You are on page 1of 11

GENIUS III CONTROLLER

Genius III – Controller Outlook


DISPLAY OPTIONS

CGD1 CGD2 CGD3

Display Options
CGD1 DISPLAY
BAGIAN KOMPONEN DARI AC

1. Evaporator
2. EEV (electrik expansi valve)
3. ELectrik Panel
4. Compressor
5. Humidifier
6. Genius III Controller
Main Menu

Level 1
• User
• Password protected

Level 2 Level 3
• Distributor / Engineer • Factory
• Password protected • Password protected
Level 1 Menu

• Set point
• Time control (2 time zones)*
• Set clock
• Select language
• Software Version
• Set new password
• Remote On Off
• Rotation configuration
• Unit On/Off Password**
Level 2 Menu
• EEV Control • BMS Setup
• Cool Control • Calibration
• Heat Control • Alarm Setup
• Dehum. Control • Delay Time
• Humidity Control • Reset Alarm History
• Alarm Band • Forced Outputs
• Control Type (P, I, D) • Run Hours
• Unit Configuration • Reset Run Hours
• Water Temperature • Set New Password
• FSC • Unit Expired
• Dehum. On/Off • Health Check
• Aux. Alarm Text
Level 3 Menu
• Sensor Type
• Cooling Setup
• (CW, DX Air-Cooled,
DX Water-Cooled, Dualcool)
• Heating Setup
• Humidifier Setup
• Load Default
• Analogue Output
• EEV Setup
Alarms
• Comp. 1 High Pressure
• Comp. 2 High Pressure
• Comp. 1 Low Pressure
• Comp. 2 Low Pressure
• High Temperature
• High Humidity
• Low Temperature
• Low Humidity
• Filter Blocked
• Klixon Tripped
• Air Flow Failed
• Water On Floor
• Drip Tray Full
• LAN Disconnected

You might also like