Professional Documents
Culture Documents
Materi Kompleksometri 6B
Materi Kompleksometri 6B
lanjutan
Beberapa metode titrasi dengan EDTA
1. Titrasi langsung
- didasarkan pada indikator untuk ion logam tertentu
- penambahan ion logam lain
- menambah sedikit ion logam lain ke dalam EDTA terbentuk
kompleks – EDTA yg kurang stabil dari pada kompleks – analat
ex : Ca2+ + EBT kurang memuaskan,maka :
a. di+ MgCl2 ke larutan EDTA
b. awal titrasi :
Mg2+ + EDTA Mg – EDTA
Ca2+ + Mg – EDTA Ca – EDTA + Mg2+
Mg2+ + EBT Mg – EBT , merah
Mg – EBT + EDTA Mg – EDTA + EBT, biru
Ca sudah terkompleks semua
Erio - T indicator or Eriochrome Black-T indicator is used in this titration.
When it is chealted or acidifies, it produces a PINK RED solution. When it is
not chelated and under basic conditions it is BLUE.
The picture on the left shows the color of the indicator before titration. The three pictures to the right show
the end point in this titration. There is a 1 drop difference of 0.01 M EDTA between the first and second
pictures and between the second and third pictures. Two or three seconds were allowed for colors in the
second and third pictures to develop after adding the additional drop. In each case the solution was
thoroughly mixed. This color change from wine red to violet to blue is due to the compact nature of the
complex. The statement "the compact nature of the complex" means when the indicator is added to the
hard water, the indicator Erio-T forms a complex with the Ca +2 ions that is pink in color. As EDTA is added
to the solution, the EDTA forms a complex with the Ca +2 leaving the indicator Erio-T uncomplexed, which
is blue in color.
Mg2+ + EBT- Mg-EBT Komplex MgI-EBT lebih stabil
Ca2+ Ca2+
+ titrasi EDTA
K f K MY
MY ( n4)
M Y
n 4
Titrasi ion logam – EDTA
1. Titrasi 50 mL ion Ca2+ 0,1 M dengan EDTA 0,1 M. Kf = 5x1010
a. sebelum penambahan EDTA (kondisi awal)
pCa = -log Ca2+ = -log 0,1 = 1
b. ditambah 10 mL EDTA (sebelum TE)
Ca2+ + Y4- ↔ CaY2-
m 5 1
r 1 1 1
s 4 0 1 (Ca2+)= 4/60=0,067 pCa=1,17
c. ditambah 50 mL EDTA (saat TE)
Ca2+ + Y4- ↔ CaY2-
m 5 5 (CaY2-) = 5/100 = 0,05 M
r 5 5 5 (CaY 2 )
Kf
s 0 0 5 (Ca 2 )(Y 4 )
Saat setimbang (CaY 2 ) (CaY 2 )
Kf
(Ca2+) = (Y4-) (Ca )(Y ) (Ca 2 ) 2
2 4
0,05
(Ca 2 ) 2
5.1010
Ca2+ =1.10-6
pCa = 6
d. ditambah 60 mL EDTA (setelah TE)
Ca2+ + Y4- ↔ CaY2-
m 5 6 [CaY 2 ] 5 / 110
Kf 5.10 10
[Y 4 ]
4
CT
Dan
4
[Y ] Kf
MY ( n4)
4
CT
[Y4-] = α4 CT
M C
n
4 T
[CaY 2 ]
K ' f K f . 4 2
[Ca ].CT
50 x 0,005
CCaY 2 2,94.10 3
85
3,5 x0,01 50 x0,005
C EDTAsisa CT 1,18.10 3
85
[CaY 2 ]
K'F
[Ca 2 ]CT
3
2 ,94 .10
1,75 x1010
[Ca 2 ]1,18.10 3
[Ca 2 ] 1,42.10 10
pCa 9,85
• Titrasi EDTA sering di pakai untuk penentuan
kesadahan air penentuan ion Ca2+ dan Mg2+
yang sering ada secara bersamaan
• Pengaruh pH pada titrasi EDTA :
pH < TA kurang tajam [Y4-] berkurang
dengan penurunan pH
• pada pH yang sama (asam), maka Kf > akan
memberikan ketajaman TA
• pH minim untuk titrasi logam – EDTA adalah
0-1 (untuk Fe (III) & I (III)
Kurva titrasi Ca2+ - EDTA & Mg2+ - EDTA (HAL
247)
• Ex. :
Zn2+ pada pH ± 4
membentuk Zn(OH)2,
perlu di+ buffer NH3 –
NH4Cl pada konsentrasi
tinggi. Shg terbentuk
komplek Zn-NH3 (lihat Kf
Zn – EDTA & Zn – NH3
PENGARUH ZAT PENGOMPLEKS LAIN PADA
KURVA TITRASI EDTA
• Beberapa kation akan membentuk endapan hidrous
oksida pada pH yang diperlukan untuk titrasi dengan
EDTA.
• Maka diperlukan zat pengompleks lain agar dapat
membentuk kompleks dengan logam yang
bersangkutan.
• Zat pengompleks lain biasanya dalam bentuk buffer.
• Harga Kf untuk kedua bentuk kompleks harus
diperhatikan.
• Sehingga tetapan kondisionalnya harus dikalikan
dengan alpha-value dari logam (αM = [Mn+]/CM)
• CM = jumlah konsentrasi spesi yang mengandung ion logam eksklusif yang
bergabung dengan EDTA.
untuk larutan yang mengandung ion logam Zn dengan buffer amonia, maka :
CM = CZn= [Zn2+]+ [Zn(NH3)2+]+ [Zn(NH3)22+]+ [Zn(NH3)32+]+ [Zn(NH3)42+]
[ Zn( NH 3 ) 2 ]
K1
[ Zn 2 ][ NH 3 ] [Zn(NH3)2+]=k1.[Zn2+][NH3]
[ ZnY 2 ]
M . 4 .K ZnY K "ZnY
C M .CT
CM = 7,38.10-7M
[Zn2+]= (3,68.10-6)(7,38.10-7)=2,72.10-12 M
pZn = 11,57
4. Hitung pZn setelah penambahan 30 mL EDTA. (kondisi
ini adalah setelah titik ekivalen).
Zn2+ + Y4- → ZnY2-
(CM) (CT)
M: 0,25 0,30
R; 0,25 0,25 0,25
S: 0,00 0,05 0,25
[Zn2+]= (3,68.10-6)(8,16.10-10)=3,00.10-15 M
pZn = 14,52