Able for straight, curve, multitaper parabolic moulds High accuracy + - 0.01 mm measure reading on line on the Electronic Box display. Autocalibration Print data and graphic, data archive Foot Roll alignment check. And many other features Measure Head and ELECTR. BOX FUNCTIONS : - Electronic Box - Measure Head -Functions on display: - Movable size adapters -Autotest - Guide rod -Size selection
Able for straight, curve, multitaper parabolic moulds High accuracy + - 0.01 mm measure reading on line on the Electronic Box display. Autocalibration Print data and graphic, data archive Foot Roll alignment check. And many other features Measure Head and ELECTR. BOX FUNCTIONS : - Electronic Box - Measure Head -Functions on display: - Movable size adapters -Autotest - Guide rod -Size selection
Able for straight, curve, multitaper parabolic moulds High accuracy + - 0.01 mm measure reading on line on the Electronic Box display. Autocalibration Print data and graphic, data archive Foot Roll alignment check. And many other features Measure Head and ELECTR. BOX FUNCTIONS : - Electronic Box - Measure Head -Functions on display: - Movable size adapters -Autotest - Guide rod -Size selection
Tel +39-0565 223439 Fx +39-0565261028 e.Mail sider@infol.it www.sider.it CHARACTERISTICS
Versatile and easy to use Wide measure range by the same Measure Head. Mould measuring from 1 to 6 axis ( 3 each side ) Able for straight, curve, multitaper parabolic moulds High accuracy + - 0.01 mm Measure reading on line on the electronic box display Measuring until 10 mould and sending the data to the P.C. by radio or cable Elaboration of the measure data by P.C. and showing on graphic and table Comparison between measure executed in different time Ovality check for round mould Rhomboidity check for square mould Showing of the measure on 3D mould view. Autocalibration Print data and graphic, Data archive Foot Roll alignment check and many other features.
COMPONENTS MEASURE HEAD ELCTR. BOX NOTE BOOK PRINTER BATT CHARGER FOOT ROLL ALIGNM DIAGONAL DEVICE OPTIONS
SQUARE - RECT. FOOT ROLL ALIGN RHOMBOIDITY. ROUND MEASUREMENT RANGE ROUND SQUARE
SIZES MEASUREMENT FEATURES
Billett - 100 to 200 Accuracy . + - 0.01 mm
Bloom - 200 to 350 Resolution . + - 0.005 mm
Rectangular - As required Repeatability. + - 0.01 mm
Round - Size 1 120 to 200 Size 2 200 to 300 Size 3 300 to 400 or as required
MEASURE
MEASURE HEAD & ELECTR. BOX
FUNCTIONS :
- Electronic Box - Measure Head
-Functions on display: - Movable size adapters -Autotest - Guide rod -Size selection - Able for Foot roll alignment - Measure in Caliper Mode - Able for Diagonal device - Mould measure Mode - Measure axis indication - Measure values on line show. - Battery level indication - Data trans. by radio or wire - . and many other
ADAPTER DISPLAY MEASURE HEAD ELECTRONIC BOX DATA MANAGEMENT P.C. Software main functions-
-Drawing Editor Mould data for the measures comparison
-Calibration To check and set the Measure Head automatically by radio
Measure data elaboration-
- Table and graphic
-3D Representation
Left difference Center difference Graphic Right measure Center measure Left measure Measure point Right difference
-Mould info Synthetic mould data info: - Mould data - Taper values - RMSE values
-Measures comparison Comparison between measurer executed in different time
-Diagonal or Ovalisation Rhomboidity check for square mould Ovalisation check for round mould