This document provides instructions for completing Lab 1, which involves setting up an internet simulation using Cisco Packet Tracer. It details:
1) Connecting a PC to a modem using Ethernet and configuring the PC's IP using DHCP.
2) Adding a wireless router to connect additional devices and test internet connectivity using ping and nslookup commands.
3) Configuring email on the PC and sending/receiving emails between the PC and laptop within the simulation.
4) Connecting the modem to a switch and access point to provide internet access to multiple devices.
This document provides instructions for completing Lab 1, which involves setting up an internet simulation using Cisco Packet Tracer. It details:
1) Connecting a PC to a modem using Ethernet and configuring the PC's IP using DHCP.
2) Adding a wireless router to connect additional devices and test internet connectivity using ping and nslookup commands.
3) Configuring email on the PC and sending/receiving emails between the PC and laptop within the simulation.
4) Connecting the modem to a switch and access point to provide internet access to multiple devices.
This document provides instructions for completing Lab 1, which involves setting up an internet simulation using Cisco Packet Tracer. It details:
1) Connecting a PC to a modem using Ethernet and configuring the PC's IP using DHCP.
2) Adding a wireless router to connect additional devices and test internet connectivity using ping and nslookup commands.
3) Configuring email on the PC and sending/receiving emails between the PC and laptop within the simulation.
4) Connecting the modem to a switch and access point to provide internet access to multiple devices.