Professional Documents
Culture Documents
Byzantine (photos)
Submitted by tipo mastr ( tipomastr at gmail.com )
Okay, this is a tutorial for a very well-known weave: byzantine. It is using my
"speed weaving" method. It isn't exactly speed weaving (that definition varies
among how you do it), but it is faster than most ways of building byzantine. In this
tutorial, I am using 16 gauge 1/4", but my AR is a bit too high. A good AR is 3.9, it
makes it not lay flattish. This is using 2 inner connecting rings. Now, to the tutorial.
Step 1:
First, make a 2-2-2 unit. I am using stainless, copper and brass, for ease of
identification. You don't need to, it just helps the explanation process.
Step 2:
Now, fold one of the the brass rings under the steel rings, and one above them,
leaving them sticking out somewhat.
Step 3:
Hook a steel ring through the brass rings, but in-between the copper rings. Do NOT
close it.
Step 4:
Put two closed brass rings on this open ring. Close the stainless ring.
Step 5:
Double that steel ring, and put two copper rings on those two brass rings. At this
point, you are essentially back at step 1.
Step 6:
Like in step 2, fold one of the farthest right rings under the second to the right rings
and one above them.
Step 7:
Put a steel ring through the copper rings, and do NOT close it.
Step 8:
Again, put two closed rings on the open one, and close it. Double this steel ring.
Step 9:
Add on two rings to the farthest right rings.
As you can see, 16 gauge 1/4" rings are too loose, causing rings to flop easily, like
here.
To rectify this, you could make the two connecting rings 3, like this:
There are many fun things to do with byzantine, like moebiusing the rings.
Also try using beads on wire for connecters, or other redundant things.