Professional Documents
Culture Documents
AutoCAD Revision
AutoCAD Revision
AUTOCAD
THE ENGINEER’S FRIEND
2
1) Line.
COMMANDS IN DRAW TOOLBAR
2) Construction Line.
3) Polyline.
4) Rectangle.
5) Polygon.
6) Circle.
7) Arc.
8) Spline.
9) Revcloud.
10) Ellipse.
11) Hatch.
12) Point.
Line
3
There are almost 9 methods for making an arc. But we will learn
only the important ones.
1)Three points arc:
In this method an arc is made by providing three points
( start, end, center).
2) Start, Center and Angle:
In this method an arc is made by providing two points( start, center)
and included angle.
Spline
10
Spline is a combination of
many arcs.
Activated by command
“Spline”.
Spline
Revcloud
11
Revcloud is basically a
command in draw toolbar which
is used to make cloudlike
structures. Revcloud
It is activated by command
El
lip
”ellipse”.
se
Its size can be changed by
changing size of axes of What happens if size of
rotation. both axes of rotation
becomes equal??
Hatch
13
model.
For example:
In construction of house model, hatch with brick design can
be used.
Point
14
15
1)Erase 2)Copy
3)Mirror. 4)Offset.
5)Array. 6)Move.
7)Rotate. 8)Scale.
9)Stretch. 10)Trim.
11)Break. 12)Chamfer.
13)Fillet. 14)Explode.
16
Erase:
Used for removing any mistake.
Activated by “Erase”.
Mirror:
Produces an identical copy of object but original
object is removed or not according to user’s desire.
Activated by command “mirror” or ”mi”.
Offset:
Produces copy of object in number as desired by user
at equal distance.
Activated by command ”offset”.
18
Array:
Produces copies of object in as many number as
entered by user.
Activated by command “Array”.
Rotate:
Rotates or spins any object about a specified point.
Activated by “rotate” or ”ro”.
Scale:
Compresses or expands size of object.
It is activated by command “Scale”.
20
Stretch:
Stretches and meet two broken parts of an already
developed object.
Activated by using command “stretch”.
Trim:
Cuts off any extra lines extending out of boundary of
already developed object.
Activated by command “trim” or ”t”.
21
Break:
Breaks a line between any two points in object.
Activated by command “break”.
Chamfer:
Makes sharp corners in any object.
Activated by command “chamfer”.
22
Fillet:
Produces smooth corner in any image.
Activated by command “fillet” or “f”.
Explode:
Activated by command “Explode” or “xp”.
Divides a single object into a large number of lines .
1)3D orbit:
“The type of orbit which is controlled by us all time and as
we leave mouse, object stops spinning.”
Zoom: Pan:
Activated by command Activated by command
“zoom”. ”pan”.
working
of object.
Parameters:
1)Extrude Faces: Used to extrude faces of a 3D solid.
2)Taper Faces: Used to produce tapered faces in object.
3)Color Faces: Used to color individual faces of 3D solid.
4)Union: It is usually performed at the end . It is used to combine
different components of an image.
5)Intersection: It is used to get the component of image which is
common between two parts.
Facetres
38
1)Making a base
2) Forming Stand
3) Formation Of Circles On Main Base Rectangle
4) Formation Of A Hollow Circle At Top
5) Formation Of A Triangle Between Two Lower
Holes
6) Modifying Or Giving Some Life/Color To Design
Making a base
42
44
Formation Of Circles On Main Base Rectangle
45
46
Formation Of A Hollow Circle At Top
47
48
Formation Of A Triangle Between Two Lower
Holes
49
use extrude faces from solid editing. We also perform union and
facetres at this stage.
Figures Showing Formation Of A
Triangle Between Two Lower Holes
50
Modifying Or Giving Some Life/Color To Design
51
solid editing.
Any
Questions??
Thank You!!