This document outlines issues with two suppliers, Telydata and Elco, in meeting reporting and mapping requirements for an optical network deployment. It notes delays in daily reports, missing details like equipment locations and distances, issues defining drop cable placements, and inaccuracies in boundary mapping. The training schedule includes analyzing these issues, checklists, communications, and answering supplier questions to address non-compliance and improve network planning.
This document outlines issues with two suppliers, Telydata and Elco, in meeting reporting and mapping requirements for an optical network deployment. It notes delays in daily reports, missing details like equipment locations and distances, issues defining drop cable placements, and inaccuracies in boundary mapping. The training schedule includes analyzing these issues, checklists, communications, and answering supplier questions to address non-compliance and improve network planning.
This document outlines issues with two suppliers, Telydata and Elco, in meeting reporting and mapping requirements for an optical network deployment. It notes delays in daily reports, missing details like equipment locations and distances, issues defining drop cable placements, and inaccuracies in boundary mapping. The training schedule includes analyzing these issues, checklists, communications, and answering supplier questions to address non-compliance and improve network planning.
Currently issues for Telydata and Elco Missing the routing of OLT 1.Panarama still not put routing OLT till submited last version,even we remind 2 times in the email, why?--------Elco
Missing distance from pole to pole
2.Any pole to pole,it existed low tension or optic cable, need put distance ,even 2m!--------Telydata
Currently issues Define drop cable Which case should define drop cable----telydata and elco 1. When the low tension power line is not in front of the users to be serviced 2. When a wide street(if looks like very wide) just one pole will cover 2 sides,this case need take picture for showing to customer tempale as below
Currently issues The area no pole or duct can be use, means the last pole is more than 80m far from the user 1. check the user first 2. Check if has enough space to build new pole,if no,take the pictures and mark the boundary in the good map to send Huawei check first in the daily progress report 3. If Proposal to build new pole, need take picture to show and where will be put new pole.
Currently issues The area no pole or duct can be use, means the last pole is more than 80m far from the user 1. check the user first 2. Check if has enough space to build new pole,if no,take the pictures and mark the boundary in the good map to send Huawei check first in the daily progress report 3. If Proposal to build new pole, need take picture to show and where will be put new pole----telydata ,elco
Currently issues Adjust boundary 1. First make boundary as google earth layer(Kmz file)-Elco never put boundary,we made each time for you,please attention. 2. In the boundary street if there is just one row poles, need cover both 2 sides user,if have 2 row,no need 3. If the new polygon is near the other polygon, check if some user is repeat, need deltel the repeat part Toachi,calazacon,los rosales,----------telydata