Professional Documents
Culture Documents
G1
E2
E1
E3
E4
E6
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
E7
E8
E5
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C10 C3 C6
C5 C4 C7 C13
C12
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C22
C15 C7
C14 C9 C2 C8 C11
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C49 C46
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C48 C47 C45 C39 C37 C34 C54 C46 C52 C50 C31 C44 C33 C41 C36 C32
C51
Soldering Jig
*Note: Solder top and bottom bars together first, then add two supports.
R16,R17,R18,R19
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
Soldering Jig
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
* Note Solder with the C55&C73 Joint in the vise to keep heat away from it Use Small solder..
Soldering Jig
c26
c25
c24
c23
1.369"
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
1.626"
Soldering Jig
C23,C24,C25, C26
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
Soldering Jig
C34,C35 to Frame
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
* Note place gauge between top bars and the C36 sprue to get correct mounting height.
* Note place gauge between top bar and C38 to mark placement.
Soldering Jig
C59 Placement
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
*Note place template between bars of main rollbar, and black lines denote where C60 and C61 should be soldered on the bottom.
C60,C61 Placement
Soldering Jig
C63 Placement
Soldering Jig
*Note bottom aligns with the roll bar (C57) and lines denote the INSIDE of where C56 and C58 should end up.
C58,C56 Placement
Car Front
C66,C67,C68,C69 Placement
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
[Torch Solder]
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
C7 Placement
Soldering Jig
R15 spacer
0.196"
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Cuttin jig setup for R9 (5/32 tube). Use 1/8 Drill bit as a shaft for the 5/32 material to sit on while being cut. Mount drill bit so it is just off the cutting wheel, put the 1/32 spacer (the yellow Garolite piece) over the shaft.
0.1119"
R9
5/32 Tube .014 Wall
R9
Cutting Jig Images/Notes.
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
*Note Solder top two bars together first, then add the two inside support bars..
R16,R17,R18,R19
C56
C62
C63
C57
C66
C60
C59
C64
C67
C72
C61
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C55-C85
C73
C75 G C77
C73
C74
C79
C80 G
C55
C77
C79
C78
C76
C81
C83
C84
C82
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C85
C84
C82
C85 G
B01
B04
B07
B06
B05
B08
B09
B10
B11
B03
B13
B14
B15
B12
B02
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
B16
B21
B17
B31
B22
B18
B27
B30
B25
B24
B19
B26
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
B23
B28
B29
B20
B38
B34
B36
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
B37
B32
B33
B35
0.328"
25.1950 degrees
1/16 rod
C8 (x2)
3/32 rod 1.5755" 23 degrees 1.5755"
C10
3/32 rod 0.4730"
side view
C12
3/64 Rod
C14
3/64 Rod
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
5.0186"
3/32 rod
C1
C3 (x4)
1/16 rod 55.3 degrees
1/16 rod 12
C4
0.250
35 degrees
Fence Line
C2
1/16 rod
C9 (x2)
C5 (x2)
1/16 rod
1.437"
50.9 degrees
34 degrees
C11
0.5162"
37
Bend Mark
37
C29 (x4)
1/16 SQ bar or tube
C33
16.71 degrees
23
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
33.0 degrees
23.3 degrees
C17
3/32 rod
C18
C19
0.230"
0.2889"
37
C22 (x2)
.047 3/64 rod
37
0.3260"
C28 (x2)
0.5147"
0.7874"
1/16 rod
6
1.128"
C58
1/16 rod
0.979
C60
2.320" 27@90
84
C64
1/16 rod
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
2.1665"
1.6860"
1.8100"
C40 (x3)
1/16 rod
0.275" 35.13 degrees
C47 (x2)
1/16 rod
0.751"
C48 (x2)
.047 or 3/64 rod
11 degrees
C50
11
C52
1/16 round rod
37
C56
.020 rod
1/16 square
0.564"
C80
1.523"
1/16 rod
C81
C82
1/16 rod
0.825"
2.500"
C83
1/16 rod
C84
C86
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
2.376" 0.910"
2.320" 84
Angle down, 86.5 deg. CCW.
12 27@90
29
14
Angle UP, 95 deg. CW.
30@90
C64
1/16 rod
0.752"
C65
1/16 rod
1.406"
C66
0.678"
1.010"
14
27
.047 3/64 rod
10
31
.047 3/64 rod
13
30
12
28
.047 3/64 rod
C67
C68
3.250"
C69
C70
1.413"
C71
C55
3/64 .047 square
0.582" 3.250"
C73
3/64 .047 Square Rod
0.227" 0.211" 18.30 deg
C74
.020 rod
C75
C76
C77
C79
0.215"
1mm tube
F29
F31
28.95 degrees
R9
5/32 Tube .014 Wall
R10
R16
3/64 .047 tube .006 wall
R17
R18
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
0.357"
0.1250" 0.949"
55
34
Angle UP, 27 deg CW
C87
1/16 rod
C88
3/32 .014 wall brass tube
C89
3/64 round rod
C90
.030 rod
1.2956"
0.1100"
37
53
C91
.040 rod
C92
.040 rod
D1
1/16 tube .014 wall
F11
1/8 tube .028 wall
0.2500"
0.6600"
F12
F14
F19
F21
2.504" 53.40 degrees 36.6@90 53.40 degrees 36.6@90 53.40 degrees 36.6@90 61 degrees 29@90 4.82 degrees
16.90 degrees
*Note cut sharp degree first on multiple stock bars, then setup deadman for the 16.9 degree cut and cut the other side. 1/16 round rod
C20
C21
C47
3.211" 0.329"
0.250"
Clear Polycarbonate
Spoiler
C00
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
0.329"
R26 (x4)
.025 rod
R29 (x2)
3/64 .047 tube .006 wall
R30 (x2)
3/64 .047 tube .006 wall
0.250 in
0.250 in
R31 (x2)
1/8 Tube .028 Wall
R32
R33
J2 (x4)
1/16 Sq. Tube .014 wall
J3 (x4)
3/32 Sq. Tube .014 wall
0.789"
0.522"
C87-C93
C93
C89
C90
C88
C91
C87
C88
C90
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C86
C92
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
F1-F6
F6
G1
F5
F4
F2
G1
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
F1
F3
F7-F17
F7
F16
F9
F8
F13
G2 F12 F16
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
F18-F20
F18
F19
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
G3
F21-F23
F21
F22
F23
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
F20
G10
F24
G10
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
F26
F Assembly Parts F24-F26 6 Part Numbers 7 Total Parts 2 per car, 14 parts/car
F24
G60
F27
G60
G10
F27
G60
G10
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
F28-F33
F33
F31
F32
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
F30
F29
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
R35
R34
R33
R32
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
R31
R07-R14
G1
R12
R13
G1
R11
R7
R10
R8
R7
R9
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
R7
R14
R15-R22
R20
R22
G R21 R16 R17 R18 R19 G21 G1 G21 G G61 R23 G61 G
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
R15
G1
R27
R26
R24
R24
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
R25
G1
R28
R29-R30
g R29 g
R30
g Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited. g
R22
g Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited. g
J1
J2
J3
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
.25p
J4
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
C4 to Frame
Soldering Jig
Soldering Jig
R31
Wheel
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
REAR PIECE
2.445"
3/64 Rod
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Left Top
Right Top
0.375"
.032 Holes
Left Bottom
Right Bottom
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
U-Joint
c c
a a a a
d d
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
b b
Seatbelts
1.469"
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
2.00"
0.500"
0.400"
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Top View
Top View
Side View
Side View
Valve Cover
Decal Size Template
1.150"
.100
.082
.050 1.640"
Top Pulley
Bottom Pulley
Alternator Pulley
Motor Pullies
Hole Drill Guide
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
2.580"
.875 0.500"
1.900"
Drive Line 1
1/16 Brass Tube - .014 Wall
Drive Line 2
3/32 Brass Tube - .014 Wall
0.950"
GPV-3
1/16 Round Rod
0.900"
GPV-4 (x2)
.032 Round Rod
GPV Assembly.
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
0.296"
.040 Hole
GPV-1
1/16 Round Rod 1/16 Brass C-Channel
GPV-5
1.400"
GPV-2
1/16 Round Rod
GPV-6
1/16 Round Rod
GPV-1 test
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Jig Template
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
M11
M7
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Bloomquist Modifications.
BQ Frame
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
BQ Frame Rails
Soldering Jig
Soldering Jig
BQ Assembly
BQ19
BQ18
BQ20
BQ21
BQ1
BQ22
BQ5
BQ10
BQ5
BQ14
BQ13
BQ14
BQ16
BQ12
BQ13
BQ11
BQ12
BQ8
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
BQ7
BQ8
BQ3
BQ2
BQ15
BQ4
BQ6
BQ17
BQ9
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
Soldering Jig
Soldering/Placement Jig
0.984" 44 degrees
BQ14 (x2)
.047 Round Rod
BQ19
1/16 Square Tube
BQ21
1/16 Square Tube
0.560"
BQ17
1/16 Square Tube
38 degrees 52 degrees 0.207"
13 degrees
BQ15
.047 Round Rod
BQ16
1/16 Round Rod
1.303"
BQ18
1/16 Square Tube
BQ20
1/16 Square Tube
BQ22
1/16 Square Tube
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
54 degrees
BQ1
BQ2
BQ3
BQ4
2.532" 0.978" 13 degrees 54 degrees 36@90 *Note Cut to 1", then mark fence line and cut the 13 degree side. 36@90 1.086" 54 degrees
1.243" 17 degrees
54 degrees 36@90
BQ5 (x2)
1/16" Round Rod
1.500"
BQ6
BQ7
BQ8 (x2)
1/16" Round Rod
1.227"
1.374"
BQ9
1/16" Round Tube .014" Wall
BQ12 (x2)
1/16" Round Rod
BQ13 (x2)
.047 Round Rod
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.
BQ Frame Rails
Soldering Jig
Soldering Jig
Data contained in this document is confidential information property exlusively of Intersection Replicas. Duplication Prohibited.