Professional Documents
Culture Documents
• To spool the cable out, remove the connector from its storage
location and place it in the ground in front of the drum. Travel in
reverse as you spool the cable out. Take care to match the driving
speed to minimize cable tension and bunching.
• Do the opposite to spool the cable in.
Layout Boom:
• Placing cable on the burm. You will be traveling forward,
placing the cable to the left. With the cable laid out in front
of the machine, pick up the end of the cable with the grapple
(roller facing the machine) and swing it to the left hand side
of the machine and place it on the burm.