) days from date of Purchase order and Advance.
Solar cells produce direct current (DC) electricity using light, which can be used to power
equipment or to recharge a battery. Cells require protection from the environment and are
usually packaged tightly in-between a glass sheet and a Tedlar based back sheet. When more
power is required than a single cell can deliver, cells are electrically connected together to form
photovoltaic modules, or solar panels. A photovoltaic module is a package inter connected
assembly of photovoltaic cells, which converts sunlight in to electrical power. The cells are
hermitically sealed between glass and back sheet (Tedlar) to protect them from harsh
environments.
Characteristic Value
Maximum Power 250Wp
Open-Circuit Voltage (Voc) 37.1 V
Maximum Power Voltage 30.2V
Short-Circuit Current (Isc) 8.7 A
Maximum Power Current
(Imp) 8.28 A
Efficiency >15%
Power Tolerance ±3%
Temperature coefficient -0.44%/Kelvin
Temperature coefficient of Voc -2.13 mV/Kelvin
Temperature coefficient of Isc 4.46 mA/Kelvin
Operating Temperature 47+ 2
Certifications: ISO 9001:3008, ISO14001:3004, OHSAS18001 certified factory IEC61215, IEC61730, IEC
61701, IEC 61215, MCS Certified and UL 1703 for USA & CEC certified products.
The RPI is a high-quality String inverter which is used to supply photovoltaically converted solar
energy from PV modules to low-voltage networks. The string inverter converts the direct current
generated in PV cells into alternating current. This enables you to feed the solar electricity which you
have generated into the public electricity grid of the utility company. The efficient MPP tracking
system ensures that the PV plant operates sat maximum efficiency, even on dull days when the sky
is cloudy.
With the MPPT concept, PV modules connected in series (strings) or strings at the same voltage
connected in parallel area always connected to the string inverter so that the amount of wiring in the
photovoltaic plant issue abstantially reduced. The photovoltaic plant can also be optimized to the
input voltage range of the string inverter by the interconnection in the strings. The modules are
design of the string inverter take sin to account the market requirements for flexible inverter
solutions with higher output ranges.
BATTERY BANK:
Battery Make Type Description of Items Warranty
Solario Tubular Batteries 150AH/12V X 4nos. 3 yrs.
We integrate all the small and large equipment’s required for the commissioning of the solar power plant. All
equipment’s including cablings and the installation methodology are followed as per the installation guidelines
and manual by the Panel manufactures. The other equipment’s are IEC and TUV certified.
The cables deployed will be robust and resist high mechanical load and tension. High temperature resistance
and weather proofing characteristics will provide long life. The connectors will have high current carrying
capacity.
Earthing: The array structure of the PV yard will be grounded properly using adequate number of
earthing kits. All metal casing /shield in got the plant shall be thoroughly grounded to ensure safety of
the power plant.
Lightning Protection: The SPV Power Plant will be provided with lightning & overvoltage protection. The
main aim in this protection shall be to reduce the over voltage to a tolerable value before it reaches the
PV or other sub system components. The source of over voltage can be lightning, atmosphere
disturbances etc. Metal oxide varistor shall be provided inside the Array Junction Boxes. In addition
suitable MOV’s also shall be provided in the Inverter to protect the inverter from overvoltage.
Electrical:
Fire-proof hose shaft will be used for running electrical cables down to the electrical panel room.
Metering:
PV Array Energy Production: Digital Meters shall log the actual value of AC/DC Voltage, Current & Energy
generated by the PV system shall be provided.
Mounting Structure options of Hot Dip GI, Aluminum rails for sheds or Fiber Glass.
The frames and leg assemblies of the array structures are made after sections of angle, channel or any other
section confirming to IS 3062. Hot dip galvanized steel nuts and bolts will be used to fix the structures. The
structure is designed in such a way that it will occupy minimum space without sacrificing the output from
Solar panels.
THANK YOU