Professional Documents
Culture Documents
Electrolysis:
Thebreakdownofan ioniccompound,moltenor in aqueous solution,bythe passageof
electricity
Electrolyte: A liquid that conducts electricity as a result of the presence of positive and
negative ions.
Electrode: A conductor that emits or collects electrons in a cell. Usually an inert material such
as platinum or graphite are used. There are two electrodes Cathode and Anode
At the anode (+) negative ions discharge by losing electrons to form neutral species. The
process is oxidation.
At the cathode (-) positive ions discharge by gaining electrons to form neutral species.
Cathode reactions are reduction reactions.
Electrolysis of Molten Lead(II) bromide (PbBr2):
The electrolysis of molten salt results in two ions positive ion and negative ion.
positive ion move towards the cathode (-) while negative ion move towards the anode (+)
Molten lead bromide is electrolyzed to form lead at the cathode and bromine at the anode:
Electrolysis of Solution:
In electrolysis of solution more than one type of cation or anion are produced but only one
cation and one anion are preferentially discharged. This is known as the selective
discharge of ions.
The ions discharged and hence the products formed depend on two factors:
1. The position of the metal (producing the cation) in the reactivity series.
2. The concentration of the anion in the electrolyte.
Reactivity series
Selective discharge of cations during electrolysis:
The cations of an element lower in the reactivity series are discharged at the cathode in
preference to cations above it in reactivity series in the solution.
That anion will discharged at the anode which is present in greater concentration compare
to other anion in the solution. If Sulphate (SO42-) and nitrate (NO3-) ions are present in
solution these will remain in the solution and are not discharged during electrolysis.
Electrolysis of saturated Sodium Chloride Solution:
When concentrated aqueous solution of NaCl is added to the cell. NaCl splits into Na+ and Cl-.
And water splits into H+ (aq) and OH- (aq) so an aqueous solution of sodium chloride contains
four different types of ions. They are