Professional Documents
Culture Documents
WiMAX Terminals
2 2
www.huawei.com Huawei confidential, 2007-10
Overview of Genex Probe
The Genex Probe and Genex Assistant for drive tests are part of the Genex series. The Genex
series can work with many systems, such as GSM, WCDMA, EDGE, CDMA, and WiMAX. The
modules for the WCDMA and GSM systems have found wide commercial use.
The Genex series is now developed to V200R002SPC140 to serve the WiMAX system. And it
can support Sequans, GCT, Runcom, Beceem chips now.
The Genex series uses the following tools to provide a platform for the network planning and
optimization software of Huawei:
Drive test tools
Genex Probe
Genex Assistant
3 3
www.huawei.com Huawei confidential, 2007-10
Operation flow
4 4
www.huawei.com Huawei confidential, 2007-10
Contents
WiMAX Terminals
5 5
www.huawei.com Huawei confidential, 2007-10
Genex Probe Software Installation
Installation Environment
Windows XP (English or Chinese)
Memory: 1 GB
Installation Procedures
Install the Genex Shared.
Install the Genex Probe & Assistant.
Install the drivers for terminals.
Apply or update for the license and hard dog.
6 6
www.huawei.com Huawei confidential, 2007-10
Contents
WiMAX Terminals
7 7
www.huawei.com Huawei confidential, 2007-10
Connect Devices
1. Configure MS and GPS in “Device Configuration”.
8 8
www.huawei.com Huawei confidential, 2007-10
(1) Add MS:
Click “+” The Device Config dialog box is displayed.
Select MS from the Type list, and then choose the Dongle type then go to next step
9 9
www.huawei.com Huawei confidential, 2007-10
The network information of the terminal is displayed, such as IP address.
Click OK.The MS is successfully added.
Some dongle need to Fulfill the Agent IP address (based on the Dongle type)
10 10
www.huawei.com Huawei confidential, 2007-10
(2) Add the GPS:
Click +.
The Device Config dialog box is displayed.
Select GPS from the Type list, and then click Next.
11 11
www.huawei.com Huawei confidential, 2007-10
Select 4800 from the Baudrate list and COM1 from the Com Port list, and then click
OK.
The GPS is successfully added.
12 12
www.huawei.com Huawei confidential, 2007-10
The Hardware Config window displays the successfully added MS and GPS.
13 13
www.huawei.com Huawei confidential, 2007-10
Click Auto Connect.
14 14
www.huawei.com Huawei confidential, 2007-10
The connection succeeds.
15 15
www.huawei.com Huawei confidential, 2007-10
Contents
WiMAX Terminals
16 16
www.huawei.com Huawei confidential, 2007-10
Input the Engineering Parameter
Engineering Parameter (EP)
17 17
www.huawei.com Huawei confidential, 2007-10
Input the EP file
Open the Configuration, then choose “ Select “import file” and then
Engineering parameter management “ input the EP file (excel file)
18 18
www.huawei.com Huawei confidential, 2007-10
Completed the Engineering Parameter
19 19
www.huawei.com Huawei confidential, 2007-10
Apply the Engineering Parameter
Apply the EP
20 20
www.huawei.com Huawei confidential, 2007-10
Opening a Map and Layer
21 21
www.huawei.com Huawei confidential, 2007-10
Adding map : Click Open Geoset File.
The Open MapInfo File dialog box is displayed.
22 22
www.huawei.com Huawei confidential, 2007-10
Map displayed.
23 23
www.huawei.com Huawei confidential, 2007-10
LTE Signal Indicator and Information
Choose “View” click “LTE” and then choose the information that we needed or
any other information that we want to display
24 24
www.huawei.com Huawei confidential, 2007-10
LTE Signal Indicator and Information
Parameter that need to display : Radio Parameter, Antenna measurement,
Serving and NBR cell, and Outdoor map
25 25
www.huawei.com Huawei confidential, 2007-10
Test Plan Configuration
Test Plan Configuration
26 26
www.huawei.com Huawei confidential, 2007-10
Test Plan Configuration
Test Plan Configuration
Set different parameters according to the different test. 4. Set test
parameters
1. Add test
5. Test
statistic
2. Choose
equipment
3. Test
statue
27 27
www.huawei.com Huawei confidential, 2007-10
Test Plan Configuration
Test Plan Configuration
Set different parameters according to the different test.
4. Set test
parameters
5. Test
1. Add test statistic
2. Choose
equipment
3. Test
statue
28 28
www.huawei.com Huawei confidential, 2007-10
Service quality
PING Service Quality Evaluation
In PING Service Quality Evaluation window we can check some informations such
as PING time,KPI.
29 29
www.huawei.com Huawei confidential, 2007-10
Log file playing
30 30
www.huawei.com Huawei confidential, 2007-10
Probe interface
Test observing
window
Control and
parameters
GCT/
Sequans/
Runcom
parameters
MAC
Messages &
Event
Service
statistics
Scanner
31 31
www.huawei.com Huawei confidential, 2007-10
Log file playing additional
32 32
www.huawei.com Huawei confidential, 2007-10
Log file playing
33 33
www.huawei.com Huawei confidential, 2007-10
Contents
34 34
www.huawei.com Huawei confidential, 2007-10
Thank You !
35 35
www.huawei.com Huawei confidential, 2007-10