(D)Action11. Check Access Signaling 1. Start UE Trace by LMT 2. Check info hsdsch-physical-layer-category identifying the UE capacity in RRC_CONNECT_SETUP_CMP message, whether UE capability meets requirement. (CAT8 – 7.2Mbps; CAT10 – 14.4Mbps; CAT14 – 21Mbps) 3. Check info MaxBitRate in RANAP_RAB_ASSIGNMENT_REQ message (ExtendedMaxBitRate for HSPA+). If not meet requirement, need to check Laptop AT command Subscription information of USIM in HLR Max rate in SGSN and GGSN 4. If 64QAM is available, check info in RRC_RB_SETUP
(E)Action14. Check CPU Usage of Laptop Check CPU usage of laptop during data transmission. If high (>90%) the response message to RLC layer or TCP layer are transmitted in a low rate, which cause the window restriction.
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.