Professional Documents
Culture Documents
based GPS life vest with GSM notification for passengers on the Alabat-Gumaca ferry
respondent due to the major problem of an unexpected water accident at the time and the
The materials needed for the study are the following: (1) the Arduino IDE, (2) a GPS module,
(3) GSM Modules, (4) case housing, (5) waterproof cover and (6) a computer/desktop or laptop
for programming. The proposed system employs Internet of Things components to track and
monitor small boats from Alabat to Gumaca port. The device helps people stay afloat and
prevents drowning. It is required that cruise ships carry enough life jackets for all passengers in
case of an emergency. Lastly, it can send the information to the local rescue team if passenger/s
technical techniques in programming the device. However, the study is limited only to track
the passenger. Nevertheless, the study focuses on developing a device that can give the
passengers an assurance of their safety while travelling. The study was conducted during
of related literature and studies presented
INPUT PROCESS OUTPUT
• Vest
• Button
• Waterproof Case
Figure 9 shows the input-process-output model used in this study by the researchers to construct the developed device that is
incorporated into an Arduino-based GPS life vest with GSM notification. In the input, the specifications necessary to build the device
were specified in the hardware, software, and related studies required to run the program.
It began with the gathering of information from articles and websites where information gathered was all related to support the
problem of the study. Hardware and software were also considered. The researchers used the GPS and GSM modules to track their
location and send a notification, as well as the Arduino Micro, a micro-controller board having digital and analog input and output
ports, and Arduino IDE, a text editor for writing code. After all of the process's needs, such as content, had been met, the researchers
monitors the system's growth and development, and the program's enhancement was initiated. At the end of the procedure, all
Finally, the output covered the completion and productivity of the application entitled Arduino-Based GPS Life Vest For Alabat-
Gumaca Ferry Boat Passengers With GSM Notification. The system was evaluated using ISO 25010 standards, measuring its
1 4 4 4 4 3
2 4 4 4 4 4
3 4 4 4 4 4
4 4 4 4 4 4
5 4 4 4 4 4
6 4 4 4 4 3
7 4 4 4 4 3
8 4 4 4 4 3
9 4 4 4 4 3
10 4 4 4 4 4
11 4 4 3 3 2
12 3 4 3 3 3
13 4 3 3 4 3
14 3 4 4 2 3
15 3 4 3 4 4
16 4 3 3 4 3
17 3 4 4 3 4
18 4 3 2 3 3
19 4 3 2 3 3
20 3 4 4 3 3
Total 75 76 71 72 66
3.75 3.8 3.55 3.6 3.3
3.6
Results of Cost Effectiveness
Respondents Q1 Q2 Q3 Q4 Q5
1 3 3 3 3 4
2 3 3 4 4 4
3 4 4 4 4 4
4 4 4 4 4 4
5 4 4 4 4 3
6 4 4 3 3 4
7 3 4 4 4 4
8 3 4 3 4 4
9 4 4 3 3 4
10 4 4 4 3 3
11 4 3 3 3 3
12 3 2 3 3 3
13 4 3 3 4 4
14 4 4 4 3 4
15 4 3 4 2 3
16 4 4 3 4 4
17 3 4 4 4 4
18 3 3 3 3 4
19 3 4 4 3 3
20 4 3 3 3 3
Total 72 89 70 68 73
3.6 4.45 3.5 3.4 3.65
3.72
Results of Functionality
Respondents Q1 Q2 Q3 Q4 Q5
1 4 3 3 4 4
2 4 4 4 4 3
3 4 4 4 4 4
4 4 4 4 4 4
5 3 4 4 4 4
6 3 3 4 4 4
7 3 4 3 3 4
8 4 4 3 4 4
9 4 4 3 3 4
10 4 3 3 4 4
11 4 4 4 3 4
12 3 3 3 3 3
13 3 4 4 2 4
14 4 3 4 4 4
15 4 4 4 3 3
16 3 4 3 4 4
17 4 3 4 3 4
18 3 4 4 3 3
19 3 4 4 3 3
20 4 4 3 3 4
Total 72 74 73 69 71
3.6 3.7 3.65 3.45 3.55
3.59
Results of Originality
Respondents Q1 Q2 Q3 Q4 Q5
1 3 3 3 3 3
2 3 3 4 4 4
3 4 4 4 4 4
4 3 4 4 4 4
5 3 3 3 3 3
6 4 4 3 3 3
7 4 4 4 4 3
8 3 3 4 4 4
9 3 4 4 3 4
10 4 4 4 4 4
11 3 3 3 3 3
12 3 3 3 3 3
13 4 4 3 4 3
14 4 3 4 3 4
15 4 4 3 4 4
16 3 3 4 3 4
17 4 3 4 4 3
18 3 3 2 3 2
19 3 4 3 3 3
20 4 3 3 4 4
Total 69 69 69 70 69
3.45 3.45 3.45 3.5 3.45
3.56
CONCLUSION
Arduino-based GPS life vest for ALABAT- GUMACA Ferry Boat Passengers with GSM
Notification was built using GPS, GSM Module, Arduino Uno. It has a feature such as button to
immediately send emergency notifications with location with a waterproof resistance to protect
the system from water. The device was evaluated by the experts as highly acceptable across all
parameters.
RECOMMENDATIONS
The researchers had successfully achieved the objectives after conducting a series of tests and
analysis in developing the Device. Based on the conclusions, the following were hereby recommended:
1. There should be another button which indicate the on and off that will operate whenever the device is
getting used.
2. The red button that indicate the Emergency notification are slightly appeared to avoid suddenly pressed.
3. There should be a jelly or rubber case in the components of the device to avoid getting wet, it should be
water resistance.
4. The user must have any information in device, meaning to say, it must have data base that collects
Ayala, Patricia
Licardo, Jarvin P.