Professional Documents
Culture Documents
Havoline XLC
BP Terrac Super TS
• Replacement interval for the new ECOWHITE hydraulic oil filter element is
1000 hours without breaker use.
• Set the oil level in the hydraulic oil tank to the lowest possible level by
extracting boom, arm and bucket cylinder.
• Allow the element to drain in the tank before replacement.
• Replacement interval for hydraulic oil is 5000 hours without breaker use.
• Set the oil level in the hydraulic oil tank to the highest possible level by
retracting boom, arm and bucket cylinder.
• Now drain the oil from the tank.
• Allow the element to drain in the tank before replacement.
• Add new hydraulic oil.
Hydraulic oil
drain plug
Ø 56
130
The fuel filler port and the strainer are
220
improved so that a large fuel gun can be used Ø 48
and that stable fuel feed is possible without
fuel spilling
New swivel joint design incorporates electrical connections for the attachment solenoids
and face seal O ring connections for better sealing.
The transmission can be protected with a guard. This transmission protector is available
as option.
Steel pins
Steel bushings
Chrome pins
Bronze bushings
If the pump and engine controller fails, it is possible to set the fuel linkage with a stopper
bolt to high idle.
Stopper bolt
Bracket
Linkage
Swing gear
Inner seal
Sealing compound
Grease bath
There is an engine oil collector mounted to the end of the engine breather hose.
Excessive engine oil must be drained from time to time at the bottom of this collector.