cylindrical roller bearings. Instead of an inner ring, they have a threaded solid stud (pin). These cam followers are also known as stud-type track rollers which are used in various other systems, for e.g Conveyers Types of Cam follower by SKF
Cylindrical roller bearing Needle roller bearing
Properties required in a bearing to be used in Cam Follower
Should accommodate high radial loads.
Should be able to accommodate axial loads. Long service life. Mounting on shafts should be easy and hassle free. Properties of SKF rolling cam follower
The thick-walled outer ring enables high radial
loads, while reducing distortion and bending stresses. The flange rings enable cam followers to accommodate axial loads that can occur because of skew or tilting. Long service life and they can also be re-lubricated. There are three basic designs manufactured by SKF in various sizes for different load magnitudes. Selection criterion for roller follower
• Performance and Operating conditions
• Bearing size • Lubrication • Operating temperature and speed • Sealing, mounting and dismounting Considering a 16mm roller follower by SKF
Performance and operating conditions : These bearings are
heat stabilized up to 140 degree C To attain full operational life, the conditions should not exceeded the limits provided by manufacturer A lithium based grease with mineral base oil having a viscosity between 100-200 mm2/s These bearings are available in various sizes Limiting speed : 6000 rpm Self-locking nuts and washers should be used in case of heavy vibrations Hexagonal nuts are provided for attachment
Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings
Turning and Boring
A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, etc.