Professional Documents
Culture Documents
Converting tables
1"
114"
11 2"
2"
212"
3"
312"
4"
5"
8"
10"
9,5 -
Temperature scales
100 90 80 70 60 50 40 35 30 25 20 15 10 5 0 5 10 15 17,8 20 25 30
1 cm = 10 mm 1 dm = 10 cm = 100 mm
To convert Centigrade to Fahrenheit: Multiply Centigrade by 1,8 and add 32. F = (C x 1,8) + 32 To convert Fahrenheit to Centigrade: Subtract 32 from Fahrenheit and divide by 1,8. C = (F 32) : 1,8
Overview
Geberit HDPE
Drainage system Application field for pipes and fittings HDPE pipes, fittings and tools Jointing methods Water proofing page 3 4 5 7 817 19 2021
22 23 2426 2730
Mounting instructions
Butt welding Electro welding Prefabrication Repair tool Expansion sockets 3436 3739 4042 43 44
Norms/Certificates
81
Drainage system
5 6 6
2 8 1 7
1 Ground pipe 2 Main stack 3 Branch pipe 4 Connector pipe 5 Ventilation stack 6 Rainwater down pipe 7 Domestic drainage 8 Public sewer
Description Symbol Pipe Bend 45 Bend 8812 Bend 90 Branch 45 Branch 8812 Ball fittings Reducer Apparatus connections Butt welded joints Electroweld sleeve coupling/flange
Pressure load X X X X X X X
Pluvia X X X X X X X X X X X X
Expansion socket Ring seal socket Flange bushing Double flange bushing Access pipe
X X X X X
X X X X
X X X X
X X X
44
5m
HDPE pipes Nominal (Outside) Wall dia. thickness d (mm) s (mm) 32 3 40 3 50 3 56 3 63 3 75 3 90 3,5 110 4,3 125 4,9 160 6,2 200 6,2 250 7,8 315 9,8 Inside dia. di (mm) 26 34 44 50 57 69 83 101,4 115,2 147,6 187,6 234,4 295,4 Area A (cm2) 5,3 9,0 15,2 19,6 25,4 37,3 54,1 80,7 104,5 171,1 276,4 431,5 685,3 Weight empty kg/m 0,259 0,331 0,420 0,471 0,536 0,644 0,903 1,350 1,750 2,840 3,580 5,630 8,920 Weight full kg/m 0,790 1,239 1,940 2.434 3,087 4,383 6,313 9,424 12,171 19,947 31,216 48,774 77,442 Pressure* nominal PN 10 6 6 6 4 4 4 4 4 4 3,2 3,2 3,2 Series (ISO) S 5 6,3 8,3 10 12,5 12,5 12,5 12,5 12.5 16 16 16
Art. No. 379.000.16.0 360.000.16.0 361.000.16.0 363.000.16.0 364.000.16.0 365.000.16.0 366.000.16.0 367.000.16.0 368.000.16.0 369.000.16.0 370.000.16.0 371.000.16.0 372.000.16.0
Standard length of Geberit HDPE pipes = 5 meters (5000 mm) * = Nominal pressure refers to pipe only not to fittings ISO = International Standard Organisation
Standards
International European Switzerland Germany Austria France Italy Belgium Netherlands Denmark Great Britain Australia Singapore
ISO 8770 / 8772 CEN / TC 155 / CEN EN 12056 SN 592 000 DIN 8075 / 19535 / 19537 B 5177 NF T 54 072 UNI 8451 NBN 42-112 NEN 7008 NKB Nr. 8 BS /6367/5572/6437/5114 MP52 W Spec 005 PSB/ENV
HDPE fittings
66
Geberit tools
Pipe Cutter
Welding Plate
Repair Tool
Electrofusion Machine
B.356.220/001
Start Switch
MASCH
" te "BARY appara hweiss toff-Sc Kunsts AType: Volt 230 iz) Watt (Schwe Nr. 45 en Basel rasse W.Ries Dittingerst
90 50 110 63 75 125 160
Butt weld
Ring-seal socket
Screw-threaded joint
Flange joint
Contraction sleeve
These connections have different properties, and are therefore classified according to the way in which they are assembled as follows: a) To be opened Jointing methods which can be disconnected after assembly. b) Not to be opened Jointing methods which cannot be disconnected after assembly. c) Tension-resistant Connections which withstand tensional forces. d) Non-tension-resistant Connections which cannot withstand tensional forces.
Application
Jointing methods
Situation
Butt weld
Flange joint
Contraction sleeve
Coupling
Tension resistant Not to be opened Tension resistant To be opened Non-tension resistant Not to be opened Non-tension resistant To be opened
X X X X X X X X
Butt welding
All diameters from 32 to 315 mm can be welded. Connection properties b) not to be opened c) tension-resistant Use Welding is the easiest jointing method, providing the many advantageous benefits of prefabrication; HDPE needs no other component in order to be welded. It can be used in all circumstances where prefabrication is used on site or in the workshop. The essential conditions for a perfect weld are: Cleanliness of the welding plate and the parts which are to be welded. A correct welding plate temperature. The correct pressure for jointing the parts. The parts to be welded must be cut square < ) 90. Butt welding takes up little space. The edge of the weld does not obstruct the pipe, leaving its internal cross-section virtually unchanged. Even quite complicated distribution parts can be assembled in a small space, without wastage of material, because lengths of pipe or elbow sections can be easily reused through butt welding.
The allowance for butt welds is approx. as big as the wall thickness of the pipe. pipe diameter (mm) 3275 butt weld s (mm) 3 90 4 110 5 125 5 160 7 200 7 250 8 315 10
Manual welding up to 75 mm
A
kg 5 6 7 8 9 10 15 22 28 45 57 90 140
90 0 50 11 63 75
5 12 16 0
MAS
Use On-site welding, conversion, additional installations, repairs. The small outside diameter provides a great advantage. A short, simple and reliable connection Conventional assembly, on the nesting principle, made for easy use. The joint obtained is simple, quick and reliable. The heating and melting zone is divided into two fields, as there are no electrical resistances in the centre of the sleeve. This provides a very satisfactory safety factor.
60
Also the ends of the pipes are not heated, the zones remain effectively cold, and provide further reinforcement, thus cancelling out shrinkage of the pipe. The pressure required for welding is obtained from the shrinking effect of the sleeve when it is heated, and is evenly distributed over the entire weld. This shrinkage has a compensating effect on pipe diameter measurement tolerances. The electrical resistance wires will not corrode. Once the weld has been made they are entirely covered by PE. The use of original Geberit equipement, especially tempered Geberit HDPE pipes, are recommended for correct welding.
40 160
150
200 315
Electrical sleeves can be made to slide by removing the central stop ring, thus making system conversion and repair work easier.
B.500.000/191
10
Use Ring-seal socket joints can be used to provide a connection between various prefabricated parts for simpler assembly.
Assembly May be used either vertically or horizontally. The small overall dimensions provide an advantage where space is limited. Can easily be assembled or released even where access is difficult.
Protection cap
Ring-seal sockets are provided with a yellow protection cap to prevent the ingress of debris during installation.
Assembly instructions are the same for both ring-seal sockets and screw-threaded joints, the sleeve lengths are the same for corresponding diameters. The effective sleeve length, i. e. the measurement X from the O-ring to the base of the socket governs the maximum length of pipe which can be connected by individual joints. For HDPE approximately 15 mm of spigot should be allowed for every 1 m of pipe. The pipe must be fully inserted into the socket, because the socket does not act as an expander. Owing to the pipe thickness and the low thermal conductivity of HDPE, the socket seal has very satisfactory resistance to heat and no shrinkage of the O-ring occurs. The O-ring has a round seat regardless of pipe movements. The O-ring remains fixed in the seat and is always in contact with the pipe.
Ideal fitting is obtained by chamfering the pipe end to approximately 15, lubricating it with soft soap, Silicone or Vaseline. Do not use mineral oil or grease which can damage the rubber seal.
11
Screw-threaded joint
Screw-threaded joint without flange bushing
Available from 32 to 110 mm. Connection properties a) to be opened d) non-tension-resistant
Use Screw-threaded joints are used for assembly of various prefabricated parts when it is necessary to easily dismantle and also as the connection to sink traps and shower trays.
1 2 3 4
1. 2. 3. 4.
Connection properties a) to be opened c) tension-resistant Use Wherever there is the possibility that a pipe can be pulled out of a screw-threaded joint by axial tensile forces a flange bushing must be used to ensure that the connection will resist these forces. It is also recommended that a screwthreaded joint with flange bushing should be used when installing in floors or slabs, where the length of pipe between two connections (elbows, branches or sleeves) is longer than 2 metres.
The seal is pressed against the flange bushing and the thread.
12
Expansion socket
Available from 32 to 315 mm. Connection properties b) not to be opened d) non-tension-resistant Use An expansion socket is recommended between anchor brackets, particularly on installations assembled with rigid joints and where excessive thermal movement is anticipated. At least one expansion joint must be provided on vertical stacks running from floor to floor, long collector pipelines and before connecting to the buried drain pipework. Different conditions apply for underground installations. For this application field see page 48. Installation Can be used either vertically or horizontally. One advantage is the depth of the sleeve which makes the assembly of downpipes and mains easier, allowing both vertical and horizontal corrections (e.g. in level, and in the precise positioning of the direction of branches and elbows). A firm anchor bracket must always be located behind the expansion socket to avoid any movement of the socket in the event of expansion or contraction. The special shape of the seal allows the pipe to slide within the socket during expansion and contraction, ensuring that the connection remains perfectly watertight even under heavy hydraulic load.
The following conditions are important to ensure perfect and easy assembly of the sleeve: 1. Chamfering the inserted pipe end to approximate < ) 15.
Example: Insertion depth in an ambient temperature of 20C (Vertical assembly).
2. Check the scale on the outer surface of the expansion socket for insertion depth. 3. Mark the correct insertion depth on the pipe. 4. Lubricate the pipe end well with soft soap, Silicone or Vaseline. N.B. Do not use oil or grease which can damage the rubber seal. For more information see pages 22, 28, 43. A special expansion socket with stainless steel protection for the rubber seal can be used for heavy duty industrial and laboratory applications.
13
Flanged joint
Available from 50 to 315 mm. Connection properties a) to be opened c) tension-resistant Use Flanges are normally used as disconnectable joints for low pressure installations (industrial plant, pump connection, tanks and swimming pools). The flange connection system offers easy connection to existing iron and steel installations. As inspection access opening made by using a blind flange. Flanges are sintered, i.e. they are coated with polyethylene, and have standard dimensions (PN 3.2 PN 10).
Bolts
Flange adaptor
Seal
Flange adaptor
Loose flange
14
PE-Silent coupling
Available from 56 to 135 mm. Connection properties a) to be opened d) non tension resistant Use The application field of the coupling for HDPE-Silent is to connect HDPE-Silent pipes and fittings. The coupling enable an even inner surface of the connections and the noise requirements can be fulfilled.
Installation It is advisable to mark the inseration depth of HDPE Silent coupling.Do the pipe ends accordingly in order to ensure that they are not subject to tension. Support rings are not required for the Silent pipes and fittings.
PE-Silent coupling d (mm) 56 63 75 90 110 135 D (cm) 7.2 7.9 9.1 10.6 12.6 14.5 H (cm) 5.0 5.6 5.0 5.0 5.0 5.2 E (cm) 2.3 2.6 2.3 2.3 2.3 2.5 Art. No. 305.003.14.2 359.429.00.1 307.003.14.2 308.003.14.2 310.003.14.2 312.003.14.2
E H E
15
Laboratory sink
Geberit contraction sleeve For 125315 mm use two soft flames. Anchor bracket
h1 H
h K d
d di (mm) 50/ 60 73 80 90 100 56/ 60 73 80 63/ 73 80 90 75/ 80 90 100 90/110 110/125 140 125/150 160/195 230
H (cm) 30 27,5 28,5 30,5 31 26,5 24,5 24,5 26,5 24,5 26,5 25 24,5 15 17 16 18 18 20 30
K (cm) 17 17 17 17 17 14 14 14 14 14 14 12 12 12 2,5 1 1 5
Art. No. 152.651.16.1 152.197.16.1 152.198.16.1 152.652.16.1 152.653.16.1 152.654.16.1 152.149.16.1 152.150.16.1 152.657.16.1 152.658.16.1 152.659.16.1 152.152.16.1 152.151.16.1 152.661.16.1 366.550.16.1 367.551.16.1 367.550.16.1 368.550.16.1 369.550.16.1 369.551.16.1
16
Use The adapter clamps have multiple functions and can consequently be used as adapters to thirdparty materials as well as any other types of connection.
Installation It is necessary to insert an appropriate reinforcement ring into the ends of the HDPE-pipe first when these clamps are used as adapters to HDPE-pipes or for HDPE-pipe connections.
Important: If the joint from HDPE to steel cast iron or earthenware is made with a coupling, it has to be secured by an anchor bracket. Install the anchor bracket as close as possible to the coupling. (Maximum 15 cm)
1 Anchor bracket 2 Butt weld seam 3 Coupling 4 PE adaptor with reinforcement ring 5 Steel, cast iron, clay, fibre cement pipes
17
11/4"21/2
11/2"2"
56 + 75 mm
Threaded pip ends (for detail information see HDPE catalogue) Connection to: Male-thread Thread dia. 11/42" Geberit dia. 3250 mm Material HDPE, upon request also available with nut in brass
Male-thread
60 x 1/8
40 + 50 mm
HDPE
Female-thread
/21"
40 + 50 mm
Soldering / Welding (for detail information see HDPE catalogue) Connection to: Lead soldering Lead Pipe dia. 50/60 Geberit dia. 56 mm Material Brass with PE nut for
50/60
56 mm
Lead with PE nut for welding or soldering PVC for solvent cement joint + PE nut
PVC
50 + 63
56 mm
18
Water proofing
Wherever a water proof layer is required, the Geberit sealing for passages through walls or ceilings provides a perfect watertight seal between the HDPE pipe and the water proof membrane. Type 1: Resistit for connection with bitumn Type 2: PVC to be welded with PVC sheet Type 3: PE to be welded with Sarnafil FPO-A-foil For Geberit HDPE pipes 50, 56, 75, 110, 125 mm
50 cm
50 cm
Attention: Thermal expansion or contraction of the pipe is to be prevented. Maximum water pressure 0,1 bar.
Installation examples
Pipe Sealing
Waterproofing membrane
Expansion socket
Access pipe
19
Thermal movement
Physical principal: All materials expand as temperature increase. If the temperature falls, the material contracts.
= 0,2 mm/m K
Rule of thumb: t 50 = 10 mm/m
30C
1000 mm
5000 mm
80C
1010 mm
5050 mm
0C
994 mm
4970 mm
Pipe length
2. Given: Maximum temperature = 80C Installation temperature = 20C Temperature difference t = 60C Pipe length 3. Result: Thermal expansion L =4m
Determination of thermal expansion of HDPE (average linear expansion coefficient 0,2 mm/m K)
= 4,8 cm = 48 mm
20
Thermal movement
There are alternative methods of installing the Geberit HDPE Drainage System.
Deflection Leg
Expansion Socket
Rigid Fastening
21
Deflection leg
Compensating thermal expansion by deflection leg
+80C +20C 10C + 60 30 4000
DL
10 x L x
L = L x x t
Example: DL = 10 x
48 x 110 = 730
20
Outer- Aussen-
32 40
50-63
75 90
200
250
315
18
16
14
Lngennderung L des Dehnungsschenkels Linear expansion or contraction L in incm cm
12
10
6 4,8 4
20
40
60
73 80
100
120
140
160
180
200
220
240
260
Length deflection BS leg in Formel cm. Formula DL 10 x Lnge desof Biegeschenkels in DL cm aus BS = ca. 10 x = ca. LxD
L x
22
Expansion socket
The Geberit expansion socket is designed to counteract the variation in length due to thermal expansion and contraction of max. 6 m Geberit HDPE pipes.
Legend:
compensates the change of length provides an anchor point holdes anchor bracket in position
23
The distance L and the thrust forces P have to be taken in account, when selecting the diameter of the pipe nipple between mounting plate and bracket.
Thrust force P when in operation Thrust force P (kg) 5063 10 75 12 90 20 110 30 125 40 160 70 200 100 250 150 315 220
The thrust force P is the slide resistance between rubber seal and HDPE pipe. This force depends on the pipe diameter.
The table beside shows the correct pipe nipple diameter required depending on distance L to effectively withstand thrust force P.
125
1 " 2 1 " 2 1 " 2 1 " 2 1 " 2 1 " 2 3 " 4 3 " 4 3 " 4 3 " 4
160
1 " 2 1 " 2 3 " 4 3 " 4
200
3 " 4
315
5 " 4 5 " 4
1"
24
Guide brackets
The main purpose of guide brackets is to support the pipe and allow the axial movement caused by the effects of expansion and contraction.
Application:
For all fixations of Geberit HDPE pipes 40-315mm except for anchor brackets.
B.362.826/001
1
2"
2"
+
OR
B.362.837/001
M10
M10
M10
B.362.826/001
1"
1"
1"
2"
2"
1 B.362.826/001 2
"
25
E SB A
A SA
A G SA SB E SB
= Anchor Bracket = Guide Bracket = Spacing between anchor bracket and guide bracket = Spacing between guide brackets (see table below) = Expansion socket
max. 6 m G
G SA max. 15 x A
Spacing of guide brackets SB: The table indicates the maximum distance between guide brackets (G) for Geberit HDPE pipes.
Nominal outside diameter d (mm) 32 40 50 56 63 75 90 110 125 160 200 250 315
Spacing of brackets (SB) Horizontal Vertical (m) (m) 0,5 0,5 0,8 0,8 0,8 0,8 1,0 1,5 1,5 1,5 2,0 3,0 3,0 1,2 1,2 1,2 1,5 1,5 1,5 2,0 2,0 2,0 2,0 2,0 3,0 3,0
26
Rainwater downpipe Rainwater downpipes are generally not subjected to large temperature changes except for those outside of buildings exposed to sunlight. In vertical pipelines the distance between the brackets can be calculated approx. as follows: 15 x pipe diameter (max. distance see p. 26)
27
Rule:
Anchor point
G
A = Anchor bracket G = Guide bracket
A A
28
Rules: Maximum distance between Geberit HDPE expansion sockets 6 m Inserting depth depending on ambient temperature Anchor bracket directly on each Geberit HDPE expansion socket Guide brackets located along the collector pipeline (see page 26).
Example
max. 6 m
max. 6 m
max. 6 m
29
Rules: One Geberit HDPE expansion socket at each floor level One Geberit HDPE expansion socket at each branch One Geberit HDPE expansion socket at each change of direction Anchor bracket on each Geberit HDPE expansion socket.
Example
8,4 m
4,2 m
5,5 m
A
4,2 m
5,5 m
A A A
10 m 5m 8m 5
A
A = Anchor bracket G = Spacing between guide brackets in accordance to the rules (p. 25).
30
Principal: Any variation in length must be prevented by embedded fixed points (electroweld sleeve couplings, branches, bends or collar bushes) or by the provision of corresponding fixed point structures.
Anchor brackets for rigid fixings must be stronger than possible expansion or contraction forces (P) of the HDPE pipe (see table).
Ringsquare cm2 3,5 4,4 5,0 5,8 6,8 9,5 14 18,5 29,6 37,7 59,5 93,9
Column 1 (Normal installation) ca. + 20C bis + 90C force kg 85 105 125 140 170 240 350 460 740 940 1490 2350
Column 2 (Outside installation) ca. + 20C bis 20C force kg 221 277 315 365 428 598 882 1165 1865 2375 3750 5915
Example:
31
Rules: Anchor brackets must be stronger than the possible forces generated during thermal expansion or contraction of Geberit HDPE pipes. The examples of anchor brackets below show a typical rigid installation.
Ceiling or wall distance L (mm) 100 150 200 250 300 350 400 450 500 550 600
110 1"
5
125 W cm3
5 5
4"
1" 1"
5 5 5
4" 4" 2" 2" 9,3 11,2 13,0 9,0 10,1 15,0 16,8 17,7 20,5 22,4
4"
1
1" 1"
5 5 5 5 5
112"
Mounting plates
These plates are dimensioned on the basis of stresses which they have to withstand (force P). Plates with 1" to 2" sockets can be provided on request.
100
32
Principal: Any variation in length must be prevented by embedded fixed points in concrete (e. g. electroweld sleeve couplings, branches, bends or collar bushes) or by the provision of corresponding fixed point structures.
Embedding in concrete Basically Geberit HDPE material absorbs within itself thermal movement due to its high elasticity. However, in the case of large diameters (e.g. 315 mm) the forces P (resulting from expansion and contraction) are considerable. They must be absorbed by the embedded fixpoints alone, since cement/concrete will not adhere to HDPE pipework.
Branch equal
Reduced small branches of large pipe diameters must be secured by an additional anchor point (electroweld sleeve couplings or collar bushes) to prevent shearing off of the branch.
33
32160 mm
200315 mm
Cutting surface must stay clean, therefore do not touch the cutting surface with your hands!
The allowance for butt welds is approx. as big as the wall thickness of the pipe pipe diameter (mm) butt weld s (mm) 3275 3 90 4 110 5 125 5 160 7 200 7 250 8 315 10
34
Check temperature of the welding plate. Do not start with welding procedure before the green light is on.
mm 2
4 56 110
8 250
2
Indicative values for welding pressure 32 40 50 56 63 75 kg 5 6 7 8 9 10
Only press the pipe sections at the beginning against the welding plate. Then hold without pressure. Watch melting process carefully.
When melted bulge is about as big as a half of the wall thikness, take off both pipe sections simultaneously and quickly press them carefully together. Increase welding pressure until you attain necessary pressure (see table beside).
4
Too high pressure at the start of the welding procedure
Maintain the max. pressure until the welding seam has cooled (approx. 30 secs. down). Do not accelerate the cooling down by contact with cold objects or water.
35
Place pipe parts in the tension plates and fix them in a line.
1 cm 1 cm
90 50 110 63 75
125 160
UNIVERSAL 40 200 mm
90 0 50 11 63 75 12 5 0 16
90 50 110 63 75
125
160
MASC
MASC
Press pipe parts lightly against the planing disc and cut the ends until they are completly clean and plane. Check the cut faces by bringing them together.
TYP A 84 MEDI H. NR. MASC
MASC
Melt pipe ends with welding plate (green light on) until the melted bulge is about as big as half of the wall thickness depending on size of pipe.
90 0 50 11 63 75
12 5 16 0
MASC
Carefully press together both parts with necessary welding pressure (see scale). Do not release the locking handle before the complete cooling (approx. 40 secs.).
90 0 50 11 63 5 7
12 5 16 0
90 0 50 11 63 75 12 5 16 0
36
Dry, clean and scrape welding ends. Remove burr. Welding ends must remain dry during the whole welding process.
3.5 3,5cm cm
40160 mm
40160 mm
200315 mm
37
Geberit HDPE electro weld sleeve coupling (for pipes 40 160 mm)
1
000/191
B.500.000/192
3 cm 3 cm
Connect electrofusion machine, start welding procedure. Welding time approx. 7090 sec.
After the END indicator has turned on, remove the connection cable. The protruding yellow indicator indicates whether the welding process was performed correctly.
Right
If required for the sake of appearance, the electrical connector socket on 40160 mm dia. electrowelding sleeves can be removed after the end of installation work.
Wrong
Note: Basically, electroweld sleeve couplings should not be welded twice. However, in exceptional cases a repetition can be done, but wait at least 1 hour until the socket has completely cooled down.
38
Insert pipe or fitting ends into the electroweld sleeve coupling. Connect start switch cable. Press start button briefly. Working temperature: 10 oC - +40 oC Welding time: ca. 5 to 7 minures at 20 oC
Wait for at least 15 minutes after weld has been completed before removing the centering rings. Do not remove the plastic sheet insulation until the sleeve has completely cooled down. Note: The same sleeve coupling cannot be welded twice , since the built-in thermo fuses shut off automatically after the necessary welding temperature has been reached.
39
Prefabrication
Light weight easy to handle
Wide range of fittings, excellent tools and the light weight of Geberit HDPE = perfect performance for prefabrication.
Description
The good characteristics of the Geberit HDPE offer an easy way to prefabricate pipe assemblies. Through the butt welding technique, the pipes and fittings can be easily connected to make many big combinations. Complicated labour at the site is eliminated by the clean and easy organized work at the workshop. Afterwards, at the site the prefabricated combinations can be assembled very fast.
Advantages
Simplified work Easy time management Time saving Higher performance Higher quality Professional impression Short time at the site No loss of material
40
Prefabrication
Procedure 1
Measurements (Preparation)
Take measurements on site and mark the positions of all fixtures on the walls and floor.
70
60
60
70
55
16 14 10 170
Design drawing Prepare the design and detailed drawing. 2.1 Using the isometrics method
Part cc ./. total
1 2 3 4 5 6 7 8 9
110 63 63 63 .....
41
Prefabrication
3
Prepare pipes and fittings
B.600.000/020
Jointing possibilities
Shorten fitting
Prefabrication of assemblies
Weld pipes and fittings together with the Geberit welding machine MEDIA or UNIVERSAL.
Installation on site
The prefabricated assemblies can be connected on site with the electroweld sleeve coupling.
42
K
Nr at W . t .R ie se n Ku ns Ty ts Vo pe to "B W lt : A- ff- A Sc R 23 hw Y 0 ei " ss ap pa Dit Ba ra tin se te ge rst l (S ras ch se 45 w ei z)
43
Mounting instructions
1 2
8 cm
10,5 cm
at 0C (32F)
at 20C (68F)
Lubricate pipe end and rubber seal. Only use soft soap, Silicone or Vaseline. Do not use mineral oil or grease !
On the building site, protect the seal from ingress of dirt. Wrap a felt bandage around and secure with adhesive tape.
Please note:
The marking of the insertion depth and the assigned length of pipe on the expansion socket does not apply for buried pipes, unless the same temperature fluctuations as in the building drainage system are anticipated.
44
Underground drainage pipes of Geberit HDPE Not only has Geberit HDPE proven itself excellently for many years for drainage systems inside of buildings such as: soil and waste stacks vent pipes connection and branch pipes collector pipes but it is also suitable for underground applications as: ground pipes domestic drainage pipes
2. Resistance to chemicals Geberit HDPE provides the assurance of universal resistance to the greatly diversified types of chemical attack by the disposal water, as well as by external factors (acidic soils). 3. Flexibility Geberit HDPE is a flexible, operationally reliable drainage system, even in soils in which a certain degree of settling of ground must be anticipated. 4. Resistance to frost Geberit HDPE has proven itself excellently for many years in frost endangered soils such as in Scandinavia. It can be used in temperatures ranging down to 40. 5. Material As in domestic drainage systems, the quality of the material is the main criterion for underground
applications. In addition to the attack from the inside, the pipes are also subjected to attacks from outside. Geberit HDPE excellently stands up to all these requirements.
2 3 1
Criteria for underground drainage pipes 1. Tightness Environmental protection regulations do not permit leaking drainage pipes. Geberit HDPE is a reliable water drainage system which assures maximum dependability with regard to tightness.
1 Ground acids 2 Stray currents 3 Disposal water (with chemical and thermal attack) 4 No enter of roots
6. Friendly to the environment The Geberit HDPE drainage systems comply with environmental regulations.
45
Trench profiles
For all trenching work the local guidelines, standards and regulations must be observed.
Important for underground installation is correct laying of the pipe in the trench, as well as careful consolidation. B = Bedding The pipe must have a bedding of at least 100 mm. C = Consolidation Side fill to upper edge of pipe. P = Protective layer With trench profile 1A cover to above top edge of pipe over entire width of trench min. 300 mm HS = Safety height when using mechanical compactors: Vibration compactor 1,000 N HS = 0,4 m Vibration roller 3,000 N HS = 0,3 m Vibration roller 15,000 N HS = 0,5 m D = Consolidation stratum depth min. covering: In area of road 0,8 m Outside road area 0,5 m Max. covering: Up to 6 m without problem In cases of minimum coverings or heavy loading, measures such as load distribution plates or appropriate trench profiles are to be used. Traffic loads Heavy traffic Normal traffic
A
Profil V1A
20 cm
Profil U1A
20 cm
HS P C B
HS P C B
min. 60 cm
Profil U4A
Profil U4B
D
10 cm
10 cm
P = 9 tons P = 6 tons
B
Away from roads: always P = 3 tons Filling material Grain size Round gravel Broken material
0 = 30 mm 0 = 10 mm
46
U B
Trench The trench is to be dug as narrow as possible but not narrower than the pipe diameter + 40 cm. The floor of the trench must be level and free from rocks and loose clumps. Correct elevation and slope are also important.
B = Bedding Under normal soil conditions the trench is provided with a bedding layer of round gravel (grading up to 30 mm) or of broken material (grading up to 10 mm) of a thickness of approx. 100 mm. The bedding layer must be compacted and tamped. In certain cases it will be neccessary to reinforce the ground.
U = Underpinning After the pipe has been laid, recesses are to be provided for sockets and flanges so that the pipe is supported along its entire length. The underpinning is to be done with a tamping post or the like. It must be done very carefully. If several pipes are laid, make sure that the lowest one is fully covered before the one above is placed. The pipe must lay flat, and it must be installed with the correct slope.
C = Consolidation layer The material is to be filled in layers of approx. 100 mm thickness. Tamping can be done by stamping with the feet, or with a special tool. The purpose of this material is to help prevent the pipe from deforming, so that it must be compacted well on both sides at the same time .
HS P
1 Ground load and possible traffic load 2 Shoring pressure
P = Protective layer Now fill in a layer of the same material (must not contain rocks which could cause point loading of the pipe) of at least 300 cm. Attention: To prevent the pipe from rising the trench is to be finish-filled on the same day up to and including the protection layer.
HS = Safety margin height For the further filling the available material is to be used. The trench must not contain rocks which cannot be lifted by hand. As soon as permitted by the safety margin height, this compacting can be done by machine. The regulations and byelaws on the refilling of trenches are to be observed.
Distribution of ground pressure The ground pressure and ground load distribution are governed essentially by the compaction. For calculation the appropriate standards and the local building and safety regulations are to be observed.
47
Rigid installation
Rigid fixation
The rigid fixings must be stronger than the possible expansion or contraction forces of the HDPE pipe. Geberit pipes can be installed rigidly with relatively low effort, for which the following elements are required:
1 3
1 Concrete mound as an anchor point 2 Electroweld sleeve coupling 3 HDPE pipe
48
SL (socket length)
PL
4cm
ID
4 cm
Nominal outside diameter d (mm) 110 125 160 200 250 315
Socket Pipe length length SL PL (for t 30C) (mm) PL (m) 140 15 140 15 140 15 220 20 220 20 220 20
Fitting of the underground expansion socket in the installations Insert beveled pipe to maximum socket depth, mark and pull back 40 mm.
Prepare the pipe end The pipe end should be chamfered and lubricated with soap to ease inserting.
49
1 See page pipe 2 Settling 3 Insulation mat 4 HDPE pipe () 5 Foundation slab 6 See page lining DL = Deflection leg S = Insulation thickness S = expected settling
Expected settling S 20 40 mm 40 60 mm 60 80 mm
GeberitHDPE pipe 125 160 /200 315 125 160 /200 315 125 160 /200 315
D d H
50
Connection to manhole
Plastic pipes should only be connected with manholes by means of a special manhole sleeve. Since settling of ground has to be expected such a sleeve must have the same ideal characteristics as Geberit HDPE: it must assure tightness and at the same time flexibility. A rubber ring provides the flexible seal between sleeve and plastic pipe.
Open manhole
1 2 3 4 5
Concrete Manhole sleeve Geberit HDPE pipe Bench Anchor point if required
1 2
51
Frost protection
Geberit HDPE can be installed in temperatures down to 40C. However, to ensure water flow in the pipe an automatic-controlled heat trace can be fitted.
Heating tape
Piping Arrangement
Collector pipe (The inlet into the collector pipe is made with 135 Y-branch fittings).
52
Thermal movement
The following points must be observed Location of supports or piles Horizontal movement of the bridge on the supports Deflection of the bridge Swaying of the bridge The watertightness of the expansion socket (example 1) In the case of example 2 an expansion funnel is required to absorb the lateral movements.
Example 1
Example 2
Expansion socket
Expansion funnel
Fixing
The spacing of the guide brackets for HDPE piping is 1,5 m and may not be exceeded. With all plastic piping, the pipe bracket should have a minimum width of 60 mm, in order that the stresses due to the weight of the filled pipe is well distributed.
Guide bracket
53
Generally the Geberit HDPE product range is designed for water drainage systems. For the low pressure range, e. g. swimming pool, pipework through circulation pumps, Geberit has established maximum admissible stressing values for an endurance life of 10 years. All connections must be butt weld joints, electroweld sleeve couplings or flange joints. Suitable fitting range for low pressure application see page 4.
Pressure Temperature
The Geberit HDPE range of products can also be used for the discharge pipeline of a pump set, provided that the mechanical stress is low, only of short time and no thermal loaded medium (e.g. warm water) is pumped. When designing discharge pipelines for drainage pumps the following important points should be observed:
Vertical stack
Vertical stack
Collector pipe
Collector pipe
1. The discharge pipeline has to be installed higher than the lowest installed appliance by means of a pipe loop.
2. If the flow rate is smaller than 5 l/s the vertical fall section of the pipe loop has to be increased.
Vent 50/56 Vent 50/56 Vertical stack Vertical stack Side vent 50/56 Pumped pressure pipeline Pumped pressure pipeline
3. If the flow rate is above 5 l/s the vertical stack has to be vented with a ventilation pipe of at least 50 mm inside diameter.
4. Long horizontal collector pipes have to be vented. The minimal inner diameter of the vent pipe must be 57 mm or 2 dimensions smaller than the discharge pipe. The ventilation pipe must be higher than the total delivery head of the pump and must go above the roof.
54
The maximum level of the groundwater table has to be taken into account when designing Geberit HDPE pipelines in a groundwater area.
External pressure bar 4,8 2,5 1,4 0,82 0,64 0,36 0,18
Geberit HDPE pipes will withstand internal negative pressure according to the table above depending on the pipe diameter.
Geberit HDPE pipes are sometimes used as suction pipelines for pumpsets. The higher the suction lift is, the higher the negative pressure inside the pipeline. Important with such an installation is that the foot valve and strainer are not blocked. Foot valve and strainer of the suction pipeline should be kept free from debris, possible blockage could lead to additional pressure increase.
Internal negative pressure bar 1,0 1,0 1,0 0,82 0,64 0,36 0,18
55
Fire protection
Depending on the type of building different fire protection will be required (see local fire regulations for buildings).
Building parts
The requirments for building components are classified in fire resistant classes in order to maintain maximum integrity of the relevant wall, floor or ceiling. Fire resistance class F 30 F 60 F 90 F 120 F 180 Fire resistance time (minutes) 30 60 90 120 180 Material (example) 50 mm gipsum board 100 mm brick-wall 120 mm brick-wall 150 mm brick-wall 250 mm brick-wall
Gr. 10
102683_ZEI_000_00.EPS
STOP!
11 8 9 10
12 1
90 Min
STOP!
11 8 9 10
12 1
STOP!
11 8 9 10
12 1
2 3 4 5 6 7
56
5 6 7
90 Min
90 Min
2 3 4 5 6 7
2 3 4
Function:
Once the temperature in the room which is ablaze reaches a certain level, the intumescent material expands as a foam and closes off the cross-section of the pipe, therefore preventning (for a certain required length of time) the fire and smoke from spreading through the opening.
Housing with flexible fastening brackets Foaming firestop material Insulation against solid-borne noise Lock with locking ring
Ge
: ile mab tung ot feu iam e- inf ch up n bs co to no ra itif : e os men et Roh se sp rti anch et ev Di mpa gm ch sle klas Coidin an tion ds ec Leandm an e o ot st Br pr tancfuoc e ider sis l lass Fire n e rw rne de io ss ue de io ndsk kla icat Fe
se az ta as ic rs ds sif Classif ee stan clas Cl andw od tion r.: ion ec Brandm ot at ne s-N Br pr rtificsio Fire sung ce es aso deconc mer mer m Zul mro di m nu Numergsnusesber Nuurin ndel m Ke ke al nu ov God pr r: Ap
be
rit
Ro
hrs
ch
ott
90
90
Z-1
9.1
7-1
36
sd Fa uf ion ng icat ne Man ellu bruzio st faod de tum Her te pr da to Data ditie da ion uc ns at Da od tio ic h: Produk fabr rc Pr te of du rt Da tie r:: or: onl pa M al to dad do st er In ta te : af Mon on ret : Gemte d by .0 Mon alle .00 Inst
99 4.8 71
le
: atum
Identification plate
Measurements:
d1 (cm) 6.2 6.5 8.8 10.1 12.0 13.4 14.2 16.7 20.5
D (cm) 7.2 7.7 10.8 12.1 14.0 16.6 17.2 19.9 23.7
L (cm) 8.5 8.5 10.0 10.0 10.0 11.0 11.0 11.0 13.0
I1
3 3 4 4 4 5 5 6 7
365.815.00.1 366.815.00.1
l1 L
Installation
see page 58
370.815.00.1
57
Gr. 10
Gr. 10
ceiling
wall
D B C
D C B C
D C
A (cm) 9.0 9.0 10.5 11.5 12.5 13.5 14.0 15.0 17.0
B (cm) 9.0 9.0 10.5 11.5 12.5 13.5 14.0 15.0 17.0
C (cm) 17.0 17.5 20.5 22.0 24.0 26.5 27.5 20.0 34.0
A (cm) 4.0 4.5 10.5 11.5 12.5 13.5 14.0 15.0 17.0
B (cm) 4.0 4.5 6.0 7.0 8.0 9.0 9.5 10.5 13.0
C (cm) 9.0 9.5 12.0 13.0 15.0 18.0 19.0 22.0 26.0
58
Mechanical characteristics, measured under standard climatic conditions 23C, 50% relative air humidity** Tensile strength Elongation at yield stress Ultimate tensile strength Elongation at break Limit bending strength Torsional rigidity Bending creep modulus 1 minute value Indentation hardness 30 second value Shore hardness D Impact strength Impact strength at +23C and 40C Thermal characteristics Crystallite melting range Mean linear expansion coefficient between 20 and 90C Heat conductivity at 20C C K1 W mK Polarisation microscope DIN 52328; ASTM D 696 DIN 52612 sheet method Microtome section 50 mm x 4 mm x 4 mm Plate, 8 mm Injection, moulded 127...131 1,7104 0,43 N/mm2 % N/mm2 % N/mm2 N/mm2 N/mm2 N/mm2 mJ/mm2 mJ/mm2 DIN 53455. ISO/ R 527; test velocity 125 mm/min DIN 53452 DIN 53447 Bending creep test b 3 N/mm2 DIN 53456 Test strength 132, 4N DIN 53505 DIN 53453 DIN 53453 Test specimen 3 with measurements in the ratio 1:4 Standard small bar injection moulded 60 mm x 6,35 mm x 2 mm 120 mm x 20 mm x 6 mm Sheet, 4 mm Sheet, 4 mm Standard small bar, moulded*** Standard small bar, injection moulded 22 15 32 > 800 28 240 800 40 60 15
Electrical properties, measured under standard climatic conditions of 23C, 50% relative air humidity Specific transmission resistance Surface resistance Electric strength Dielectric index r, (relative dielectric constant) at 2 106Hz Dielectric loss factor tan at 50 Hz cm kV/cm DIN 53482 VDE 0303 Part 3 DIN 53482 VDE 0303 Part 3 DIN 53481 VDE 0303 Part 2 DIN 53483, VDE 0303 Part 4 (immersion method) DIN 53483, VDE 0303 Part 4 DIN 53 480 VDE 0303 Part 1 DIN 53484 VDE 0303, Part 5 The values given above relate exclusively to the corresponding test methods or test specimens. Results which are obtained with specimens taken from pipes may not agree. Foil, 0,2 mm Sheet, 1 mm Foil, 0,2 mm >1016 >1013 700
Track resistance Arc resistance In a number of countries, a tensile test is carried out on a test specimen taken in longitudinal (or transversed) direction of the pipe, e.g. in Great Britain according to BS 3284. The values thereby obtained do not necessarily need to agree with those given in the table, which applies especially for the elongation at break.
Sheet 3 mm 120 mm x 120 mm x 10 mm In contrast with injection, moulded specimens are free from flow orientations. This strongly influences the test result. Measurement with moulded bars is therefore preferred.
KA 3c KC > 600 L4
59
PE environmental loads relate to the fields of manufacture and disposal. In addition to the raw material crude oil, energy is used for the preparation of the plastic granulate and in the manufacture of the products.
PE is the perfect material for drainage systems from an ecological point of view. It has a long life span, no toxic gases rises from incineration (e. g. hydrochloric acid HCL from PVC) during disposal. It consumes much smaller quantities of energy during fabrication process and transport than steel, cast iron or copper pipes.
Fore more information about environment and sustainability, please order our report Life Cycle Assessment Drainage pipes for buildings
60
4000
3000
2000
1000
0 Cast iron 50% recycled tin plate Cast iron 100% recycled tin plate PVC ABS HD-PE
61
Tempered 10 mm per meter (licence Geberit International AG) The safest way of avoiding the inevitable heat reserves (shortening of dimensions) after heat load in the plastic pipe, is to take preventative measures during manufacture. Geberit HDPE pipes are therefore stored in hot water baths after manufacture. This process increases the safety of the joints, as there is no chance of joints pulling apart later due to shortening of length.
Resistance to cold When Geberit HDPE parts are filled with water and then freeze, they stretch elastically as the ice expands. Once the ice melts, they resume their original shape, remaining completely intact and undamaged.
Flexibility The flexibility of the piping material can be the main criterion in certain buildings or on bridges, especially when pipes have to pass through expansion joints or are in buildings, which are subject to traffic vibration.
Melt-flow index 0,4 0,5 g/10 min. This describes the working properties of the pipe and at the same time gives information on the molecular weight, which is crucial for a number of raw material properties. The smaller the melt-flow index, the higher the molecular weight and thus the pipes resistance to stress corrosion.
Heat conductivity 0,43 W/m K HDPE is a bad heat conductor; for this reason the pipe does not become completely warmed through when heat loaded for a short period. Heat loss is about 90% less, for instance, than a similar copper pipe.
62
Resistance to abrasion Drainage systems are increasingly becoming hidden refuse chutes. A pipes resistance to abrasion is a particularly important factor in branch pipes, soil stacks and ground pipes. HDPE is highly resistant to abrasion; its extra thick walls offer additional protection.
Heat expansion 0,17 mm/m K Heat expansion of HDPE is relatively high. As a rule of thumb, for every 50C increase in temperature, an expansion of 10 mm of linear meter of pipe can be anticipated.
Resistance to hot water Geberit HDPE can be safely used as waste pipe with no mechanical load, up to 80C. Temperatures of up to 100C for short periods (e.g. surges of steam) are permissible.
Resistance to impact Geberit HDPE is unbreakable at room temperature. Its resistance to impact is very high even at extremely low temperatures (down to approx. 40C) and thus meets the requirements for outlet pipes.
Condensate Geberit HDPE is a poor conductor of heat. No condensate should form during short periods of undercooling.
63
Non-conductive Plastics have an excellent reputation as insulators in the electronics industry. HDPE cable protection ducts, cast resins, insulating paint etc.
Sealing material Although the chemical resistance of the seal does not equal that of HDPE, there is no risk of the seal being destroyed, because the rubber ring is installed under compression on all sides and therefore cannot swell. In addition, the wetting factor of the rubber ring in the joint is very low. Many years of experience have shown that the sealing material can endure even the harshest conditions. NB: Such conditions do not occur in drainage pipes. Free halogens (chlorine, bromine etc.) cause halogenised polyethylene and hydrogen halide to form at room temperature. The halogenised polyethylene has different physical and chemical properties from the original hydrocarbon, but the polymer is not destroyed. Geberit HDPE should therefore not be used at all in areas where free halogens are produced or used. The only criteria to be observed here are the purpose for which the pipe is intended and the concentration of halogens. Solar radiation Geberit HDPE pipes are protected against ageing and embrittlement caused by UV rays by the addition of approximately 2% soot.
Noise HDPE is a soft material with a low E-modulus. HDPE limits solid-borne conduction, but airborne noise should be insulated. This can be done by means of the duct wall, HDPE Silent or Geberit Isol.
Chemical resistance Because of its paraffinic structure, Geberit HDPE is highly resistant to chemicals. Its resistance can be summarized briefly as follows: Geberit HDPE is insoluble in all inorganic and organic solutions at 20C. Geberit HDPE is only soluble in aliphatic and aromatic carbons and their chlorinating products at over 90C. The material will be attacked by heavily oxidized media (conc. HN03, conc. H2 S04) when exposed over long periods at room temperature.
64
Protection against blockages HDPEs water-repelling properties are highly beneficial in this regard. Rapid outflow of water Prevention of deposits
Welding temperature Thermoplasts are processed with a high level of energy efficiency. The temperatures required are relatively low in comparison with metals. The welding temperature for HDPE is approximately 230C. Simple tools allow for easy processing.
Non-toxic Plastics are well suited for use in the food industry as packaging material, containers, bottles etc. Geberit HDPE pipes are used for milk transportation lines in mountain areas and in the food canning and packing industry.
Scope of use Geberit HDPE pipes are designed for drainage systems. Their use in low-pressure areas (swimming pools, transportation lines etc.) is subject to a maximum pressure load of 15 m Water Column (1,5 bar) and a temperature of 30C (10 years). There is also a certain range of moulded fittings.
Painting Geberit HDPE is not suitable for painting. Its water repellent properties and the flexibility of the material both have a negative impact on paint. If painting is unavoidable, the paint product to be used should be tested for compatibility with the HDPE.
65
As a result of manufacturing, the molecule chains are stretched and than cooled down from about 230C to 40C. This enormous drop in temperature results in tensile stresses which are frozen in by the cooling down process.
When hot water flows through a streched pipe or the pipe is heated up by doing a welding joint, e.g. with an electroweld sleeve coupling, the expanded molecules relax and return to their normal state. The pipe becomes shorter.
Without tempering, shortening of dimensions can create gaps between pipe and fitting, pipes can be pulled apart high risk of leakage!
66
The safest way of avoiding the inevitable heat shortening of dimensions after heat load in the plastic pipe is to take preventative measures (Tempering) during manufacture. Geberit pipes are therefore stored in a hot water bath after manufacture, this allows the expanded molecules to relax and return to their normal state = No stresses on Geberit pipes.
Tempering of Geberit pipes reduces mechanical stress on joints and fixations. Through this process even the high precision requirements for electroweld sleeve couplings can be met.
Length = 5000 mm
After manufacture
67
increasingly acid
increasingly alkaline
7
NEUTRAL
10
11
12
13
14
very acid
slightly acid
slightly alkaline
very alkaline
HDPE . . .
. . . can be used safely with pH values from 0 to 14. . . . is therefore suitable, for example, for use with effluents containing over 30% hydrochloric acid.
pH values of some drinks and cleaning agents pH-value 2,8 3,5 2,2 2,8 9 13 2 4
Cola drinks Apple juice Tartaric acid Citric acid Washing solutions Toilet cleaner
68
69
Geberit HDP
Proport. Performance % 20 40 60
The suitability of the pipe wall material must be checked in each individual case; if necessary, further tests should be carried out. Not resistant The pipe wall material is generally regarded as being unsuitable. The following symbols and abbreviations are used to indicate the composition of the flow substances: % L Percentages refer to mass proportions in %. Aqueous solution, mass proportion > 10%.
VL Aqueous solution, mass proportion <= 10%. GL Aqueous solution saturated at 20C. TR Chemical is at least technically pure. H S G Normal commercial composition. Traces < 0,1% Usual mass proportion of any saturated solution or dilution.
Data is based on immersion tests without mechanical load and reflects current levels of knowledge. No claims under guarantee may be made on the basis of this information.
The following data is required for a declaration of chemical resistance: Corrosion medium, composition (chemical description), DIN safety data sheet Temperature Proportion (concentration) Information on reaction time, frequency, flow quantity Other flow media
A Acetic aldehyde Acetic aldehyde Acetic aldehyde+acetic acid Acetanhydride (acetic anhydride) Acetamide Acetanhydride Acetic acid Acetic acid Acetic acid butyl ester Acetic ether (ethylacetate) Aceto-acetic acid Acetone Acetone Acetophenone Acetylene Acronal dispersions Acronal solutions Acrylonitrile Acrylic acid-emulsions Acrylic acid ethylester Activine (chloramine 1%) Adipinic acid Adipinis acid ester Allyl acetate Allyl alcohol Allyl chloride Alum (potassium aluminium sulphate) Aluminium chloride Aluminium chloride Aluminium chloride, solid Aluminium fluoride Aluminium hydroxide Aluminium metaphosphate Aluminium sulphate Aluminium sulphate, solid Amidosulphates (amido-sulphonic acid salts) Amido-sulphonicacid Amino acids Ammonia, gaseous Ammonia, liquid Ammonia solution (ammonium hydroxide) Ammonium acetate Ammonium carbonate and bicarbonate of ammonium Ammonium carbonate Ammonium chloride (sal-ammoniac) Ammonium dihydrogen phosphate Ammonium fluoride Ammonium hydrosulphide Ammonium metaphosphate Ammonium nitrate Ammonium phosphate Ammonium sulphate Amonium sulphide Ammonium thiocyanate Amyl acetate Amyl alcohol Amyl chloride Amyl phthalate Anilin (phenylamine)
96 any VL GL GL
any
any any 100 100 any any GL any any GL L any any any any any TR TR 100 GL
70
Geberit HDPE
Proport. Performance at % 20 40 60C
Anilin chlorhydrate any Anise oil TR Anone (cyclohexanone) TR Anthraquinone sulphonic acid 1 Antifomine (benzaldoxime) 2 Anti-freeze H Antimonious trichloride, anhydrous Antimonious trichloride 90 Antimonious pentachloride Apple juice H Apple wine H Aqua regia TR Arklone (= reon, frigen) (Chloro fluorcarbon CFC) 100 Aromativ oils Arsenic any Arsenic acid anhydride Ascorbic acid (vitamin C) Asphalt B Barium carbonate chem. precipitated 98/99% Barium hydroxide Barium salts Battery acid (sulphuric acid,~34%) Baysilon separating agent Beef fat Beef suet Beeswax Beer Beer colouring Benzaldehyde Benzaldehyde in isopropyl alcohol Benzene Benzaldoxime (antiformine) Benzene/benzol mixture 80/20 Benzene sulfonic acid Benzoic acid Benzoyl chloride Benzyl alcohol Benzyl chloride Bichromate sulphuric acid (chromic acid/sulphuric acid) Bismuth nitrate, acqueous Bismuth salts Bisulfite solution Bitumen Bleach solution with 12,5% active chlorine Bone oil Borax (sisodic tetraborate) Boric acid Boric acid methyl ester Boric trifluoride Brake fluid Brandy Bromic acid Bromin, liquid and gaseous Bromochloromethane Butadiene Butadiene Butandial Butane, gaseous Butanol
Butanon Butantriol Butindial Butoxyl (methosybutylacetate) Butter Buttermilk Butyl acetate Butyl acrylate Butyl alcohol Butyl benzylphthalate Butylene, liquid Butylene glycol Butylene phenol Butylene phenol, p-tertiary Butyric acid C Calcium carbide Calcim carbonate Calcium chloride Calcium hydroxide (lime) Calcium hypochlorite (chlorinated lime) Calcium nitrate Calcium oxide (powder) Calcium phosphate Calcium sulphate (gypsum) Calgon (sodium hexametaphosphate) Campher Campher oil Cane sugar Caoutchouc dispersions (Latex) Carbazol Carbol (phenol) Carbolic acid (phenol) Carbon bisulphide Carbon dioxide (soda water) Carbon tetrachloride Castor oil Caustic ammonia (ammonium hydroxide) Caustic potash solution Caustic soda (sodium hydroxide) CD 2 up to 5% CD 3 up to 5% Cetyl alcohol Chloracetic acid Chloral hydrate Chloramine T Chloramine T Chloric acid Chloric acid Chloric acid Chlorinated carbon dioxide ester Chlorinated lime (calcium hypochlorite) Chlorinated paraffin Chlorine Chlorine Chlorine, gaseous, damp Chlorine, gaseous, damp Chlorine, gaseous, damp Chlorine, gaseous, dry Chlorine, liquid Chloroacetic acid ethyl ester Chloroacetic acid methyl ester
any 100
TR
TR TR TR TR any
H H H any 1 TR 2
GL any GL GL 50
GL any TR TR
any TR TR
TR any
any any
71
Geberit HDPE
Proport. Performance at % 20 40 60C
Chlorobenzol Chloroform Chloromethyl, gaseous Chlorsulphonic acid Chromanode mud Chromic acid Chromic acid Chromic acid/sulphuric acid/water, 50/15/35 Chromic alum Chromous salt Chromium sulphuric acid Chromium sulphuric acid Chromium trioxide Citraconic acid Citrate Citric acid Citronaldehyde Citrus juices Clophene (polychlorinated biphenyls PCB) Coal tar oil Coca Cola Cocoa Coconut oil alcohol Coconut oil Cod liver oil Coffee Cognac Cola conzentrate Compressed air containing oil Cooking oil, vegetable and animal Copper chloride Copper cyanide Copper fluoride Copper nitrate Copper nitrate Copper salts Copper sulphate Corn oil Corsolin (disinfectant; chlorophenol soap solution) Cover paint Creosote Cresol Cresol Crotonaldehydo Crude oil Crystalline acid Crystal oil (solvent naphtha) Cumarone resin Cyclanone Cyclanone Cyclohexane Cyclohexanol Cyclohexanone (Anone) D Decahydronaphtalene (Decalin) Dessicator oil Detergents Developing solutions (photographic) Dextrine
TR TR TR TR 20 50
100
G TR TR G
GL any 30 GL GL any TR VL
Dextrose (glucose, grape sugar) Diamin hydrate Diethyl ether (ether, ethyl ether) Diethylene glycol Di-2-ethylhexylphthalate (DOP) Diethyl ketone 1,2-Dibromoethane Dibuthyl ether Dibutylphthalate Dibutylsebacate Dichlorethylene Dichlorbenzene Dichloracetic acid Dichloracetic acid Dichloracetic acid methyl ester Dichlorodiphenyltrichloromethane (DDT, powder) Dichlorpropane Dichlorpropene Dielectric (transformer oil) Diesel fuel Diglycolic acid Diglycolic acid Dihexylphthalate Di-isobutylketone Di-isopropylether Dimethylamine Dimethylformamide Dimethylsulfoxide Disodic phosphate Disodic sulphate Disodic tetraborate (Borax) Dinonylphtalate Dioctylphtalate Dioxan Diphenylamine Diphenyloxide Dispersions Distilled oils Dodecyl benzene sulphonic acid Dry potash (potassium hydroxide) Dyes E Electrolytecbaths for electroplating Emulsifying agents Emulsifying agents (Tenside) Emulsionen (photographic) Epichlorohydrin Epichlorohydrin Epsom salts (magnesium sulphate) Ethane Ethanol (rectified spirit, ethyl alcohol, wine spirit) Ether (sulphuric ether, diethyl ether) Ethyl acetate Ethyl alcohol (rectified spirit, ethyl alcohol, wine spirit) Ethyl alcohol, denatured (2% Toluol) Ethyl alcohol (fermation mash) Ethyl alcohol + acetic acid (fermentation mix) Ethyl benzene
any TR TR
TR TR TR TR TR 50 TR TR
100 H 30 GL TR TR TR TR
any TR TR TR
50
90 100 TR TR TR L H TR TR TR
any H
any
96 TR TR 96 96 G G TR
TR
18
72
Geberit HDPE
Proport. Performance at % 20 40 60C
Ethyl chloride Ethylene Ethylene chloride Ethylene chlorohydrin Ethylene dichloride (Ethylene chloride) Ethylene diamine Ethylene diamin tetra-acetic acid Ethylene bromide Ethylene chloride (dichlorethylene) Ethylene glycol Ethylene oxide, gaseous Ethylene oxide, liquid Ethyl ether (Ether, Diethylether) 2-ethylhexanol Ester, alphatic Exaust gases, containing hydrogen fluoride containing hydrogen fluoride containing carbon dioxide containing carbon monoxide containing nitric oxide containing nitric oxide containing nitric oxide containing oleum containing oleum containing hydrochloric acid containing sulphur dioxide containing sulphuric acid containing sulphuric acid (damp) containing sulphur trioxide (oleum) containing sulphur trioxide (oleum) F Fatty alcohol Fatty alcohol sulphonate (cyclanone) Fatty alcohol sulphonate Fatty acids (technically pure) Fatty acids Fatty acid amides Fermentation mash (ethyl alcohol) Fermentation mix (ethyl alcohol + acetic acid) Ferrous chloride Ferric chloride Ferric nitrate Ferric sulphate Ferrous sulphate Fertilizer salts Fir needle oil Fixative salt (sodium thiosulphate) Floor polish Flowers of sulphur (elementary sulphur in powder form) Fluoride Fluobolic acid Formaldehyde (formalin) Formalin (acqueous formaldehyde) Formamide Formic acid Formic acid Formic acid Formic acid Freon 12 Fruit juices
TR TR TR TR
Fruit juices, unfermented Fruit juices, fermented Fruit wine Fruit pulp Fruit tree carbolineum Fuel oil Furfur alcohol Furfurol Furniture polish G Gas liquor Gelatine Gin Gypsum (calcium sulphate) Glaubers salt (sodium sulphate) Glucose (grape sugar, dextrose) Glue Glutine glue Glycerin Glycerin chlorohydrine Glycocoll Glycol Glycolic acid Glycolic acid Glycolic acid butyl ester Glysantine Grape sugar (glucose, dextrose) Gravy H Halothane Heptane n-Heptane Hexadecanol (cetyl alcohol) Hexafluorosilicic acid Hexamine Hexane n-Hexane Hexantriol Hchst drilling agent Honey Hydraulic fluid Hydrazine hydroxide Hydroammonium sulphate (ammonium hydrosulphate) Hydrobromic acid Hydrochloric acid Hydrochloric gas, dry+damp Hydrocyanic acid (prussic acid) Hydrocyanic acid Hydrofluoric acid Hydrofluoric acid Hydrogen Hydrogen bromine, gaseous Hydrogen peroxide Hydrogen peroxide Hydrogen peroxide Hydrogen sulphide Hydrogen sulphide, gaseous Hydrogen superoxyde Hydrogen superoxyde Hydroquinone
H H H TR
any
TR TR 32 any TR TR TR
L any 50 any TR 10 TR 50 70 TR TR 10 30 90 GL TR 30 90 L
TR TR 40 40 TR 10 50 85 TR 100 G
73
Geberit HDPE
Proport. Performance at % 20 40 60C
Hydrosilicofluoric acid Hydrosilicofluoric acid Hydrosulphite Hydroxylamine sulphate Hypochlorous acid Hypophosphite I Ink Interlacing agent Insecticides lodine-potassium iodide (3% iodine) Isobutyl alcohol Iso-octane Isopropanol (isopropyl alcohol) Isopropyl acetate Isopropyl ether Isobutylaldehyde (technically pure) Iron (Ill) ammonium sulphate Iron salts J Jam Javel water (sodium hypochlorite) Jelly K Kaolin, washed/ground Kerosine (petroleum) Ketone Kitchen salt, saturated (sole) L Lactose Lanolin Lactic acid Latex (caotchouc dispersions) Lead (Il) acetate Lemon aroma Lemon juice Lemon zest Lime (calcium hydroxide) Lime water Linseed oil Lighting gas, benzole free Levoxin 15 (diamin hydrate) Liquid soap Liquor Lemonade Lipoids (lecithin, emulsifiers) Lithium bromide Lixtone SO Lixtone TS 803/M Lubricant oils Lubricant soap Lysoform (disinfectant; acqueous solution var. higher aldehydes) Lysol
32 any VL 12 any
5 G
H 5
any TR 100
TR any any
GL TR H TR H any
VL
M Magnesium carbonate Magnesium chloride Magnesium fluorsilicate Magnesium hydroxide Magnesium iodide Magnesium salts Magnesium sulphate Maleic acid Malic acid Malic acid Malic acid Manganese sulphate Margarine Maschine oil Mashed potato Mashes Mayonnaise Molasses Molasses aroma Menthol Mercuric chloride Mercuric salts Mercury Mersol D (mixture of higher paraffin sulfonic acid chlorides) Metallic mordant Metallic soap Methacrylic acid Methane, gaseous Methanol (methyl alcohol) Methoxybutanol Methoxybutyl acetate (butoxyl) Methyl alcohol (methanol) Methyl acetate Methyl acrylate Methylamine Methylbenzene (toluol) Methyl bromide, gaseous Methyl chloride Methylcyclohexane Methylene chloride Methyl ethyl ketone Methyl glycol Methyl isobutylketone Methyl metacrylate 4-Methyl-2-pentanol Methyl propylketon n-Methyl pyrrolidone Methylsalicylate (Salicylic acid methyl ester) Methyl sulphuric acid Methyl sulphuric acid Metol (4-methyl-amino-phenosulphate) (photographic-developer) Milk Mineral oil, without additives Mineral oil, free of aromatic compounds Mineral water Mixed acid I (sulphuric acid/nitric acid/water) 48/49/ 3 50/50/ 0 10/87/ 3
TR
H TR TR GL TR 100
TR any TR any TR 32 TR TR TR TR TR
50 100 VL H H H
74
Geberit HDPE
Proport. Performance at % 20 40 60C
50/31/19 50/33/17 10/20/70 Mixed acid ll (sulphuric acid/phosphoric acid/water) 30/60/10 Monochlorbenzene Monochloracetic acid ethyl ester Monochloracetic acid methyl ester Monoethylamine Morpholine Motor oil Mowilith-dispersions N Nail varnish Nail varnish remover Naphtha Naphthalin Natural gas Nekal BX (interlacing agent; sodium salts var. isopropyl naphthaline sulphonic acids) Nickel chloride Nickel nitrate Nickel salts Nickel sulphate Nicotine Nicotinic acid Nitric acid Nitric acid Nitric acid Nitric acid Nitric acid Nitric acid Nitrochloroform Nitrobenzene Nitrocellulose Nitrogen (gaseous) Nitrous gases Nitrotoluols Nolan stop-off lacquer (dangerous substance) Nolan thinner (dangerous substance) Nonyl alcohol (nonanol) Nut oil O Octyl cresol Oleic acid Oil of cloves Oils, distilled Oils, mineral, without additives Oils, mineral, free of aromatic compounds Oils, vegetable and mineral Oleum, 10% SO3 Oleum vapours (sulphur trioxid) Oleum vapours Oleic acid O-nitrotuluol Optical whiteners Orange juice Orange zest Orotol Oxalic acid
TR
GL
TR
H H 5 TR TR TR
GL
P P 3 Galvaclean 20 (dangerous substance) P 3 Galvaclean 42 = P 3 S (dangerous substance) P 3 Galvaclean 44 (dangerous substance) P 3 Galvaclean 45 (dangerous substance) P 3 Galvaclean 65 (dangerous substance) P 3 Manuvo hand cleaner (dangerous substance) P 3 Saxim (dangerous substance) P 3 Standard (dangerous substance) P 3 7221 (dangerous substance) Palmityl acid Palmityl alcohol Palm kernel oil Palm oil H Palm kernel oil acid TR Paraffin 100 Paraffin emulsion H Paraffin oil TR Paraformaldehyde Parfume Paris inert oxyd (dangerous substance) Peanut oil Pectin GL Pentanol TR Peppermint oil TR Perchlorethylene TR Perchloric acid 20 Perchloric acid 50 Perchloric acid 70 Perhydrol (hydrogen peroxide, acqueous solution) 40 Petroleum ether TR Petroleum (kerosene) TR Petroleum spirit (light petrol, free from aromatic compounds) 100 Petrol, regular grade H Photographic emulsion H Photographic developer H Photographic fixer bath H Pineapple juice Pine needle oil Phenol (carbolic acid) any Phenol resin mould substances Phenylamine (aniline) GL Phenylethyl alcohol Phenylhydrazine TR Phenylhydrazine hydrochloride Phenyl sulphonat (Sodium dodecylbenzene sulphonate) Phosgene, gaseous TR Phosgene, liquid TR Phosphates any Phosphoroxichloride Phosphorpentoxide 100 Phosphoric acid 50 Phosphoric acid 95 Phosphortrichloride TR Phosphoryl chloride TR
75
Geberit HDPE
Proport. Performance at % 20 40 60C
Phtalic acid Phtalic acid Phtalic acid ester Picric acid Picric acid Polychlorinated biphenyl (PCB) Polyester resins Polyester softeners Polyglycols Pork dripping Potash (potassium carbonate) Potassium ferrocyanide, pot. ferricyanide Potassium ferricyanide and potassium ferrocyanide Potassium cyanide Potassium ammonium sulphate (alum) Potassium carbonate Potassium bichromate (potassium dichromate) Potassium bisulphate Potassium borate Potassium borate Potassium bromate Potassium bromate Potassium bromide Potassium cadmium cyanide Potassium carbonate (potash) Potassium chlorate Potassium chloride Potassium chromate Potassium chromate Potassium cyanide Potassium dichromate (potassium bichromate) Potassium ferricyanide Potassium fluoride Potassium hexacyano ferrate Potassium hydroxide (caustic potash) Potassium iodide Potassium nitrate Potassium perborate Potassium perchlorate Potassium permanganate Potassium permanganate Potassium persulphate Potassium phosphate Potassium sulphate Potassium sulphite Potassium sulphite Potassium tetracyanocuprate Potassium thiosulphate Propane, liquid Propane, gaseous i-Propanol n-Propanol (n-propyl alcohol) Propargyl alcohol Propionic acid Propionic acid Propylene chloride Propylene glycol Propylene oxide Prussic acid
50 GL 1 GL
Prussic acid (hydrocyanic acid) Pseudocumol Pyridine Q Quinine R Ratak Resit 65 (Fuchs) Rectified spirit (ethanol, ethyl alcohol, spirit of wine) Rinsing agents Roaster gases, dry Rum
10 TR
96 H any 40
any any any any any any any any 10 GL VL GL any any any any any 40 GL any any any any any 50 any any GL 20 GL any any any L
TR TR TR TR 7 50 TR 100 TR TR TR
S Saccharic acid GL Sagrotan (disinfection, chlorophenol soap solution) VL Sagrotan Salicylic acid GL Salicylic acid methyl ester (methylsalicylate) Sal-ammoniac (ammonium chloride) any Salt (sodium chloride) any Saturated steam concentrate Seawater H Separating agent Sewage Shampoo Shoe cream Silicic acid any Silicofluoric acid 40 Silver nitrate any Silver salts GL Silicon oil TR Soda (sodium carbonate) any Soap solution any Soda Iye (sodium hydroxide, caustic soda) any Soda water (carbon dioxide) any Sodium acetate any Sodium aluminium sulphate Sodium benzoate GL Sodium benzoate 36 Sodium bicarbonate (sodium hydrogen carbonate) GL Sodium bisulphate (sodium hydrogen sulphate) GL Sodium bisulphitt (sodium hydrogen sulphite, sodium disulphite) any Sodium borate Sodium bromate L Sodium bromide L Sodium carbonate (soda) any Sodium chlorate any Sodium chloride (salt) any Sodium chlorite VL Sodium chlorite 20 Sodium chlorite bleaches H Sodium chromate VL Sodium cyanide GL Sodium dichromate GL Sodium disulphite (sodium bisulphite) any Sodium dithionite VL Sodium dodecyl benzene sulphonate (phenyl sulphonate) Sodium ferricyanide
76
Geberit HDPE
Proport. Performance at % 20 40 60C
Sodium fluoride Sodium hexacyanoferrate Sodium hydrogen carbonate (sodium bicarbonate) Sodium hydrogen sulphate (sodium bisulphate) Sodium hydrogen sulphite (sodium bisulphite) Sodium hydroxide (caustic soda) Sodium hypochlorite (Javel water) Sodium hypochlorite Sodium iodide Sodium copper cyanide Sodium nitrate Sodium nitrite Sodium oxalate Sodium perborate Sodium perchlorate Sodium peroxide Sodium peroxide Sodium peroxodisulphate (sodium persulphate) Sodium phosphate Sodium silicate (water glass) Sodium sulphate (Glaubers salt) Sodium sulphide Sodium sulphite Sodium thiosulphate (fixative salt) Softeners Soya oil Spermaceti Sperm oil alcohol (mixture of higher oil alcohols) Spindle oil Spin bath acid, containing CS2 Spirits Stain remover Stannous (Il) chloride Starch Starch syrup Stearic acid Stellhefen flavouring (aqueous solution of maltose and dextrines) Styrol Succinic acid Suet Sugar beet juice Sugar solutions Sugar syrup Sulphate Sulphur Sulphur dichloride Sulphur dioxide Sulphur dioxide, gaseous, dry and damp Sulphur dioxide, liquid Sulphurated potash (potassium polysulphide) Sulphuric acid Sulphuric acid Sulphuric acid Sulphur sodium (sodium sulphide) Sulphur trioxide (oleum vapours) Sulphur trioxide Sulphurous acid
GL GL GL 10 any any 5 12,5 L any any any GL any 10 GL GL GL any any any GL any
100 TR 0,01 H any any any TR L any TR any any H any TR TR any any TR any 10 70 90 any 5 TR GL
T Taningan extra (synthetic tanning substances) Tannic acid (tannine) Tannin (tannic acid) Tea Tar Tartaric acid Turpentine Tetrabromethane Tetrachloroethane Tetrachloroethylene Tetraethyl lead Tetrahydrofurane Tetrahydronaphthalin (Tetralin) Thioglycol (thiodiethylene glycol) Thioglycolic acid Thiocarmabide Thionyl chloride Thiophene Tincture of iodine DAB6 Tiutol (hypochlorite Javel water) Toluol (methyl benzene) Tomato juice Transformer oil Triethanolamine Triethylene glycol Tributyl phosphate Trichloroethane, gaseous Trichloroethane Trichloroethylene Trichlorobenzene Trichlorethylphosphate Trichloroacetic acid Trichloroacetic acid Trichlorofluorethane (freon 11, Sdp. 24C) Triethanolamine Tricresylphosphate Trilon Trimethylborate Trimethylolpropane Trisodium phosphate Trioctylphospate T-SS up to 5% Two-stroke oil Typewriter oil U Universal thinners Uric acid Urine V Vaseline oil Vinegar (wine vinegar) Vinyl acetate Viscose spinning solutions Vitamin C (ascorbic acid)
GL 10 10 G any TR TR TR TR TR TR 100
GL 33
TR H TR
77
W Wax alcohols TR Waxes Walnut oil Washing agents G Washing up liquid Water, distillied Water, fully desalinized Water de-ionized Water chlorinated driking water Water, ozonized drinking water Water glass (sodium silicate) any Wattle, vegetable H Wattle, from cellulose H Wine H Wine vinegear (vinegear) H Wine spirit (ethyl alcohol, ethanol, rectified spirit) 96 White spirit TR White spirit (cristal oil) TR Whisky H Whwy Wood stain G X Xylene (isomer mixture) Y Yeast Z Zampon thinners Zinc carbonate Zinc chloride Zinc oxide Zinc salts Zinc sludge Zinc dust Zinc stearate Zinc sulphat
TR
any
GL any GL any any any
78
79
80
British Board of Agrment Geberit HDPE pipes and fittings have been certified by many European authorities and in 1976 also received BBA certification. The British Board of Agrment, in consultation with the secretary of state, reissued the BBA Certificate 92/2796 in 1992. Geberit pipes, adapters and fittings also comply with ISO R 161/1 recommendations.
Instituto Italiano dei Plastici Certificate of the CISQ and the SQP independent certification of quality.
European Quality Certificate ISO 9000 For its manufacturing plants in Europe, Geberit has received the highest quality system certification available, issued by the Swiss EQ-Net member SQS for compliance with the ISO 9000/EN 29000 series, which corresponds to BS 5750. EQ-Net members are in all countries throughout Europe, including BSI QA United Kingdom.
WPC/World Plumbing Council Geberit is an active member of the renowned World Plumbing Conference
SKZ (Sddeutsches Kunststoffzentrum) Europe's leading authority for regular product and production quality assurance of Geberit pipes
EN DIN
EN 1519
Plastic piping system for soil and waste discharge (low and high temperature) within building structure
DIN 19535-10 High-densitiy polyethylene (PE-HD) pipes and fittings for hot water resistant waste and soil discharge systems (HT) inside buildings Part. 10 Fire behaviour, quality control and installation recommendations DIN19537 Pipes and fittings of high-density PE for drainage and sewerage.
Tel.:
Fax:
Switzerland
www.geberit.com
CH-8640 Rapperswil
Neue Jonastrasse 59
+ 41 55 221 6750
+ 41 55 221 6200
Int.e 8282-05/3.0
Subject to change without notiice. The information in this document contains general descriptions of the technical options available, which do not alwalys have to be present in the individual case. The required features should therefore be specified in each individual case at the time of closing the contract.
E-Mail: sales@geberit.com