You are on page 1of 18

NOISE REMOVAL FROM SPEECH

THROUGH FILTERING

PRESENTED BY:
ABDULLA AL JUBAYR- 021 171 028
FAHIMUR RAHMAN- 021 171 064
OBJECTIVE
• Recording a voice message signal
• Listening the original signal.
• Adding and listening interference and Gaussian noise with original signal
.
• Designing filter to remove noise.
• Verifying the reconstructed signal.
• Comparing the original and reconstructed signal.
BLOCK DIAGRAM
FUNCTIONS AND TOOLS USED IN MATLAB

• fft (Fast Fourier Transform)


• Filter
• Fdatool
• Awgn
WORKING PROCEDURE
PLOTTING OF ORIGINAL SIGNAL
FFT OF THE ORIGINAL SIGNAL
NOISE SPECIFICATION
Interference Noise :
• Sinusoidal
• Frequency- 2500 Hz
Gaussian Noise:
• snr-20 dB
• Awgn function used
EFFECT OF NOISE ADDING
FILTER DESIGNING SPECIFICATION
Filter type: Low Pass Filter
 Sampling Frequency: 48 KHz
Order: 98
Passband Frequency: 545
Stopband Frequency: 550
Passband Weight: 10
Stopband Weight:1
Density: 20
FDATOOL
MAGNITUDE AND PHASE RESPONSE
FREQUENCY DOMAIN OF RECONSTRUCTED SIGNAL
PLOTTING INPUT ,NOISY ,OUTPUT
SIGNALS
COMPARING ORIGINAL AND
RECONSTRUCTED SIGNAL

You might also like