Professional Documents
Culture Documents
111051.Bsc 02.Hw - Mwtel.caaz - Aa Eno
111051.Bsc 02.Hw - Mwtel.caaz - Aa Eno
com
Analysis Result
CS/PS Traffic(Erl)
1.20% Access Success Rate (CSSR) Handover Success Rate (HOSR) Standard line
1.00%
105.00%
0.80% 100.00%
0.60% 95.00%
0.40% 90.00%
0.20% 85.00%
0.00% 80.00%
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 :0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0 :0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0
:0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0
0 0 04 0 8 12 16 20 00 04 08 12 16 20 0 0 04 0 8 12 16 20 0 0 04 0 8 12 16 20 00 04 08 12 16 20 0 0 04 0 8 12 16 20
6 6 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 6 6 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8
2 - 0 2- 0 2 - 0 2 - 0 2- 0 2 - 0 2- 0 2 - 0 2 - 0 2- 0 2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2- 0 2 - 0 2- 0 2 - 0 2- 0 2 - 0 2 - 0 2- 0 2 - 0 2- 0 2 - 0 2 - 0 2- 0 2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2- 0 2 - 0 2- 0
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 9 - 19 - 1 9 - 19 - 19 - 19 - 19 - 19 - 1 9 - 19 - 19 - 19 - 19 - 19 - 19 - 19 - 19 - 1 9 - 1 9 - 19 - 1 9 - 19 - 19 - 19 - 19 - 19 - 1 9 - 19 - 19 - 19 - 19 - 19 - 19 - 19 - 19 - 1 9 -
20 20 20 2 0 20 2 0 20 2 0 20 20 20 20 20 20 20 2 0 20 2 0 20 20 20 2 0 20 2 0 20 2 0 20 20 20 20 20 20 20 2 0 20 2 0
0 0
0
Board SndRcvMode Er- Cable Connect Cross Cable Connect Fault
ror
Call Drop Analysis-KPI
Call Drop Cause(%)
Radio Drop Rate of TCH
Radio Drop Rate of TCH(%)
1.2
1 M3030K:Call Drops on TCH M3030B:Call Drops on TCH
0.8 Ratio(Other) Ratio(Uplink Received Level)
0.6 3.09 M3030H:Call Drops on TCH M3030I:Call Drops on TCH
0.4 14.8 6.5 Ratio(Uplink Quality) Ratio(Downlink Quality)
0.2 3 M3030J:Call Drops on TCH M3030D:Call Drops on TCH
0 23.02 Ratio(Uplink and Downlink Ratio(Uplink and Downlink
Quality) Received Level)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 :0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 0:0 M3030C:Call Drops on TCH M3030A:Call Drops on TCH
:0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 :0 15.9 20.2 Ratio(Downlink Received Ratio(TA)
00 03 06 09 12 15 18 21 00 03 06 09 12 15 18 21 00 03 06 09 12 15 18 21 3 9
Level)
6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8
2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2- 0 2 - 0 2- 0 2 - 0 2- 0 2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2 - 0 2- 0 2 - 0 2- 0 2 - 0 2 - 0 16.35
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 9 - 19 - 19 - 1 9 - 1 9 - 1 9 - 19 - 19 - 19 - 19 - 19 - 19 - 1 9 - 19 - 19 - 19 - 19 - 19 - 19 - 19 - 19 - 1 9 - 19 - 19 -
20 2 0 20 20 20 20 20 20 20 20 2 0 20 20 20 20 20 20 20 20 2 0 20 20 20 20
Number of call drops on each subcounter(Erl)
155541
1600 00
1200 00
8 0 00 0 63895
62942
4 0 00 0
31581695 416 183 159 144
0
46 11
The call drop is mainly caused by :
(1) M3030K:Call Drops on TCH Ratio(Other)
(2) M3030B:Call Drops on TCH Ratio(Uplink Received
Level). The call drop rate is high.
The call drop counter mainly includes :
(1) Call Drops due to CONN FAIL Received on TCHH
(Traffic Channel) in Stable State (Radio Link Failure)
(2) Call Drops due to ERR IND Received on TCHH
(Traffic Channel) in Stable State (T200 Expired). The call
drop rate is high.
Call Drop Analysis-Parameter Check
PARA MO PARA ID PARA NAME network setting advise adjust reason License
SET GCELLCCCH FMSMAXOPCC MS_TXPWR_MAX_CCH 5(454)(900M),5(3) 5(900)0(1800) MS get the best the initial
(1800M),0(467)(1800M) access power
SET GCELLBASICPARA FRDLDTX FR Use Downlink DTX YES(915),NO(9) YES reduce downlink
interference
SET GCELLBASICPARA HRDLDTX HR Use Downlink DTX YES(915),NO(9) YES reduce downlink
interference
SET GCELLPWR3 AMRCALLPCALLOWED Allow III Power Control For ON(860),OFF(64) ON enable AMR power
AMR control ,reduce intra-
network interference.
SET GCELLCCBASIC SATIMEROPTSW SA Multiframe Counter ON(855),OFF(69) ON SACCH frame decode timer
Optimization Switch begin from BSC receive EST
INDICATION message.
SET GCELLBASICPARA HRULDTX HR Uplink DTX Shall_NOT_Use(9),Shall_Use( Shall_Use reduce uplink interference
915)
SET GCELLCCBASIC AFRSAMULFRM AFR SACCH Multi-Frames 48(728),56(2),50(3),40(1),52( 48 reduce the timer unproper
5),60(3),63(182) settings' influence to drop.
SET GCELLBASICPARA FRULDTX FR Uplink DTX Shall_NOT_Use(9),Shall_Use( Shall_Use reduce uplink interference
915)
SET GCELLCCBASIC REPEATSASET Repeated SACCH YES(915),NO(9) YES improve decode the
SACCH sucessful rate
SET GCELLCCBASIC AFRDSBLCNT AFR Radio Link Timeout 60_Times(4),48_Times(2),40_ 52_Times reduce the timer unproper
Times(2),36_Times(698),56_T settings' influence to drop.
imes(3),52_Times(35),64_Ti
mes(180)
Call Drop Analysis-RxLev RxQual Distribution
n of uplink level <= -90dBm is 46.87%, and the uplink coverage is Normal (threshold 50%).
= -80]. quality [6/7]= 0.81%, uplink The interference is normal. (threshold 1%).
evel <= -90dBm ratio is 21.73%, and the downlink coverage is Normal (threshold 40%).
[>= -80]. quality [6/7]= 2.28%, downlink Interference (threshold 1%).
1400000 1400000
1200000 1200000
1000000 1000000
800000 800000
RxLev RxLev
600000 600000
400000 400000
7 (>-70) 7 (>-70)
6 (-75~-70) 6 (-75~-70)
200000 200000
5 (-80~-75) 5 (-80~-75)
4 (-85~-80) 4 (-85~-80)
0 3 (-90~-85) 0 3 (-90~-85)
Quality Quality 2 (-95~-90) Quality Quality 2 (-95~-90)
level 0 level 1 Quality Quality 1 (-100~-95) level 0 level 1 Quality Quality 1 (-100~-95)
level 2 level 3 Quality Quality 0 (<-100) level 2 level 3 Quality Quality 0 (<-100)
level 4 level 5 Quality Quality level 4 level 5 Quality Quality
level 6 level 7 level 6 level 7
Call Drop Analysis-Summary of Optimization Measures
• Optimization Measures (For details, see the attachment.)
Call Drop
Before the optimization measures are implemented, strictly follow the three approvals and submit the RFC. Optimization Measure Summary.xl
ULQUALIMITAMRHR,DLQUALIMITAMRHR,ULQUALI UL Qual. Limit for AMR HR,DL Qual. Limit for AMR ULQUALIMITAMRHR(50),DLQUALIMITAMRHR(50),U ULQUALIMITAMRHR(40),DLQUALIMITAMRHR(40),U
MITAMRFR,DLQUALIMITAMRFR HR,UL Qual. Limit for AMR FR,DL Qual. Limit for LQUALIMITAMRFR(55),DLQUALIMITAMRFR(55) LQUALIMITAMRFR(40),DLQUALIMITAMRFR(40)
AMR FR
ULQUALIMIT,DLQUALIMIT UL Qual. Threshold,DL Qual. Threshold ULQUALIMIT(50),DLQUALIMIT(50) ULQUALIMIT(40),DLQUALIMIT(40)
Handover Analysis-KPI
Intra-Cell Handover Success Rate(%) Inter-BSC Incoming Handover Success Rate(%) Incoming Internal Handover Success Rate(%)
Overall Handover Success Rate(%) Outgoing Handover Success Rate of BSC(%) Inter-BSC Outgoing Handover Success Rate(%)
110
100
90
80
70
60
50
40
30
20
10
0
0 0 00 00 00 00 00 0 0 00 00 00 0 0 00 00 00 00 0 0 0 0 00 00 00 0 0 0 0 00 00 0 0 0 0 00 0 0 00 00 0 0 0 0 00 00 0 0 00
0 0: 0 0: 0 0: 0 0: 0 0: 0 0 : 0 0: 0 0: 00 : 0 0 : 0 0: 0 0: 0 0: 0 0: 00: 0 0: 0 0: 0 0: 0 0: 0 0 : 00: 0 0: 0 0: 00 : 0 0: 0 0: 0 0: 0 0: 0 0: 00 : 0 0: 0 0: 0 0: 0 0: 0 0: 0 0:
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
00 02 04 06 08 10 12 14 16 18 20 22 00 02 04 06 08 10 12 14 16 18 20 22 00 02 04 06 08 10 12 14 16 18 20 22
0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8
1 2- 1 2- 12 - 1 2- 1 2- 12 - 1 2- 1 2- 12 - 1 2 - 1 2- 1 2 - 1 2- 1 2- 12 - 1 2- 1 2- 1 2- 1 2- 1 2 - 12 - 1 2- 1 2- 1 2 - 1 2- 1 2- 1 2- 1 2- 1 2- 1 2 - 1 2- 1 2- 1 2- 12 - 1 2- 1 2-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0 19 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Handover Analysis-Intra-BSC Handover
Inter-BSC Handover Failure Category
Number of Outgoing Internal Handover Times
Commands, Requests, Successes, and H312A:Number of Failed H312Dp:Number of Failed H312Dc:Number of Failed H312Dq:Number of Failed H312Da:Number of Failed The intra-BSC outgoing cell handover is
Outgoing Internal Inter-Cell Outgoing Internal Inter-Cell Outgoing Internal Inter-Cell Outgoing Internal Inter-Cell Outgoing Internal Inter-Cell
Failures Handovers (No Channel Handovers(Protocol Error Un- Handovers(Abnormal Release, Handovers(Other Causes) Handovers(Abnormal Release, mainly caused by :
Available) specified) Timer Expired) Unspecified)
CH310:Number of Outgoing Internal 630153CH312C:Number of Unsuc- H312Dd:Number of Failed H312Dh:Number of Failed H312Df:Number of Failed H312B:Number of Failed
(1) H312A:Number of Failed Outgoing
Inter-Cell Handover Requests 96 cessful Outgoing Internal In-
ter-Cell Handovers (Timer
Outgoing Internal Inter-Cell
Handovers(Abnormal Release,
Outgoing Internal Inter-Cell
Handovers(Frequency Un-
Outgoing Internal Inter-Cell
Handovers(Handover Failed,
Outgoing Internal Inter-Cell
Handovers (Terrestrial Re-
Internal Inter-Cell Handovers (No Channel
CH313:Number of Successful Outgoing 605496Expired) No Activity on the Radio Path) available) Timing Advance out of source Request Failed) Available)
Range)
Internal Inter-Cell Handovers" 10 H312G:Number of Failed H4100J:Codec Change Re- H312I:Number of Unsuccess- H312Db:Number of Failed H312Do:Number of Failed (2) H312Dp:Number of Failed Outgoing
CH312:Number of Unsuccessful Outgoing
Outgoing Internal Inter-Cell
246578Handovers (A Interface
jected by the MSC(Other
Causes)
ful Outgoing Internal Inter-
Cell Handovers (Channel Ac-
Outgoing Internal Inter-Cell
Handovers(Abnormal Release,
Outgoing Internal Inter-Cell
Handovers(No Cell Allocation
Internal Inter-Cell Handovers(Protocol Error
Internal Inter-Cell Handovers 6 Failure) tivation Failed) Channel Unacceptable) Available) Unspecified)
CH311:Number of Outgoing Internal 620424 failure.
Inter-Cell Handover Commands 03
Number of intra-BSC incoming handover Times Incoming Internal Handover Failure Category
requests, successes, detection, responses,
and failures
H322D:Number of Unsuccess- H3229A:Number of Unsuc-
The intra-BSC incoming cell handover is
CH320:Number of Incoming Internal 630153 ful Incoming Internal Inter- cessful Incoming Internal In- mainly caused by :
Inter-Cell Handover Requests 86 Cell Handovers (Reconnection ter-Cell Handovers (No
to Old Channels Canceled) Channel Available) (TCH) (1) H322D:Number of Unsuccessful
CH323:Number of Successful Incoming 60549563074 371 368 41 CH322C:Number of Unsuc- H322B:Number of Unsuccess-
Internal Inter-Cell Handovers 87 cessful Incoming Internal In- ful Incoming Internal Inter- Incoming Internal Inter-Cell Handovers
CH324:Number of Incoming Internal 613886 972
ter-Cell Handovers (Timer
Expired)
Cell Handovers (Terrestrial
Resource Request Failed) (Reconnection to Old Channels Canceled)
Inter-Cell Handover Detection Messages 55
356 H322G:Number of Unsuccess- H322I:Failed Incoming In- (2) H3229A:Number of Unsuccessful
142 ful Incoming Internal Inter- ternal Inter-Cell Handovers
Received by BSC 958 Cell Handovers (Failure on A (Channel Activation Failed) Incoming Internal Inter-Cell Handovers (No
6 Interface)
CH321:Number of Incoming Internal 620423 Channel Available) (TCH)
Inter-Cell Handover Responses 93 failure.
CH322:Number of Unsuccessful Incoming 246579
Internal Inter-Cell Handovers 9
Handover Analysis-Inter-BSC Handover
Inter-BSC Outgoing Handover Failure Category
Inter-BSC Outgoing Handover Times
Commands, Requests, Successes, and
CH332K:Failed Outgoing Ex- H332Kf:Failed Outgoing Ex- CH332D:Failed Outgoing Ex-
ternal Inter-Cell Handovers ternal Inter-Cell ternal Inter-Cell Handovers
H332Dp:Failed Outgoing Ex-
ternal Inter-Cell
H332Dc:Failed Outgoing Ex- H332Da:Failed Outgoing Ex-
ternal Inter-Cell ternal Inter-Cell
H332Dq:Failed Outgoing Ex-
ternal Inter-Cell
The inter-BSC outgoing cell handover is
Failures (Handover Request Rejected) Handovers(Invalid Cell) (Reconnection to Old Chan-
nels)
Handovers(Protocol Error Un-
specified)
Handovers(Timer Expired ) Handovers(Abnormal Release,
Unspecified)
Handovers(Other Causes) mainly caused by :
CH330:Outgoing External Inter-Cell 166798H332DD:Failed Outgoing Ex- CH332C:Failed Outgoing Ex- H332Dh:Failed Outgoing Ex- H332Kn:Failed Outgoing Ex- H332Kb:Failed Outgoing Ex- H332Kc:Failed Outgoing Ex- H332Df:Failed Outgoing Ex- (1) CH332K:Failed Outgoing External Inter-
ternal Inter-Cell ternal Inter-Cell Handovers ternal Inter-Cell ternal Inter-Cell ternal Inter-Cell ternal Inter-Cell ternal Inter-Cell
Handover Requests 8 Handovers(No Activity on the (T8 Expired) Handovers(Frequency Un- Handovers(Other Causes) Handovers(Equipment Fail- Handovers(No Radio Resource Handovers(Handover Failed, Cell Handovers (Handover Request Rejected)
CH333:Successful Outgoing External 150064
Radio Path) available) ure) Available) Timing Advance out of
Range) (2) H332Kf:Failed Outgoing External Inter-
Inter-Cell Handovers 0 H332Dm:Failed Outgoing Ex- H332Kd:Failed Outgoing Ex- H332Ka:Failed Outgoing Ex- H332Dk:Failed Outgoing Ex- CH332L:Failed Outgoing Ex- Cell Handovers(Invalid Cell)
ternal Inter-Cell ternal Inter-Cell ternal Inter-Cell ternal Inter-Cell ternal Inter-Cell Handovers
CH331:Outgoing External Inter-Cell 157536Handovers(Message Type Not Handovers(Requested Terres- Handovers(OM Intervention) Handovers(Invalid Mandatory (T7 Expiry) failure.
Compatible with Protocol trial Resource Unavailable) Information)
Handover Commands 2 State)
Number of incoming inter-BSC handover Times Inter-BSC Incoming Handover Failure Category
requests, successes, detection, responses,
H3429A:Failed Incoming Ex- H342H:Failed Incoming Ex-
and failures
ternal Inter-Cell Handovers ternal Inter-Cell Handovers The incoming external inter-cell handover is
CH340:Incoming External Inter-Cell 186970 (No Channel Available) (TCH) (Clear Commands Sent By
7183 7182 2427 308
MSC) mainly caused by the :
Handover Requests 4 H342HH:Cleared Incoming
External Inter-Cell Handovers
CH342C:Failed Incoming Ex-
ternal Inter-Cell Handovers
(1) H3429A:Failed Incoming External Inter-
CH343:Successful Incoming External 166777
Inter-Cell Handovers 3
By MSC(Other Causes) (Timer Expired) Cell Handovers (No Channel Available) (TCH)
62102 H3429Ca:Failed Incoming Ex- H342HB:Cleared Incoming
CH341:Incoming External Inter-Cell 173969 129926 ternal Inter-Cell Handovers External Inter-Cell Handovers (2) H342H:Failed Incoming External Inter-
(Timer Expired) (TCH) By MSC(Radio interface fail-
Handover Responses 3 64837 ure) Cell Handovers (Clear Commands Sent By
CH344:Incoming External Inter-Cell 170957
H342HA:Cleared Incoming
External Inter-Cell Handovers
MSC)
Handover Detection Messages Received 1 By MSC(Radio Interface Mes- failure.
sage Failure)
by BSC
CH342:Failed Incoming External Inter-Cell 201931
Handovers
Handover Analysis-Parameter Check
PARA MO PARA ID PARA NAME network setting advise adjust reason License
SET GCELLSOFT ADAICFLAG Interference Cancel Mode OFF(924) ON decrease uplink interference
Adaptation
SET GCELLHOBASIC MRINTRPLOPTSWITCH MR Interpolation Optimize NO(924) YES the lost MR will be
compensated in linear way
for the rxqual and rxlev,
which will give more
handover chance to
improve drop.
SET GCELLBASICPARA DIRECTRYEN Directed Retry YES(12),NO(912) YES decrease the congestion
influence to handover
SET GCELLHOBASIC EDGESTAT1 Handover Algorithm I Edge 6(924) 1 decreae th edge handover
HO Watch Time limit condition
SET GCELLSOFT STIRCALLOWED EICC Allowed NO(924) YES decrease uplink interference
ce l ce e te te ct re ll s e n e
High incoming handover success 18.222 n al n at ra ra je lu ce re nc io ng
re sm re ssr s s e fa
i d i l u re st a
rate rfe is rfe e es es er
r
er
li rf
a fe ng
e ch
te o n t e u cc u cc u cc v v n va e t er o o n
n n o do v n c i
k
i rti k
i rs rs rs d fi o i f rs
Low incoming handover success 52.228 l in po l in ve ve ve h an h an eo a nd l i nk s eo ve
ro o o o s h u e
wn rp up an
d
an
d
an
d
SC el
ls ca
u
ite up ca oi
c
rate do e h h h B -c b e -s n g b e v
ov g g el er ll ct tra o ct of
a nd m
in
m
in l ev i nt ce je in str e je se
P e r u
much inter BSC handover reject 7.308 lh co co w
uc
h
TO er
r
an
y
er ec
a
cel in
h
in Lo m v m o v b
r w g do d ct
better cell handover proportion is 67.320 e tt e Lo Hi an h an r e je
b h
SC SC er
small B r B o ve
r te d
te in an
in h h
strong uplink interference 0.969 h h
uc uc uc
m m m
many intra-site handover failures 3.857
much handoveer reject because of 0.288
voice version change
uplink interference 61.635
much inter BSC handover reject 4.471
because of invalid cell
Handover Analysis-Summary of Optimization Measures
• Optimization Measures (For details, see the attachment.)
Handover
Before the optimization measures are implemented, strictly follow the three approvals and submit the RFC. Optimization Measure Summary.xls
88
0.04
86 0.02
84 0
0 0 00 00 00 0 0 00 0 0 00 00 00 0 0 00 0 0 00 0 0 00 0 0 00 00 00 00 00 0 0 00 00 00 0 0 00 0 0 0 0 00 0 0 00 00 0 0 0 0
0 0: 0 0 : 0 0: 0 0: 0 0: 00 : 0 0: 0 0 : 0 0 : 0 0: 0 0: 0 0: 0 0: 00 : 0 0 : 0 0: 00: 0 0: 0 0: 0 0: 0 0 : 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 00 : 0 0: 0 0: 00 : 0 0: 0 0:
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
00 02 04 06 08 10 12 14 16 18 20 22 00 02 04 06 08 10 12 14 16 18 20 22 00 02 04 06 08 10 12 14 16 18 20 22
0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 6 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8 0 8
1 2- 1 2 - 1 2 - 1 2- 1 2- 12 - 1 2- 1 2 - 12 - 1 2- 1 2- 12 - 1 2- 1 2- 1 2 - 1 2- 12 - 1 2- 1 2- 12 - 1 2 - 1 2- 1 2- 12 - 1 2- 1 2 - 1 2- 1 2- 1 2- 1 2- 1 2 - 1 2- 1 2- 12 - 1 2- 1 2-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0 19 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019 019
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Access Analysis-Parameter Check
PARA MO PARA ID PARA NAME network setting advise adjust reason License
SET GCELLCCCH FMSMAXOPCC MS_TXPWR_MAX_CCH 5(454)(900M),5(3) 5(900)0(1800) MS get the best the initial
(1800M),0(467)(1800M) access power
SET GCELLSOFT ADAICFLAG Interference Cancel Mode OFF(924) ON decrease uplink interference
Adaptation
SET GCELLBASICPARA DIRECTRYEN Directed Retry YES(12),NO(912) YES decrease the congestion
influence to handover
SET GCELLBASICPARA PDCH2SDEN Dynamic PDCH Conversion to YES(855),NO(69) YES Dynamic PDCHs can be
SDCCH Allowed converted to SDCCHs directly.
SET GCELLSOFT STIRCALLOWED EICC Allowed NO(924) YES decrease uplink interference
SET GCELLPSPWPARA SUPGPRSDLPC DL GPRS Closed-Loop Power YES(860),NO(64) YES reduce the PS to CS influence
Control Support
SET GCELLCCTMR N200PARASWITCH Use LAPDm N200 ON(869),OFF(55) ON reduce the timer unproper
settings' influence to drop.
SET GCELLSOFT ADAICADFLAG Enhanced Interference Cancel OFF(924) ON decrease uplink interference
Mode Adaptation
SET GCELLBASICPARA IMMASSEN TCH Immediate Assignment YES(11),NO(913) NO Increase the immediate
Allowed assignment success rate
SET GCELLCCTMR N200ESTAB N200 of Establish 5(11),254(3),23(855) 13,8,23,18 increase the N200 of
establish times, make
handover or access sucessful
rate increase.
SET GCELLPSPWPARA DLPCSTARTTHR DL EGPRS Power Control MCS9(58) MCS5 reduce the PS to CS influence
Access Analysis-Immediate Assignment
HQI Analysis-KPI(%)
100
99
98
97
96 Standard line
95
Uplink HQI
94
93
Downlink HQI
92
0 0 0 0 0
00 00 0 00 000 00 00 00 00 00 00 00 00 00 00 00 00 00
:0 :0 :0 :0 :0
0: 0: :0 0: :0
0: 0: 0: 0: 0: 0: 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0: 0 0:
00 00 00 00 00 0 0 00 0 000 0 0 0 0 0 0
0:
0 0 3: 0 0 6: 1 19: 1 2:
21
:
00
:5: 03
: 8:
06
:
09
:
12
:
15
:
18
:
21
:
00
:
03
:
06
:
09
:
12
:
15
:
18
:
21
:
6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8
2 - 0 2- 0 2 - 0 2 - 0 2 - 0 2 - 0 2- 0 2- 0 2- 0 2- 0 2- 0 2- 0 2- 0 2- 0 2 - 0 2 - 0 2- 0 2- 0 2- 0 2- 0 2- 0 2- 0 2 - 0 2 - 0
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 9- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19- 19-
20 20 20 20 20 20 20 20 20 20 20 2 0 2 0 2 0 20 20 20 20 20 20 20 20 20 20
HQI Analysis-RxLev RxQual Distribution
n of uplink level <= -90dBm is 46.87%, and the uplink coverage is Normal (threshold 50%).
= -80]. quality [6/7]= 0.81%, uplink The interference is normal. (threshold 1%).
evel <= -90dBm ratio is 21.73%, and the downlink coverage is Normal (threshold 40%).
[>= -80]. quality [6/7]= 2.28%, downlink Interference (threshold 1%).
1400000 1400000
1200000 1200000
1000000 1000000
800000 800000
RxLev RxLev
600000 600000
400000 400000
7 (>-70) 7 (>-70)
6 (-75~-70) 6 (-75~-70)
200000 200000
5 (-80~-75) 5 (-80~-75)
4 (-85~-80) 4 (-85~-80)
0 3 (-90~-85) 0 3 (-90~-85)
Quality Quality 2 (-95~-90) Quality Quality 2 (-95~-90)
level 0 level 1 Quality Quality 1 (-100~-95) level 0 level 1 Quality Quality 1 (-100~-95)
level 2 level 3 Quality Quality 0 (<-100) level 2 level 3 Quality Quality 0 (<-100)
level 4 level 5 Quality Quality level 4 level 5 Quality Quality
level 6 level 7 level 6 level 7
HQI Analysis-HQI Failure Scenario
Proportion of Failed HQIs in Failed Scenarios(%)
40.00%
34.89 33.91
30.00%
HQI Failure Scenario Failure Ratio
(%) 20.00%
SET GCELLBASICPARA FRDLDTX FR Use Downlink DTX YES(915),NO(9) YES reduce downlink interference
SET GCELLBASICPARA HRDLDTX HR Use Downlink DTX YES(915),NO(9) YES reduce downlink interference
SET GCELLCHMGBASIC CHALLOCSTRATEGY Channel Allocate Strategy CAPABILITY(70),QUALITY(854) QUALITY Channel Allocation Quality
Factor First
SET GCELLPWR3 AMRCALLPCALLOWED Allow III Power Control For ON(860),OFF(64) ON enable AMR power
AMR control ,reduce intra-network
interference.
SET GCELLPSPWPARA SUPPSDLPC DL EGPRS Closed-Loop Power YES(915),NO(9) YES reduce the PS to CS influence
Control Support
SET GCELLBASICPARA HRULDTX HR Uplink DTX Shall_NOT_Use(9),Shall_Use(9 Shall_Use reduce uplink interference
15)
SET GCELLBASICPARA FRULDTX FR Uplink DTX Shall_NOT_Use(9),Shall_Use(9 Shall_Use reduce uplink interference
15)
SET GCELLPSPWPARA SUPGPRSDLPC DL GPRS Closed-Loop Power YES(860),NO(64) YES reduce the PS to CS influence
Control Support
SET GCELLPSCHM MAXPDCHRATE Maximum Rate Threshold of 60(9),50(17),70(67) 30 Reduce the PS interference to
PDCHs in a Cell the CS.
SET GCELLPSPWPARA DLPCSTARTTHR DL EGPRS Power Control MCS9(58) MCS5 reduce the PS to CS influence
Enable Coding Scheme Thres.
HQI Analysis-Summary of Optimization Measures
• Optimization Measures (For details, see the attachment.)
HQI Optimization
Before the optimization measures are implemented, strictly follow the three approvals and submit the RFC. Measures Summary.xls
ULQUALIMITAMRFR,DLQUALIMITAMRFR UL Qual. Limit for AMR FR,DL Qual. Limit for AMR ULQUALIMITAMRFR(55),DLQUALIMITAMRFR(55) ULQUALIMITAMRFR(50),DLQUALIMITAMRFR(50)
FR
ULQUALIMIT,DLQUALIMIT UL Qual. Threshold,DL Qual. Threshold ULQUALIMIT(60),DLQUALIMIT(60) ULQUALIMIT(50),DLQUALIMIT(50)
ULQUALIMITAMRHR,DLQUALIMITAMRHR,ULQUALI UL Qual. Limit for AMR HR,DL Qual. Limit for AMR ULQUALIMITAMRHR(55),DLQUALIMITAMRHR(60),U ULQUALIMITAMRHR(50),DLQUALIMITAMRHR(50),U
MITAMRFR,DLQUALIMITAMRFR HR,UL Qual. Limit for AMR FR,DL Qual. Limit for LQUALIMITAMRFR(60),DLQUALIMITAMRFR(65) LQUALIMITAMRFR(50),DLQUALIMITAMRFR(50)
AMR FR
DLEDGETHRES Edge HO DL RX_LEV Threshold DLEDGETHRES(25) DLEDGETHRES(28)
DLQUALIMITAMRHR,DLQUALIMITAMRFR DL Qual. Limit for AMR HR,DL Qual. Limit for AMR DLQUALIMITAMRHR(60),DLQUALIMITAMRFR(60) DLQUALIMITAMRHR(50),DLQUALIMITAMRFR(50)
FR
Thank you
www.huawei.com
www.huawei.com