Professional Documents
Culture Documents
Vinayak
12/2/2021
1. Open latest version of ANSA tool & Import the geometry 2. Measure the CAD dimensions. Need to convert from Meter to MM.
(Deafult ANSA measurement is in MM)
2
5. Need to clear unchecked faces which is 6. Insert hot points on edges or use project 7. Delete very small feature lines which
geometry error. Double click on unchecked cut option to clear overlapping edges. creates quality issue in future.
message to show errors.
3
10. Need to clear single edges
after clearing unchecked faces. 11. Delete duplicate geometry & lock Fr case only for the clean up.
Geometry has thickness need to remove & make air tight model.
12. Release cons of the outer geometry & holes to separate inner geometry. 13. Clean up the other side of the fr case & combine both
Using PID region delete outer geometry at one click. (This method will save time) geometry using topo or paste option
4
14. Follow same method with scroll (Release cons Delete outer thickness with one click)
15. Use feature & loop option 16. Project cons to the surface to connect 17. This will form triple coons at
while selecting the outer edges upper & lower evapcase. the connecting point. Later delete
which selects edges quickly. Fill the small gap b/w evapcase. surfaces which are not required.