You are on page 1of 1

CQI Improvement Case Study Tuned the CQI feedback Cycle(ms) from 1;3;3 to

1;4;5.
Tuned the cqiFeedbaLoadSwi and changed its value from 0 to 1.
After tuning both the parameters Improvement is visible in CQI and meeting the
Benchmark.

Note: If cqiFeedbaLoadSwi switch is turned on, than we can set the CQI feedback
cycle duration, According to this we can improve the CQI-KPI.
Pre Post KPIs :

You might also like