Professional Documents
Culture Documents
Tracing
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
5-4
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
5-6 HEADING SELECT / GO-AROUND DIAGRAM
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
5-10 NAVIGATION / VOR APPROACH DIAGRAM
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
5-18
LOCALIZER AND BACK COURSE DIAGRAM
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
5-24
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
5-30
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
Review
1. Which switch has an autopilot/ flight director function?
Go Around switch
_________________________________
2. Altitude and airspeed information for use by the flight control
computer is produced by the:
______________________________
AZ-649 air data sensor
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
Review
6. The pitch command bar will be in view (not biased) if:
_________________________________
VG is valid, FD is valid and not in standby.
______________________________
Horizontal Situation Indicator
8. Roll Bar Bias (RBB) will occur if the flight director is in standby, or:
______________________________
Any of the above
9. If flying in the ILS mode, what device will trip and capture the
glideslope?
______________________________
Vertical beam sensor
10. In the FZ-706 Flight Control Computer, what function is the term
"outer loop modes" is generally associated with?
Flight director operation
_________________________________
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only
END OF CHAPTER
412EP0-ASM-ENG-20080731-0-00 © 2008 Bell Helicopter Textron Inc. For Training Purposes Only