Introduction • Li-Fi basically known as light fedility • Li-Fi is a new way of wireless communication that uses LED lights to transmit data wirelessly. • Light is used instead of radio waves to transmit information
Dept. of Electronics and Communication
3 Engage. Motivation
Dept. of Electronics and Communication
4 Engg. PRESENT SCENEARIO • Radio spectrum is congested but the demand for the wireless data double each year. Everything, it seems want to use wireless data but the capacity is drying up. • So what can carry this excess demand in the feature.
Dept. Of Electronics and Communication
DATE 5 Engg. Objective • The prime objective of the project is to create an application that transmits data be it text, using Li-Fi technology for coping with the limited bandwidth problem we face in RF (Radio frequency) signals. • For better, efficient, secure and a faster connection Li-Fi is used.
Dept. of Electronics and Communication
6 Engg. Methodology • This circuit uses arduino as its controlling part for the whole operation , in this project we used two controller based on arduino. • Transmitter section has one arduino controller it convert input text data into digital 0s and 1s • Given the input data using keypad. • This data is given to the input of analog pins of arduino and it convert data into light which drives the LED . Dept. of Electronics and Communication 7 Engg. Methodology • Light flows on the LDR and its receives the data and compare the input data using LM358 comparator • The receiver section has one arduino its receives the data through LDR and comparator it convert light into which data is given in transmitter and display the data using LCD display
Dept. Of Electronics and Communication
DATE 8 Engg. Block diagram
Dept. Of Electronics and Communication
DATE 9 Engg. Specifications • Arduino Uno • 4x4 keypad • LCD display • LED –Light source • LDR • Bread board • LM358 comparator
Dept. of Electronics and Communication Engg. 10
Conclusion • Finally our concept about the project is successfully done • Concept of LI-FI promises to solve issues such as, shortage of radio-frequency bandwidth. • Technology, we can migrate to greener, cleaner, safer communication networks. • If this technology can be put into practical use every bulb can be used something like a WI-FI hotspot to transmit wireless data Dept. of Electronics and Communication 11 Engg. References • http://ieeexplore.ieee.org/document/8070779 • http://transmitter.ieee.org/marketproject/63c1c • http://circuitstoday.org/automatic-gate-control