Professional Documents
Culture Documents
Bridge and Civil Presentation
Bridge and Civil Presentation
SOLVE
SOLVE
ANALYZE
ANALYZE
the
theproblem
problem
THE
THE
PROBLEM
PROBLEM
DESIGN
DESIGNand
and
propose solutions
propose solutions
REFINE
REFINEtheir
their
proposals
proposals
TYPES OF CIVIL ENGINEERS
STRUCTURAL
TRANSPORTATION
GEOTECHNICAL
ENVIRONMENTAL
WATER RESOURCES
Who does this?
STRUCTURAL
ENGINEERS
Who does this?
TRANSPORTATION
ENGINEERS
Who does this?
ENVIRONMENTA
L
ENGINEERS
Who does this?
GEOTECHNICA
L
ENGINEERS
Who does this?
WATER RESOURCE
ENGINEERS
How to become an engineer!
Tips:
Take as much math and science as possible
Take ACT and SAT in your junior year
Consider Co-Op Schools
Look for scholarships
Scholarships!
KYTC
Applications accepted for UK, Western, Ky State, and UL
Summer Job and stipend while in school
Check out state website: personnel.ky.gov
College Tips:
Make connections
Use campus resources
Study Schedule
Don’t Overextend yourself
Meet the faculty
Get involved in activities
BRIDGES!!!!
Bridge Material
Timber
Concrete
Steel
EQUILIBRIUM
LOADS Summation of Forces
Σ F=0
FORCES Horizontal Direction
MOMENTS Σ Fh=0
Vertical Direction
TORSION Σ Fv=0
LOADS
Dead Loads
Live Loads
Wind Loads
Snow Loads
AXIAL LOADS
Compression
pushing or
shortening
Tension
pulling or
elongating
F
O
R
C
E
S
MOMENTS
Summation of Moments –
Σ M=0
Moment = Force * Distance
TORSION
Torsion is produced when a
beam is subjected to loads
which cause it to buckle and roll.
Diaphragms are inserted to
eliminate torsion.
T
O
R
S
I
O
N
Bridge Experiment
How it works:
Instead of pushing straight
down, the weight is carried
outward along the
curve of the arch to the supports at each end.
These supports, called abutments, carry the load
and keep the ends of the bridge from spreading
When supporting its own weight and the weight of
crossing traffic, every part of the arch is under
compression.
Beam Bridge
A beam or "girder" bridge is
the simplest & most inexpensive
bridge.
Rarely span more than 250 feet.
In its most basic form, a beam bridge consists of a
horizontal beam that is supported at each end by
piers. The weight of the beam pushes straight down
on the piers.
When a load pushes down on the beam, the beam's
top edge is pushed together (compression) while
the bottom edge is stretched (tension).
Beam Bridge
For medium length spans (those between 500 and 2,800 feet)
Require less cable
Are quickly built, resulting in a cost-effective bridge and is beautiful.
Cable-stayed bridges may look similar to suspensions bridges—both
have roadways that hang from cables and both have towers. But the
two bridges support the load of the roadway in very different ways.
The difference lies in how the cables are connected to the towers.
In suspension bridges, the cables ride freely across the towers, transmitting the load
to the anchorages at either end.
In cable-stayed bridges, the cables are attached to the towers, which alone bear the
load.
Parallel attachment pattern Radial attachment pattern
Truss Bridges
The truss is a simple skeletal structure.
individual members are only subject to tension and
compression forces and not bending forces.
Typical Span Lengths are 120 – 1500 feet
Pratt Truss
The Pratt truss design contains a downward pointing
V in the center with parallel diagonals on each side.
Except for those diagonal members near the center,
all the diagonal members are subject to tension
forces only while the shorter vertical members handle
the compressive forces. This allows for thinner
diagonal members resulting in a more economic
design.
Truss Bridges
Howe Truss
The Howe truss pattern features an upward pointing
V formed by the central diagonals with parallel
diagonals on either side. Unlike the Pratt pattern the
diagonals will be in compression when loaded
It is the opposite of the Pratt truss. The diagonal
members face in the opposite direction and handle
compressive forces. This makes it very uneconomic
design for steel bridges and is rarely used.
Build Your Bridge!
Warren Truss
Pratt Truss
Howe Truss
Ohio River Bridge Project
Ohio River Bridge Project
Ohio River Bridge Project