Workers unload wood logs from vehicles and load them onto tricycles or roll them to the machines. The logs are loaded onto a rail car where their length and width are measured. Workers use machines to slice the logs into pieces of specific sizes based on measurements. The sliced wood pieces are pushed to the side while the rail car is pulled back for additional slicing. Blades are sharpened using hand tools and grinders to ensure clean cuts. The wood pieces are arranged and loaded onto vehicles to be transported for use in making boxes, fuel for roasting factories, cooking food, and by carpenters.
Workers unload wood logs from vehicles and load them onto tricycles or roll them to the machines. The logs are loaded onto a rail car where their length and width are measured. Workers use machines to slice the logs into pieces of specific sizes based on measurements. The sliced wood pieces are pushed to the side while the rail car is pulled back for additional slicing. Blades are sharpened using hand tools and grinders to ensure clean cuts. The wood pieces are arranged and loaded onto vehicles to be transported for use in making boxes, fuel for roasting factories, cooking food, and by carpenters.
Workers unload wood logs from vehicles and load them onto tricycles or roll them to the machines. The logs are loaded onto a rail car where their length and width are measured. Workers use machines to slice the logs into pieces of specific sizes based on measurements. The sliced wood pieces are pushed to the side while the rail car is pulled back for additional slicing. Blades are sharpened using hand tools and grinders to ensure clean cuts. The wood pieces are arranged and loaded onto vehicles to be transported for use in making boxes, fuel for roasting factories, cooking food, and by carpenters.
LA20MCE013 ANKITA THE ARRIVAL : Wood logs arrive the mill in vehicles, basically in tractors. Workers load off the vehicle using wooden branches and other tools. LET'S LOAD : Mill workers taking out the stored wood logs to load on tricycle and to take it to the machine. TIME TO POWER : DUM LAGA KE HAISA ! They either load it on a tricycle or roll down the logs with force to make it reach its destination. LOADING : Once the wood log reaches, the machine staffs load it on a pulling rail car (of horizontal trolley machine) with the help of wooden tools. LENGTH BREADTH: After the proper fitting of wood log,the next step is to measure it cross sectionally {left and in length {right} . RATIO N PROPORTION : On horizontal trolley machine, staff fixes measurement and size ratio for the wood to be sliced. PULL: The rail car (right) is being apulled by another worker using log puller machine. PUSH : The sliced woods are kept aside (left) and again the rail is pushed back for next slicing (right). SHARP: Another important part of the saw mill is the Vertical Bandsaw Machine. 'Mistry' or the machine staff ,sharping the blades,using hand tool (left) and using grinder machine (right). WE ARE READY TO CUT : Another worker , tighting the saw blades for proper cutting. FINAL CHOPPING: On this machine ,woods to be cut goes through same process of measurement but they are pulled by hands instead of machines. ARRANGEMENTS: The final product(left) that is the required sizes of woods, being arranged by another worker(left) . TAKE OFF ...BYE: The chopped wood, loaded on vehicle is ready to reach the places of its use. Making of wooden electric Cereal roasting factories Locals around the machine Carpenter shop totally board boxes. buy wood powder for their buy woods to cook food . depends on these saw mill. machines.
USES: Some ways in which these machines come to use in daily life and livelihood. THANK YOU!