Professional Documents
Culture Documents
(BPN2)
There are 2 parameters related to configuration of BPN2 board : radioMode & functionMode
These parameters give the radio and function mode used for BPN2 bord.
For example the value of radioMode : (16) means that the Radio mode used is LTE single mode
and (2;16) the radio mode used is GSM & LTE Both .
For example the value of functionMode : (770) means that the BPN2 Board process 24 TRX
and 9 UMTS cells and (4872) process 12 TRX + 6UMTS Cells + 6FDL (LTE cells).
The below tables show the differents values of Radio mode & Function mode.
There are two type of export to get the informations of parameters radioMode &
functionMode and also the slot position of BPN2 baord optimization data export & Public
export.
Optimization Data Export NE Type:Multi-Mode Base Station/Template Type: Optimization /Data Type: sdr3
Public Data Export NE Type:Multi-Mode Base Station/Template Type: Plan/Data Type: sdr3
In second export Public Data Export Result the radiomode and function mode parameters are
in slot column for example the below case:
The BPN2 is on slot 7 with radio mode 1;2 means (GSM;UMTS) and function mode is 770
means 24G + 9U . The separation between radio mode and function mode is by comma (,)
BPN2,1;2,770
Audit was done in Laghouat wilaya in order to share the BPN2 board with UMTS technology
for board used only for single technology (LTE single technology or GSM single technology).
The changes will increases the capcity of ressources CE and decreases the utilisation of CE
ressources which leads to reduce the numbe of sites in framing report for CE recomendation.
To change the BPN2 configuration of node B should know some important informations
(Number of TRX in GSM part/ Number of 3G cells/Number of LTE cells) and also.
Need also to know the sites if contain UPBG / UPBG3 board for TRX processing.
CR ID 13926 was raised in order to change the configuration of BPN2 board for below node B
in Laghouat region.
MODIND SubNetwork MEID Site Name description
M 4 72 03619 -- AFLOU III BPN2(1.1.6)
M 4 77 03666 OUM GRINE BPN2(1.1.6)
M 4 82 03607-CCLT L BPN2(1.1.6)
M 4 88 03639- LAGHOUAT I BPN2(1.1.6)
M 4 502 031021-Hai AI Mossalaha BPN2(1.1.6)
M 4 103 03669- AFLOU IV BPN2(1.1.7)
M 4 103 03669- AFLOU IV BPN2(1.1.8)
M 4 142 031001--Haie Houari Boumedien BPN2(1.1.7)
M 4 503 031002-Cite de Iindependence BPN2(1.1.7)
M 4 74 03104 AFLOU BPN2(1.1.7)
M 4 81 03641 BPN2(1.1.8)
M 4 91 03655 BPN2(1.1.6)
NodeB 03619
Conclusion
- The change of configuration of BPN2 (Share with UMTS technology ) give very good result
by increasing the CE capacity used in 3G side and reducing the high utilization of CE
resources which leads to reduce the number of additional board needed.