Professional Documents
Culture Documents
Clase3 Taladrado
Clase3 Taladrado
PROCESO DE TALADRADO
PROCESO DE TALADRADO
PARTES DE UNA BROCA
Calculo de las RPM:
(PULG)
Speeds and Feeds in Drilling
Note: As hole depth increases, speeds and feeds should be reduced. Selection of speeds and
feeds also depends on the specific surface finish required.
Speeds and Feeds in Drilling
EJEMPLO:
FORMULA: RPM=1000(V)/(PI)(D) EN MM
RPM= 12(V)/(PI)(D) EN PULG.
Speeds and Feeds in Drilling
EJEMPLO:
CALCULA LAS RPM QUE SE REQUIEREN PARA
BARRENAR A ½” UNA PIEZA DE ALUMINIO.
SABEMOS QUE EL BARRENO A REALIZAR SERA
DE 1” DE PROFUNDIDAD.
RESPUESTA:
12 (100)/(3.1416)(.5)
=1200/1.5708
=763.9 RPM
Speeds and Feeds in Drilling
RESPUESTA:
FEED= IPR * RPM
=.012* 763.9
= 9.16 IPM
https://www.youtube.com/watch?v=ycb4r0_5zkw
Herramienta: MACHUELO
https://www.youtube.com/watch?v=r-
O5ffhFPss
MACHUELO
Herramienta: TARRAJA
https://www.youtube.com/watch?
v=pCyFcR7DzeM