This document summarizes different types of screwdrivers and wrenches. It lists 5 types of screwdrivers: standard slot, Philips, clutch head, Torx head, stub, and offset. It then asks the reader to identify the use of each type. It also lists 6 types of wrenches: open wrench, box wrench, combination wrench, adjustable wrench, pipe wrench, and flare nut wrench before asking the reader to identify each type.
This document summarizes different types of screwdrivers and wrenches. It lists 5 types of screwdrivers: standard slot, Philips, clutch head, Torx head, stub, and offset. It then asks the reader to identify the use of each type. It also lists 6 types of wrenches: open wrench, box wrench, combination wrench, adjustable wrench, pipe wrench, and flare nut wrench before asking the reader to identify each type.
This document summarizes different types of screwdrivers and wrenches. It lists 5 types of screwdrivers: standard slot, Philips, clutch head, Torx head, stub, and offset. It then asks the reader to identify the use of each type. It also lists 6 types of wrenches: open wrench, box wrench, combination wrench, adjustable wrench, pipe wrench, and flare nut wrench before asking the reader to identify each type.
tools TYPES OF SCREW DRIVERS 1.STANDARD SLOT SCREWDRIVER
A tool used for turning with a slot-
head bolt or screw. 2.PHILIPS SCREWDRIVER
A tool used for turning with
Phillips-head bolts or screw. 3.CLUTCH HEAD
A tool used for turning with a
clutch head bolt or screw. 4.TORX HEAD
- A tool used for turning with a torx
bolt or screw. 5.STUB
A tool used for tightening or loosening in
places where a longer blade will not fit especially in narrow places. 5.OFFSET
- A tool used for turning with a torx
bolt or screw. EXPLAIN THE USE OF EACH ITEM 1. 2. 3. 4. identification 1. A.offseT 2. B. Torx HEAD STANDAR 3. C. D SLOT 4. D. stub TYPES OF WRENCHES 1.OPEN WRENCH
A tool used for working with hex-head bolts,
nuts, or screws. 2.BOX WRENCH
- Refers to the tool with flat interior surfaces
so that it is less likely to slip off when working with hex-head bolts, nuts, or screws. 3.COMBINATION WRENCH
A tool with an open end and box end. It is designed for
the convenience of an operator who may need an open end for speed tightening and loosening while the box end is used for adding torque. 4.adjustable WRENCH
A tool used for working with hex-head bolts,
nuts, and screws in various sizes. 5.pipe WRENCH
is a tool used for working with pipe, pipe
fittings, and other rounded surfaces. 6.FLARE NUT WRENCH
is a tool used for working with hex-head
nuts, bolts, or screws in which the open end permits the wrench to slip over tubing. identification 1. 5. 2. 6. 3. 7. 4. 8.