Professional Documents
Culture Documents
GENERAL PROBLEM
How to lessen time spent in creating a design?
How to develop designs that are more précised and of high quality?
How to achieve consistency during the engraving process?
SPECIFIC PROBLEMS
OBJECTIVES OF THE STUDY
Microcontroller-based Laser Engraver with Printed Circuit Board Designer
To design and develop a MCU-Based
Laser Engraving System with Printed
Circuit Board Designer.
GENERAL OBJECTIVE
To lessen time spent in creating a design.
To develop designs that are more précised and of high quality.
To achieve consistency during engraving process.
SPECIFIC OBJECTIVES
SCOPE AND LIMITATION
Microcontroller-based Laser Engraver with Printed Circuit Board Designer
Indicators
SCOPE
Engraver and Platform
SCOPE
Robotic Arm and Backup Battery
SCOPE
Sensor
SCOPE
Limited materials where the design can be engraved.
The engraving process is taking too long to finish.
The machine has manual operation.
Difficulty in changing the laser in case of emergency.
The sensor under the platform cannot detect if the material on the
platform is the appropriate one.
Once the engraving process is interrupted, the whole process will start
over again.
LIMITATIONS
METHODOLOGY
Microcontroller-based Laser Engraver with Printed Circuit Board Designer
PROTOTYPING METHOD DIAGRAM
1. Project Proposal
2. Data Gathering
3. Analyzing the Study
4. Identifying the hardware
5. Identifying the software
6. Creating the Diagram
7. Prototype Designing
STAGES
8. Canvassing
9. Purchasing the Materials
10. Designing the Circuit
11. Prototype Building
12. Checking the System
13. Testing the Prototype
14. Finalizing the Documentation
STAGES
HARDWARE AND SOFTWARE
Microcontroller-based Laser Engraver with Printed Circuit Board Designer
Stepper Motor, Stepper Motor Drivers, and Laser
Diode
HARDWARE
Microcontroller and Power Supply
HARDWARE
Rectifier Diode, Potentiometer, and Transistor
HARDWARE
Proximity Sensors and Regulator
HARDWARE
Proteus and Arduino IDE
SOFTWARE
Google Sketchup and AutoCAD
SOFTWARE
MS Office
SOFTWARE
Processing IDE
SOFTWARE
PROPOSED DESIGN OF THE DEVICE
Microcontroller-based Laser Engraver with Printed Circuit Board Designer
FRONT AND BACK VIEW
LEFT SIDE AND RIGHT SIDE VIEW
TOP VIEW
Developers:
Susmitha Janda
Armel Peralta
John Paolo Regudo
Clar Ivan Taytayon