You are on page 1of 6

Supervision of UE in RRC

Connected State
Algorithm:
1. UE detects a certain number (N310) of out-of-sync indications  timer
T310 is started.

First Phase Second Phase

Radio no recovery during no recovery during


Normal operation problem Return to idle
T310 T311
detection

RRC_Connected RRC_IDLE

(N310) of out-of-sync indications


Separated every 10 ms
radio link failure

© Ericsson AB 2016 | Radio Connection Supervision | LZU1082162 R1A | Figure 3-1


Supervision of UE in RRC
Connected State
Algorithm:
2. no recovery (N311 in-sync indications) is detected before T310
expires?  RRC Connection Reestablishment is triggered and timer
T311 is started.

First Phase Second Phase

Radio no recovery during no recovery during


Normal operation problem Return to idle
T310 T311
detection

RRC_Connected RRC_IDLE

(N310) of out-of-sync indications


Separated every 10 ms
radio link failure
© Ericsson AB 2016 | Radio Connection Supervision | LZU1082162 R1A | Figure 3-2
Supervision of UE in RRC
Connected State
Algorithm:
3. If the UE has not found a cell (with a new cell reselection) to send the
RRC Connection Reestablishment to, before T311 expires, it releases
the resources and goes to RRC_IDLE.

First Phase Second Phase

Radio no recovery during no recovery during


Normal operation problem Return to idle
T310 T311
detection

RRC_Connected RRC_IDLE

(N310) of out-of-sync indications


Separated every 10 ms
radio link failure

© Ericsson AB 2016 | Radio Connection Supervision | LZU1082162 R1A | Figure 3-3


Supervision of UE in RRC
Connected State
Algorithm:
4. If RBS receives the RRC Connection Reestablishment Request
message and if the feature RRC Connection re-establishment is not
active, it will send RRC Connection Reestablishment Reject to the UE
which will go to RRC_IDLE .

First Phase Second Phase

Radio no recovery during no recovery during


Normal operation problem Return to idle
T310 T311
detection

RRC_Connected RRC_IDLE

(N310) of out-of-sync indications


Separated every 10 ms
radio link failure

© Ericsson AB 2016 | Radio Connection Supervision | LZU1082162 R1A | Figure 3-4


Supervision of UE in RRC
Connected State
Algorithm:
5. If there is a UE context in the cell which the UE triggered RRC
Connection Reestablishment to, the RBS will trigger a release of that
UE context  No handover is allowed

First Phase Second Phase

Radio no recovery during no recovery during


Normal operation problem Return to idle
T310 T311
detection

RRC_Connected RRC_IDLE

(N310) of out-of-sync indications


Separated every 10 ms
radio link failure

© Ericsson AB 2016 | Radio Connection Supervision | LZU1082162 R1A | Figure 3-5


Uplink RLC Failure
‘tPollRetransmitUl’ = 80 msec (default)

Transmit PDU with polling bit


Wait for Status
Indication
Retransmit PDU with polling bit
‘ulMaxRetxThreshold’ = 8 (default)

Retransmission # n Retransmit PDU with polling bit

n = maximum allowed number of retransmissions


=> UE will attempt RRC Re-establishment

© Ericsson AB 2016 | Radio Connection Supervision | LZU1082162 R1A | Figure 3-6

You might also like