Professional Documents
Culture Documents
Caution
822
Applications
ON/OFF for pilot air Operation for single acting air cylinders and air grippers Filling or exhausting of air tank ON/OFF for air supply (125HO) ON/OFF for air jet and air blowing
Foot valves
829
A holding mechanism maintains the unit in an operating condition, which can then be released by pushing a foot-operated latch located back of the pedal (250FL, 250-4FL, 25034FL).
Applications
Operation for double acting air cylinders and air grippers ON/OFF for pilot air (Double air-piloted valve)
823
Manual valves
828
Using nuts enables compact installation on panels (125V). A vacuum valve with a non-leakage structure is also available.
Applications
ON/OFF for pilot air Operation for single acting air cylinders and air gripper Filling or exhausting of air tank ON/OFF for air supply ON/OFF for air jet and air blowing
Operation of double acting air cylinders and air grippers (In the neutral position, the air cylinder and air gripper are in the free condition, and can be operated manually). A vacuum valve with a non-leakage structure is also available.
Sliding valve construction, and manually switched 4-port valve. Rotary type (swing lever) for reliable switching.
Applications
For switching air cylinders
Applications
Switching of pilot air Switching of air supply
Micro valves
833
Using nuts enables compact installation on panels (125B). A vacuum valve with a non-leakage structure is also available.
Sturdy structure capable of withstanding harsh operation. Offers smooth pilot air switching.
Applications Applications
ON/OFF for pilot air Operation for single acting air cylinders and air gripper Filling or exhausting of air tank ON/OFF for air jet and air blowing ON/OFF for pilot air Operation for single acting air cylinders and air gripper Filling or exhausting of air tank ON/OFF for air jet
Both normally closed and normally open types are available for 2-port and 3-port valves, to ensure applications of using every type of pneumatic signal. Virtually no change in operational force from low to high pressure range. No neutral position means smooth switching between the A port and R port.
Applications
Confirms operations in pneumatic control circuits. Switches air pressure signals. Operation of air cylinder Filling or exhausting of air tank
824
MANUAL VALVES
Push Button Type
Symbols
Spring return 2-port NC NO NC 3-port NO Spring return with holding mechanism 2-port 3-port NC NO NC NO
Normal condition
Plug here for 2-port
Operating condition
(Normally closed) (Normally open) (Normally closed) (Normally open) (Normally closed) (Normally open) (Normally closed) (Normally open)
3 R 2 A 1 P
3 R
2 A
1 P 2 A
1 P 2 A
Valve body
1 P
125P-2 125P-2-11 125P 125P-11 250P-2 250P-2-11 250P 250P-11 125HO-2 125HO-2-11 125HO 125HO-11 2503P-2 2503P-2-11 2503P 2503P-11
Specifications
Operation type Item Port size Media Basic model 125P Rc1/8 Spring return 250P Rc1/4
Spring return with holding mechanism 125HO Rc1/8
3 R
2 A
3 R
Proof pressure MPa {kgf/cm2} [psi.] Operating temperature range C [F] (atmosphere and media) Effective area mm2 5.5 Flow coefficient Cv 0.27 mm [in.] 0.8 [0.031] Valve stroke Lubrication kg [lb.] 0.10 [0.22] Mass Options . . . . . . .Order codes
2-port . . . . . . .2 Normally open . . . . . .-11 With lock nuts for panel mounting . . .-22
2503P Rc3/8 Air 00.9 {09.2} [0131] 1.35 {13.8} [196] 560 [41140]
1 P
1 P
15 5.5 0.76 0.27 1.6 [0.063] 0.8 [0.031] Not required 0.20 [0.44] 0.25 [0.55] 0.10 [0.22] 2-port . . . . . . . . . . . . .-2 2-port . . . . . . . . . . . .-2 Normally open . . . . .-11 Normally open . . . .-11
With lock nuts for panel mounting . . . .-22
Materials Aluminum alloy (anodized) Brass Synthetic rubber Nylon (Steel in 125HO)
Dimensions
125P
M261.5
(mm)
30 23
125HO
M261.5
8 3-Rc 1
30 23
7.5
7.5
30.5
3 R
Basic model Basic model Port size 125P Rc1/8 250P Rc1/4 2503P Rc3/8 125HO
Rc1/8 (with holding mechanism)
2.6
16
Basic model
Option
Specifications
3-port, normally closed
4-5.5 Mounting hole
3 R
32
2.6
3 R
32 45
2 A
Flow Rate
125 series
Valve outlet pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Supply pressure MPa 0.9 0.8 0.7 0.6
32 45
32 45
250 series
Valve outlet pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Supply pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 400 800 1200 1600 2000
Note: For the normally open type, the exhaust port 3(R) is on the opposite side.
Note: For the normally open type, the exhaust port 3(R) is on the opposite side.
2250P 2503P
3-Rc 1 4 3 3-Rc 8
42 (46) 23
48 57.5
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 275R/min [9.71ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 740R/min [26.1ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
2 A
3 R
1.2
3 R
40
2 A
1 P
0
14.7 [3.30] 6.9 [1.55] 26.5 [5.96]
0.2 21.6 [4.86] 30.4 [6.83] 14.7 [3.30] 21.6 [4.86] 44.1 [9.91] 42.2 [9.49]
0.4 28.4 [6.38] 44.1 [9.91] 21.6 [4.86] 36.3 [8.16] 64.7 [14.54] 53.0 [11.91]
0.6 36.3 [8.16] 58.8 [13.22] 28.4 [6.38] 50.0 [11.24] 88.2 [19.83] 65.7 [14.77]
0.8 143.2 [9.71] 172.6 [16.32] 136.3 [8.16] 158.8 [13.22] 116.7 [26.23] 185.3 [19.18]
40 57
Notes: 1. For the normally open type, the exhaust port 3(R) is on the opposite side. 2. Dimensions in parentheses ( ) are for the 2503P.
825
57
3 R
1 P
45
2 A
1 P
16
2 A
30.5
1 P
3 R
1 P
2 A
48.7
Order Codes
3-Rc1 8 46
MANUAL VALVES
Lever-operated Type 2-, 3-port
Inner Construction, Major Parts and Materials
2-port NC/NO
(both normally closed and normally open use)
Symbols
3-port NC/NO
(both normally closed and normally open use)
Operating condition
2 A
1 P
2 A
1 P 3 R
Specifications
Item Port size Media
Operating pressure range
Basic model
125V Rc1/8
250V
2503V
Proof pressure MPa {kgf/cm2} [psi.] Operating temperature range C [F] (atmosphere and media) Effective area mm2 Flow coefficient Cv Valve stroke mm [in.] Lubrication Mass kg [lb.] Options . . . . . . .Order codes
Rc1/4 Rc3/8 Air 00.9 {09.2} [0131] 1.35 {13.8} [196] 560 [41140]
Dimensions
125V
(mm)
2250V 2503V
44.0 30 Close Open Red painted circle on upper side: Open 3-Rc1/8
3 R
50.5 5.5
Open 90
80
Close
Order Codes
Basic model Basic model Option Basic model 125V 250V 2503V Port size Rc1/8 Rc1/4 Rc3/8 Option Code Blank 2 22 Specifications 3-port 2-port
With lock nuts for panel mounting (125V only)
7.5
72.3
M261.5 30.5
48 57.5
2.6
16
2 A 30
2 A
3 R
2 A
1 P
Flow Rate
125 series 2250 series 2503 series
Valve outlet pressure MPa Supply pressure MPa 0.9 0.8 0.9 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 0.1 0.1
32 45
40 57
Supply pressure MPa 0.9 0.8 0.9 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 0.1 0.1
Notes: 1. Although the 125V lever is set on the 1(P) port side in the normal condition, it can be positioned in 360 range. 2. Dimensions in parentheses ( ) are for the 2503V.
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 275R/min [9.71ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 740R/min [26.1ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
40 57
3 R
1 P
2 A
826
42 46
32
45
1.2
25.5 30.3
1 P
1 P
109.5 119.0
20 sphere
34 sphere
3 R
MANUAL VALVES
Lever-operated Type 3-position, 5-port
Inner Construction, Major Parts and Materials
5-port (Exhaust center)
Normal condition Lever
4 A 2 B 5 R1 1 P 3 R2
Symbol
250-4H, 2503-4H
5 R1
3 R2 2 B 1 P
Specifications
Item Port size Media
Operating pressure range
4 A
Basic model
250-4H Rc1/4
2503-4H
Proof pressure MPa {kgf/cm2} [psi.] Operating temperature range C [F] (atmosphere and media) Effective area mm2 Flow coefficient Cv Valve stroke mm [in.] Lubrication Mass kg [lb.]
Rc3/8 Air 0.10.9 {09.2} [15131] 1.35 {13.8} [196] 560 [41140] 15 0.76 1.6 [0.063] Not required 0.6 [1.3]
Operating condition
5 R1 4 A
3 R2 2 B 1 P
Order Code
Basic model Basic model Basic model 250-4H 2503-4H Port size Rc1/4 Rc3/8 Parts Body Stem Diaphragm
Dimensions
(mm)
Flow Rate
Valve outlet pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Supply pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 400 800 1200 1600 2000 Flow rateR/min (ANR)
71.5
71.5
Red painted circle on upper side: Open
ON
60 60
ON
45
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 740R/min [26.1ft.3 /min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
5-Rc 1 4 5-Rc 3 8
1 P 5 R1
22.5
134
3 R2 3 R2
12
21
21
1 P
5 R1
22 7
3 R2
43
4 A
2 B 2 B 2 B
82 100
2 B
827
64
MANUAL VALVES
400HV Series
Features
Optimum valve for air cylinder operation switching. Sliding valve construction, and manually switched 4-port valve. Rotary type (swing lever) for reliable switching.
Symbol
Manual valve
Specifications
Model Item Media Valve function Operation type Effective area Port size Operating pressure range Proof pressure Operating temperature range Angle of lever operation Mounting direction Mass g [oz.] MPa {kgf/cm2} [psi.] MPa {kgf/cm2} [psi.] C [F] mm2 Rc1/4 400HV-02 400HV-03 Air 4-port, 3-position Direct acting 26 Rc3/8 00.97 {09.9} [0141] 1.47 {15.0} [213] 560 [41140] 90 Any 800 [28.2] Rc1/2 400HV-04
29.5
58 +0.2
+0.4
62 17.6
0.
P(IN) N
4-5.6 65.5
65.5 74
A OUT-1
115
Handling precautions
123
0.
N
37.5
57
/ / /
The air flow in switching is described by the figure which the arrow indicator on the selector handle shows. For 1 For 2
13
90
94
0.
828
Dimensions
(mm)
90
1 0.
17.6
FOOT VALVES
2-, 3-port
Inner Construction, Major Parts and Materials
Spring return with holding mechanism
Symbols
Spring return
2-port NC NO NC
3-port NO NC
2-port NO NC
3-port NO
Button Stem Diaphragm
Operating condition
(Normally closed) (Normally open) (Normally closed) (Normally open) (Normally closed) (Normally open) (Normally closed) (Normally open)
2 A
1 P 2 A
1 P 2 A
1 P 2 A 3 R
1 P
2 A
1 P 2 A
1 P 2 A
1 P 2 A 3 R
1 P 3 R
2 A
Valve body
3 R 1 P
2 A
3 R 1 P
250F-2
250F-2-11
250F
250F-11
250FL-2 250FL-2-11
250FL
250FL-11
Specifications
Operation type Item Port size Media Basic model Spring return 250F Rc1/4
Spring return with holding mechanism
250FL Rc1/4
Proof pressure MPa {kgf/cm2} [psi.] Operating temperature range C [F] (atmosphere and media) Effective area mm2 Flow coefficient Cv Valve stroke mm [in.] Lubrication Mass kg [lb.] Options . . . . . . .Order codes
Air 00.9 {09.2} [0131] 1.35 {13.8} [196] 560 [41140] 15 0.76 1.6 [0.063] Not required 1.0 [2.2] 1.6 [3.5]
2-port . . . . . . . . .-2 Normally open .-11
Dimensions
9.5
(mm)
1.2
9.5
155.5
9.5
2 A
104 92 73
3 R
1.2
9.5
Order Codes
Basic model Option Basic model Basic model Operation method Spring return 250F 250FL
Spring return with holding mechanism
44.5
Rubber pad
Flow Rate
Valve outlet pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Supply pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 400 800 1200 1600 2000 Flow rateR/min (ANR)
Note: In the cases of 250F and 250FL normally open, 1(P) port and 2(A) port are on the opposite side.
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 740R/min [26.1ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
0 [0]
0.2 [29]
0.4 [58]
0.6 [87]
0.8 [116]
Normally closed 5.9 [1.33] 9.8 [2.20] 13.7 [3.08] 18.6 [4.18] 25.5 [5.73] Normally open 5.9 [1.33] 8.8 [1.98] 11.8 [2.65] 14.7 [3.30] 18.6 [4.18]
829
30.5
FOOT VALVES
5-port
Inner Construction, Major Parts and Materials
Spring return with holding mechanism
Symbols
Spring return
Normal condition
Pedal Button Stem 2 B 5 R1 3 R2 4 A 1 P
4 A 2 B
5 R1 1 P 3 R2
4 A 2 B
5 R1 1 P 3 R2
250-4F 2503-4F
250-4FL 2503-4FL
Specifications
Valve body
Diaphragm
250-4FL Rc1/4
2503-4FL Rc3/8
Operating condition
Proof pressure Operating temperature range C [F] (atmosphere and media) Effective area mm2 Flow coefficient Cv Valve stroke mm [in.] Lubrication Mass kg [lb.]
Air 00.9 {09.2} [0131] 1.35 {13.8} [196] 560 [41140] 15 0.76 1.6 [0.063] Not required 1.6 [3.5] 1.7 [3.7] Parts Body Stem Diaphragm Cover, pedal
2 B 3 R2 1 P 5 R1 4 A
Order Codes
Basic model Basic model Specifications Rc 1/4 250-4F Spring return 250-4FL 2503-4F Examples: 250-4F 2503-4FL
Rc 1/4 Spring return with holding mechanism
Basic model
Dimensions
1.2 9.5 11
(mm)
159
9.5
3 R2 2 B
120
54 70
Flow Rate
11
Valve outlet pressure MPa
4 A 48 5 R1 55
178
1MPa = 145psi., 1R/min = 0.0353ft.3/min.
1 P
1.2
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Supply pressure MPa 0.8 0.7 0.6 0.4 0.3 0.2 0.1 0.5 0.9
4-9.8
111.3
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 740R/min [26.1ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
47.5
830
21
40
MECHANICAL VALVES
Ball-cam Type
Inner Construction, Major Parts and Materials
2-port
(Normally closed)
Symbols
3-port
(Normally open)
Normal condition
(Normally open)
Operating condition
NC
NO
(Normally closed)
NC
NO
2 A
1 P
2 A
1 P
2 A
1 P 3 R
2 A
1 P 3 R
125B-2-11
3 R
3 R
125B-11
1 P 1 P
Specifications
Item Port size Media
Operating pressure range
Basic model
125B Rc1/8
250B
2503B
0.11 [0.24]
2-port . . . . . . . . . .-2 Normally open . .-11 With lock nuts for panel mounting . .-22
9.3
M261.5 7.9
30 15
2-port . . . . . . . . . . . . .-2
42 46 24
7.5
3-Rc1 8 1 P 2 A
2 A
3 R
1 P
Basic model
Basic model Basic model Port size 125B Rc1/8 250B Rc1/4 2503B Rc3/8
Option
3 R
22
Flow Rate
125 series 2250 series 2503 series
Valve outlet pressure MPa Supply pressure MPa 0.8 0.9 0.7 0.6 0.5 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Supply pressure MPa 0.8 0.9 0.7 0.6 0.5 0.4 0.3 0.2 0.1 400 800 1200 1600 2000 Flow rateR/min (ANR)
32 45
32 45
1 P
2 A
40 57
Note: For the normally open type, the exhaust port 3(R) is on the opposite side.
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0
400
600
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 275R/min [9.71ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 740R/min [26.1ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
0.2 [29]
0.4 [58]
0.6 [87]
0.8 [116]
24.5 [5.51] 32.4 [7.28]1 40.2 [9.04]1 148.1 [10.81] 30.4 [6.83] 50.0 [11.24] 71.6 [16.10] 186.3 [19.40] 17.5 [3.93] 36.3 [8.16] 55.9 [12.57] 78.5 [17.65] 104.0 [23.38]
831
40 57
2 A
1 P
48 57.5
30.5
3 R
Order Codes
3-Rc14 3-Rc3 8
Proof pressure MPa {kgf/cm2} [psi.] Operating temperature range C [F] (atmosphere and media) Effective area mm2 Flow coefficient Cv Valve stroke mm [in.] Lubrication Mass kg [lb.]
Rc1/4 Rc3/8 Air 00.9 {09.2} [0131] 1.35 {13.8} [196] 560 [41140]
Dimensions
125B
(mm)
2250B 2503B
MECHANICAL VALVES
Roller-cam Type
Symbols
Roller-cam 2-port NC NO NC 3-port NO NC One way roller-cam 2-port NO NC 3-port NO
Normal condition
(Normally closed) (Normally open) (Normally closed) (Normally open) (Normally closed) (Normally open) (Normally closed) (Normally open)
2 A
1 P 2 A
1 P 2 A
1 P 2 A 3 R
1 P 2 A 3 R
1 P 2 A
1 P 2 A
1 P 2 A 3 R
1 P 3 R
Diaphragm
2 A 3 R 1 P
3 R 1 P
Specifications
Item
Operating condition
Basic model
125MC
125MOC
250C
2503C
2 A
3 R 1 P
2 A
3 R 1 P
Rc1/8
Proof pressure MPa {kgf/cm2} [psi.] Operating temperature range C [F] (atmosphere and media) Effective area mm2 Flow coefficient Cv Valve stroke mm [in.] Lubrication Mass kg [lb.] Options . . . . . . .Order codes
Rc1/4 Rc3/8 Air 00.9 {09.2} [0131] 1.35 {13.8} [196] 560 [41140]
Not required 0.15 [0.33] 0.30 [0.66] 0.35 [0.77] . . . . . . . . .-2 2-port Normally open .-11
Materials Aluminum alloy (anodized) Brass Synthetic rubber 125 series: Steel 250, 2503 series: Nylon
Dimensions
125MC
Roller diameter19 Roller width 7.8 Operating stroke, Approximately 4
(mm)
125MOC
40
Order Codes
Basic model Option Basic model Basic model Specifications 125MC Rc1/8
Roller-cam
45 5.0
90
Adjusting range of vertical direction of roller Nut for adjusting vertical direction of roller
64.4
Blank 2 11
Rc1/4 Rc3/8
30.5
stroke Approximately 3
Nut for adjusting horizontal direction of roller Adjusting range 360
30 19
85.5
3-Rc1/8
3 R
2.6
1 P
16
2 A
102
2503C
3 R
3 R
2 A 20 16
32
Flow Rate
32 45
45
1 P
2 A
125 series
Valve outlet pressure MPa 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Supply pressure MPa 0.8 0.7 0.6 0.9
1MPa = 145psi. 1R/min = 0.0353ft.3/min.
2 A
3 R
1 P
0.2 [29]
0.4 [58]
0.6 [87] 24.5 [5.51] 22.6 [5.08] 22.6 [5.08] 19.6 [4.41] 38.3 [8.61] 30.4 [6.83]
0.8 [116] 29.4 [6.61] 26.5 [5.96] 26.5 [5.96] 23.5 [5.28] 54.9 [12.34] 39.2 [8.81]
15.7 [3.53] 14.7 [3.30] 13.7 [3.08] 10.8 [2.43] 12.8 [2.88]
19.6 [4.41] 17.7 [3.98] 18.6 [4.18] 15.7 [3.53] 28.4 [6.38] 12.8 [2.88] 19.6 [4.41] 24.5 [5.51]
1 P
1.2
42 46
25.5 30.3
26
3 02'
3 R
2 A
40 57
40 57
5.0MAX. Stroke
How to read the graph When the supply 0.5 pressure is 0.5MPa 0.4 [73psi.] and the flow 0.3 rate is 275R/min 0.2 [9.71ft.3/min.] (ANR), 0.1 the valve outlet 600 200 400 pressure becomes Flow rateR/min (ANR) 0.4MPa [58psi.].
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 740R/min [26.1ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
2250C 2503C
91.3 65 30
Screw and lock nut for adjusting the height of the roller 9.4 Roller width
Note: Dimensions not specified are the same as for the 125MC.
Notes: 1. Dimensions in parentheses ( ) are for the 2503C. 2. For the normally open type, the exhaust port 3(R) is on the opposite side.
832
Option Code
18
MICRO VALVES
Specifications
Port size Media
Operating pressure range MPa {kgf/cm2} [psi.]
Application example
Continuous reciprocating operation of cylinder
Rc1/8 (1(P), 2(A)), 2 holes2 (3(R))
ON
Proof pressure MPa {kgf/cm2} [psi.] Operating temperature range 060 [32140] C [F] (atmosphere and media) Effective area mm2 1.8 Flow coefficient Cv 0.08 Valve stroke mm Approximately 1.5 (For details, see attached table.) Required (Turbine Oil Class 1ISO VG32is recommended) Lubrication Mass g [oz.] 90 [3.17] (KMP type), 100 [3.53] (KMC type), 130 [4.59] (KMR type) 2-port . . . . . . . . . . . . . . .-2 Options Normally open . . . . . . .-11 . . . . . . .Order codes With 3(R) port fitting . . .-60
2 A 1 P
Micro valves KMC-2
1 P
2 A 2 A 1 P 2 B 1 P 4 A Air-piloted valve
254-4AA Air pressure supply
Order Codes
KM Number of ports Operation type 3(R) port fitting Valve function Operation type Code Operation type P Pin plunger C Roller-cam One way O roller-cam Straight S plunger Roller R plunger 3(R) port fitting Code 3(R) port fitting Blank 60 With fitting
Circuit diagrams
Number of ports Code Number of ports Blank 3 2 2 Valve function Valve function Code Blank NC (normally closed) 11 NO (normally open)
Note : When using as a divider valve, specify as normally open, and with 3(R) port fitting (-11-60). Avoid using the normally closed type as a divider valve.
Flow Rate
Valve outlet pressure MPa
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0
Supply pressure MPa 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1MPa = 145psi. 1R/min = 0.0353ft.3/min. 0.9
2 A
1 P
2 A
1 P
3 R
3 R
How to read the graph When the supply pressure is 0.5MPa [73psi.] and the flow rate is 85R/min [3.0ft.3/min.] (ANR), the valve outlet pressure becomes 0.4MPa [58psi.].
2 A
1 P
3 R
833
Type
Shape
Model
Function
Total stroke
1.2 [0.047] 1.8 [0.071] 1.2 [0.047] 0.7 [0.028] 2.3 [0.091] 3.5 [0.138] 2.3 [0.091] 1.2 [0.047] 2.3 [0.091] 3.5 [0.138] 2.3 [0.091] 1.2 [0.047] 3.5 [0.138] 4.5 [0.177] 3.5 [0.138] 2.5 [0.098] 3.5 [0.138] 4.5 [0.177] 3.5 [0.138] 2.5 [0.098]
24.5 [5.51]
2.5 [0.098]
12.8 [2.88]
5.0 [0.197]
1 P
2 A
1 P 2 A
24.5 [5.51]
5.5 [0.217]
Notes: 1. Models in parentheses ( ) are made to order items. 2. The stroke until actuating means the movement which occurs from the free position until 1(P)2(A) is at the maximum flow rate, for normally closed type 2-, 3-port. And for the normally open type 2-port, it means the stroke which occurs until 1(P)2(A) is closed, while for the normally open type 3-port, it means the stroke which occurs until 2(A)3(R) is at the maximum flow rate.
834
KMS-2
Dimensions
KMP-2 KMP KMP-11
(mm)
2-Rc1/8
20
2-M30.5 Depth 4 Mounting thread for operator installation (It can also be used to mount pin plunger type.)
1 P 24 29 20 2 A 25
2 A
1 P
14
3 R
25.4 44
3 R port2
Roller-cam type
KMC-2 KMC KMC-11
10
12
2-Rc1/8
2-Rc1/8 55 50
1 P
43
38
1 P
1 P
14
3 R
17
25.4 44
10
4-M121 Thickness 2 14 (Width across flats) of approximately Plunger playincluded. 1 mm is not 16 19 16 29.5 2 1 2-Rc1/8
14
3 R
25.4 44
835
2 A
1 P
3 R 24 (Width across corners) 21 (Width across flats) Muffler (Model KM-1 type) In case it interferes with the mounting surface, a more compact muffler is available. 8.5
3 R
Roller-cam type
Stroke
Note:
48
Avoid over-tightening the R port fitting. For piping work, use a wrench to hold the fitting and prevent it from rotating.
Lubrication How to use as a divider valve For this micro valve, use Turbine Oil Class 1 (ISO VG32). Depending on the piping conditions (length, height) etc., oil may fail to reach the micro valve. When it occurs, consider supplying turbine oil into the piping at periodic intervals.
Let air in from the 2(A) port to flow toward the 1(P) port when OFF, and toward the 3(R) port when ON.
OFF ON
Dust protection
2 A Flow (when ON)
Notes: 1. Avoid using the normally closed type as a divider valve. 2. When using as a divider valve, the Order Code is -11-60. Example: Roller-cam type divider valve KMC-11-60
Use appropriate protection when using the micro valve in locations subject to heavy dust, powder, machining chips, etc.
1 P
Valve body
Stem
For 3-port normally closed For 3-port normally open For 2-port normally closed For 2-port normally open
Spring
Cover Fitting
836
1 P
2 A 2 A
837