Professional Documents
Culture Documents
3D (5 To 9)
3D (5 To 9)
3D 6
Tutorial 2
In this tutorial, you will create the model of the Motor Cover, as
shown in Figure A. The views and dimensions of this model are
shown in Figure B.
8. Save the file in \My Documents\CATIA\c07 folder and then close it.
3D 7
Exercise 1- RIB/SWEEP
Create the model of the Angle Flange, as shown in Figure A. Its views and dimensions of
the model are shown in Figure B. (Expected time: 45 min)
Figure A Model of the Helical Gear Figure B Views and dimensions for
for Tutorial 2 Tutorial 2
Figure B Views and dimensions for Tutorial 2
1. Create the base feature of the model, as shown in Figure C.
4. Draw the sketch of the second section of the gear on a plane that is at an offset
distance from the font plane of the base feature. This sketch is the 75% scaled
sketch of the first section and is rotated at an angle of 15-degree.
5. Draw the sketch of the third section of the gear on a plane that is at an offset
distance from the plane created earlier. This sketch is the 50% scaled sketch of
the section and is rotated at an angle of -15-degree, as shown in Figure F.
7. Save the file in \My Documents\CATIA\c08 folder and then close it.
3D 9
Tutorial 4
In this tutorial, you will create the model of the Upper Housing, as shown in Figure A.
Its views and dimensions of this model are shown in Figure B.
(Expected time: 1 hr)
7. Save the file in \My Documents\CATIA\c08 folder and then close it.