MACHINE By V Sri kumar (111616114111) V Venkatesh sairam(11616114111) ABSTRACT
• Fatigue failure is the cause due to cyclic
loading. These types of failure occurs mainly in systems operated by motor, Continuous force and moment but varying magnitude. The presentation shows that fatigue faliure of composite materials by giving flexural load . OBJECTIVE • The aim of this project work is to design a fatigue testing machine for flexural loading with simple operating technic and low cost of testing COMPONENTS Motor. Pulley. Shafts. Bearings. Base part. Holder. Connecting rod. Disc. T-nut and bolts. BASE: HOLDER: BEARING: MOTOR: PULLEY: T NUT AND BOLT: Working : Intially the specimen is used fixed with setup with the help of holder . The holder is used to silde on the base with the help of the T-nut and bolts. The holder movement is in the complete control of T-nut and blot. The motor is used to give the initial output of 1275 RPM. The first pulley reduce the rpm to 182 RPM. The second pulley again reduces the speed in 79.3 RPM. Therefore the final getting output is 79.3 RPM. The specimen is applied to the flexural load at a cycle of 79.3 RPM.The load is applied by the principle of connecting rod mechanism. The power to connecting rod is given from the disc. The connecting rod is connect the disc and the work piece. The rotating motion of the disc is converted into the reciprocating motion to the speccimen and flexural load is apllied to the specimen. 3D MODELING: CONCLUSION: • The setup is cheap, efficient and does not requires a lot of space like the conventional fatigue testing machines available in the market. Development of the component made up of the composite material. Hence the many composite materials samples can be tested for bending fatigue testing with the help of this setup. APPLICATION: • It is used to test the strength of various FRP laminates for marine use. • It is used test the performance of composites used in wind turbine and etc,. • These types of machine will helps the engineers to study the behaviour of the component made of composite materials ADVANTAGES: • Lost cost and more efficient. • It can be operated without skilled labour . • More comfortable one. • It required less space area. • Simple design. THANKYOU