Professional Documents
Culture Documents
Elevatoe Type
Type Species Side door
Drill elevatoes Casing elevatoes Square shoulder Taper shoulder Square shoulder
Wellhead Tools
Center latch
Half shoulder Taper shoulder
Locking ring
Square shoulder
1. 1
Type code: C side door, D center latch, B locking ring Product code: D elevatoes Aperture (below hole Max load, KN top hole), mm
Tubing elevatoes
Elevatoes
Applications
Elevatoes is buckled at the drill pipe joints, casing or tubing coupling below. For hanging, hoisting and running the drill pipe, casing, or tubing tools. They are designed and manufactured according to API Spec 8A/8C.
Below hole mm
63 76 92 105
Max load mm
900 83 101 1125 109 118 122 105 118 2250 119.1 114.3(4 1/2)EU 127.0(5)IEU 139.7(5 1/2)IU 139.7(5 1/2)IEU 144.5 127.0 130.2 131 134 144 149 118 131 144 4500 144 148
EU external upset the drill pipe IEU internal & external the drill pipe
88.9(3 1/2)EU
101.6(4)EU 106.4
101.6(4)EU
114.3 117.5
121
1350
3150 133
02 03
Elevator aperture mm
117
Max load KN
900
Below hole mm
50 50 63 63 76 76
130 142 171 181 197 222 248 277 303 329 3150 344 411 478 513 4500 2250 1350
225
1125 60.3 2 3/8 EU 73.0 (2 7/8) 73.0 (2 7/8)EU 88.9 (3 1/2) 88.9 (3 1/2)EU 101.6(4) 101.6(4)EU 114.3(4 1/2) 114.3(4 1/2)EU 120.6 108.0 95.2 78.6 65.9 68 76 82 92 98 104 110 117 123 360 585
Tubing elevator
Casing elevator
04 05
1. 2
Applications
Specifications
Type Suitable diameter mm(in)
86-324 (3 3/8-12 3/4) 89-432 (3 1/2-17) 340-762 (13 3/8-30) 80-273 (2 3/8-10 3/4)
Manual Tongs
Manual tongs are used to screw up or unclamp the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch shoulder.
1. 3
Applications
Elevator links
Elevator link is a tool used to hang elevators. They have two forms: single arm & double arms.
Manual tongs code Suitable for the diameter mm Max torque KN.m Max load KN Single & double mode: D single arm S double arm Elevator mode
06 07
Type
Connecting sizes between elevatoe link upper ears and drilling hooks
r 22 22 29 29 35 35 48 63 R2 38 64 64 64 102 102 121 127 l4 60 70 80 100 140 140 160 190 l5 120 120 140 140 200 200 240 262 l6 180 180 190 210 250 250 300 305
L(mm)
Type
Connecting sizes between elevatoe link upper ears and drilling hooks
r 22 22 22 29 29 29 R2 38 38 64 64 64 64 l3 35 45 65 75 80 100 l4 90 100 120 160 160 160
L(mm)
15 20 22 22 22 24
20 20 25 35
08 09
1. 4
Applications Specifications
Slips
Type WT drill collar slips can accommodate drill collar diameter from 41/2 in
Type in Drilling collar diameter mm Kg Weight lb Max load Product code: W drill stem slips, WT drill collar slips, WG casing slips Slips size code Max load 108 101 40 tons 92 86 114.3-152.4 49 139.7-177.8 46 171.5-209.6 42 203.2-241.3 39
It is tool used to grip and hang drilling string, there are two kind of slips: three-piece and multi-chip slips.
Model representation
There are three model of DCS drill collar slips: S, R, and L. they can accommodate drill collar from 3in (76.2mm) to 14in (355.6mm) O.D..
Casing slips can accommodate casing diameter from 65/8 30in 168.3-762mm)
in Diameter mm Kg Weight lb Total number of segments 196 12 184 12 166 12 181 13 192 14 209 15 260 17 247 18 308 21 367 25 383 26 443 30 486 33 546 168.3 89 177.8 84 193.7 75 219.1 82 244.5 87 273.1 298.5 95 118 339.7 112 406.4 140 473.1 167 508 174 609.6 201 660.4 220 762 248 65/8 7 75/8 85/8 95/8 103/4 113/4 133/8 16 185/8 20 24 26 30
Slips type
in 3-4
DCS-S
4-47/8 101.6
DCS-R
41/2-6 114.3 51/2-7 139.7 63/4-81/4 171.5 8-91/2 203.2
DCS-L
81/2-10 215.9 91/4-111/4 235.0 11-123/4 279.4 12-14 304.8
123.8 47 103
152.4 54 120
177.8 51 112
209.6 70 154
241.3 78 173
254 84 185
285.8 90 198
37
10 11
Drill slips can accommodate drill pipe from 2 3/8 to 5 1/2inch (60.3139.7mm) O.D.. They are classified as type short (SDS), medieum (SDML) and extra long (SDXL) according to gripping length. SDS slips are designed for shallow hole drilling, SDMLslips are the perfect choice for all medium depth drilling, SDXL slips are designed for deep drilling.
1. 5
4 1/2
3 1/2 88.9 64.9 143 3 1/2 88.9 94 207 3 1/2 88.9 103.9 229 4 101.6 61.7 136 4 101.6 90.3 199 4 101.6 99.3 219 5 1/2 4 1/2 114.3 57.6 127 4 1/2 114.3 85.3 2 1/8-3 1/4
Safety clamps
Model
3 1/2
2 7/8 73.0 50.3 111 2 7/8 73.0 85.3 188 3 1/2 88.9 48.5 107 3 1/2 88.9 81.6 180
non-shouldered pipes sliping from the clamp, by adjusting the pitch number of die insert to chang the diameter range, for handing flush joint pipe and drill collar.
SDS Weight
Specifications
Handling Pipe Size in
1 1/8-2
Weight mm kg
16.3 18.2 20.9 25.0 27.7 29.1 31.3 32.7 40.0 41.8 44.0 46.3 48.6 50.9
lb
36 40 46 55 61 64 69 72 88 92 97 102 107 112
SDML
28.6-50.8 54.0-82.6 88.9-117.5 114.3-142.9 139.7-168.3 165.1-193.7 190.5-219.1 215.9-244.5 241.3-269.9 266.7-295.3 292.1-320.7 317.5-346.1 342.9-371.5 368.3-396.9
188 3 1/2-4 5/8 4 1/2 114.3 93 205 4 1/2-5 5/8 5 1/2-6 5/8 6 1/2-7 5/8 7 1/2-8 5/8 5 1/2 139.7 82.1 181 11 1/2-12 5/8 5 1/2 139.7 95.3 210 12 1/2-13 5/8 13 1/2-14 5/8 14 1/2-15 5/8 8 1/2-9 5/8 9 1/2-10 5/8 10 1/2-11 5/8
SDXL Kg Weight lb Model Slips body size in Pipe size SDML Weight Kg lb Pipe size SDXL Kg weight lb in mm 92.5 204 4 101.6 107.5 237 88.9 196 4 1/2 114.3 103 227 84 185 5 127 96.6 213 90.9 200 41/2 114.3 106.1 234 84 185 5 127 101.5 224 in mm 4 101.6 5 4 1/2 114.3 5 127 4 1/2 114.3
5 127
12 13
1. 6
Casing size (in) Max load (tons/kN)
Casing Elevators/spiders
Slip type casing elevators/spiders are tools for handing casing from 4? 14inch O.D.
1. 7.1
drilling equipment .
ZQ drill pipe power tong is an ideal wellhead tool for oil drilling, widely applied in make-up and breaking-out for well drilling and repairing on offshore and land. Openthroat design of the ZQ series with high mobility allows escaping from drilling pipe freely. The tong is a combination of spinning tong and torque tong. It substitutes cathead, suspension tong and spinning rope in making-up and breaking-out. The tongs are designed and manufactured according to API Spec 7K Specification for
Specifications
4 1/2,5,5 1/2,6 5/8,7,7 3/4,8 5/8,8 3/4,9 5/8,9 3/4,9 7/8 10 3/4,10 7/8,11 7/8,13 3/8,13 1/2,13 5/8,13 3/4,14 350/3150,500/4500
Specifications
Type
mm Size range in kN.m Max torque
ZQ203-125
127-203 31/2
coupling-8body
ZQ203-100
121-203 31/2
coupling-8body
ZQ203-100A ZQ203-100B
121-203 31/2
coupling-8body
ZQ162-50
85-162 2 /8 50 36880 60 4.1 16 2320 120 32 1000 39.4
3
ZQ127-25
65-127 23/8
1 2
121-203 31/2
coupling-8body
1. 7
Q Q Tongs mode Using the max O.D. Max torque KN
ft.lbf rpm
Speed(high gear)
Speed(lower gear) rpm Mpa Pressure rating Psi L/min Flow rating gpm mm Shiting distance in mm Trave distance
Power tongs
-
Model representation
in mm Lifting distance in
0-800 0-31.5
1750x1650x2050 1570x800x1190 1110x790x820
Power tongs type: Z drill pipe power tongs, T casing power tongs
mm size in kg weight lb 5730 5290 5510 7165 3310 1360 68x41x69 2600 67x39x55 2400 67x39x55 2500 69x65x81 3250 62x31x47 1500 44x31x32 620
14 15
Specifications
1. 7.2
open and manufactured according to API Spec 7K equipment .
Type
Size range
TQ178-16
mm
TQ340-20A
101.6-178 4-7 18 2610 114 30.1 2.4-3 1770-2200
TQ340-35
139.7-340 5 /2-13 /8 18 2610 114 30.1 2.5-3 1844-2200 6.0-7.5 4420-5530
1 3
TQ178-16A
101.6-178 4-7 18 2610 114 30.1 2.4-3 1770-2200
TQ340-35A
101.6-340 4-13 /8 18 2610 114 30.1 4.0-5.0 2950-3680
3
TQ340-50
139.3-340 51/2-133/8 17.2 2494 120 31.7 4 2950 11 8103
In Max pressure Mpa Psi Working flow L/min Gpm Hi. Gear KN.m ft.lbf KN.m ft.lbf KN.m ft.lbf rpm rpm rpm mm Size im kg lb
Type TQ casing tongs are widely used for making up or breaking out pipe or casings in dianeters of 4-13 3/8 inch. The tong heads are designed type and freely clamp and escape from the casing. TQ casing tongs are safe, reliable, and easy to handle with high mobility. This tongs can be connected to computer controlling units and can serve as ideal well mechanical tool for surface operations in oil fields. The tongs are designed Specification for drilling
Lo. Gear Hi. Gear Mid. Gear Lo. Gear Max torque Mid gear
16 11800 54-97
speed
Weight
16 17
1.8 1. 8.1
API Spec 7K Specification for Drill Equipment .
Bushing
1. 8.2
Specifications
Bushing type Drive type
MSS
Master bushing
371/2inch, they are with
To provide the master bushings and insert bowls with the size from 171/2
high-quality alloy steel and the sizes conform to API Spec 7K. there are two types, pin drive and square drive, API standard rotary slip, drill collar slip, casing slip or roller Kelly bushing can be contained in them.
Roller kelly bushing is a necessary tool for drilling. It is to drive kelly spinner by matching with master bushing. Through rotating of four
rollers, the friction between rollers and kelly pipe is reduced and service life is extended. For different sizes of kelly pipe and hexagonal pipe only need to change corresponding rollers. To connect with rotary table, there are two transmission styles (square and pin). The product is designed and manufactured according to
Square drive(split body)
Specifications
Model
HDS 27-HDP 20-HDP MDS RTM4 Medium 20-MDP Pin drive 17-MDP RTS4 Light-duty Square drive 2 1/2-4 1/2 2 1/2-4 1/2 3-4 1/4 3-4 1 / 4 MPCH 2 1/2-4 1/2 3-4 1/4 MSP Square drive Heavy Pin drive
Type
Way of drive
Square drive
27 1/2 20 1/2 MSPC Pin drive (solid body) 23 27 1/2 17 1/2 MDSP Pin drive (split body) 18 20 1/2 Pin drive (split body) 23 27 1/2 Pin drive 37 1/2
2 3/8-10 3/4
Hex. (in)
3-6 3-6 3-6 3-4 1/4 3-4 1/4
2 3/8-8 5/8
2 3/8-8 5/8
18 19
1. 8.3
are split bushings.
Casing Bushings
1. 9
according with API standards.
Lifting subs
To provide the type CU, CUL and CB etc. casing bushing and insert bowls, they are used to handle casing from 95/8 to 30inch O.D. they type CU and CUL are solid bushing, type CB
Lifting Subs are of one-piece construction and manufactured from alloy steel fully heat-treated. This heavy-duty type drill collar lifting sub is designed for use with the drill pipe elevators. The size of others are
Specifications
Rotary table size in Bushing type Type P/N
Body And Insert 171/2 or201/2 26 or 271/2 271/2 CB 371/2 or 491/2 CU CUL bowl
Model representation
Casing size (in) 23/8-85/8
bowlBody 3102and insert180P
95/8-103/4 113/4-133/8
Body 3102 And Insert
16
Body 3102 1902 Lifting subs abbreviations of the name Nominal size (mm) Thread type
Body 3103 Body 3103 Body 3103 Body 3103 And Insert And Insert And Insert And Insert Body3103 bowl 3103,180P bowl 3105,1902 bowl 3105 bowl 3104 Body 6695 Body 6695 Body 6695 Body 6695 And insert And insert And insert And insert Body 6695 Bowl 6126, 6115 Bowl 6126, 6114 Bowl 6126 Bowl 6127 Body 20 And Body 20 Body 20 And Body 20 And Body 20 Body 24 Body 26 Body 30 insert Bowl And insert 6126, 6115 Bowl 6126, 6114 insert Bowl 6126 insert Bowl 6127
20 21
Specifications
No.
1 2 3 88.9 (3-1/2) 4 5 6 71.4 7 8 9 10 11 12 13 NC56 14 15 16 17 18 NC70 19 20 NC77 95.3 6-5/8REG NC61 7-5/8REG 203.2 (8) 209.6 (8-1/4) 228.6 (9) 241.3 (9-1/2) 247.7 (9-3/4) 254.0 (10) 279.4 (11) 127.0 (5) NC50 (4-1/2)IF 184.2 (7-1/4) 196.8 (7-3/4) 82.6 Nc46 (4IF) NC44 158.8 (6-1/4) 158.8 (6-1/4) 165.1 (6-1/2) 171.5 (6-3/4) 177.8 (7) 50.8 68.3 NC35 NC38(3-1/2IF 120.7(4-3/4) 127.0 (5) 152.4 (6)
I.D. mm
31.8 44.5 54
Connection API
NC23 NC26 (2-3/8) Nc31 (2-7/8)
Bits
services. They based on 3D CAD software and product data management, throughout the life cycle of the product to conduct a comprehensive technical management, to make product development to achieve fast, accurate and to maximize the timeliness and functionality to meet market demand. Through the application of lithology tester, Real-time test mechanics parameters of the normal atmosphere and confining pressure in the drilling of rock strata (such as hardness, plastic coefficient, drillability, triaxial compressive strength, elastic ratio and poisson's ratio, etc.). For optimizing bit selection to provide reliable data on formation rock properties, more accurately the type of drill bits to provide a reasonable. In the during use, the actual drilling time, footage, mechanical drilling speed, hydraulic parameter, drilling cost and other factors will affect the drilling efficiency compared to the design estimates, and classification of the wear assessment to improve the drill bit of the design and lectotype.
Introductions
As per their structure, drill bits can be divided into drag bits, roller cone bits, diamond bits and coring bits. China is a major manufacturing base of bits, it is ranked first in Asia and third in the world china owns intellectual property rights and its technology have reached the international advanced level. Leading in the drill bit cutting teeth materials technology, bearing unique structure and materials, new technology of drill bit hydraulics, new products represent world's development trend in the independent R & D highspeed motor drill series, hard formation bits series and non-standard size series. China have advanced laboratory to test drill bits structure and functional unit, calculated laboratory, be able to carry out experimental evaluation of drill bits all units including cutting structure, bearings, seals and hydraulic systems. Achieved from basic research, application of new technologies, product development and manufacturing research to product application, services and improve of the virtuous circle, so technical reserves are backing of the product development and marketing technology
22 23
2. 1
MD series MiniMD series SMD series HF series SWT series A series
Diameter tolerance
mm 0-0.79 0-1.57 0-2.38
Model representation
To adopt a product feature name
Species
MotorDigger Mini MotorDigger Super MotorDigger HardFighter Swifture Air High-speed motor bit Slim hole drill bit Super-high speed motor bit Hard-formation bit High-performance steel tooth bit Air bit
Jet diameter mm
20.30 23.50 29.74 32.89 40.84
mm
10
11
12
13
14
16
18
20
22
24
Example
S2-10 S 2 10
Drill bit diameter,8.5inch (215.9mm) Series code, high-speed motor bit series Standard type Class number, express 1ADC coding For 5 5/8 to 7 3/8 bits Additional features of the code Jet outlet diameter (mm)
24 25
2. 1.1
hydraulic effect and long service life. wells drilling.
Horizontal well drilling technology is improved continuously, in which extended reach well drilling technology and multilateral wells drilling technology have been developed rapidly. The new type of MD high speed motor bit is suitable for directional well and horizontal, high rotary speed, gage protection technology ability and stability, high reliability, well MD high speed motor bit is suitable for drilling with rotary speed from 300 to 90 RPM, which is the ideal choice for directional well, horizontal well and horizontal multilateral
2. 1.2
low efficiency and tooth break. super-deep well.
Increase of drilling speed is more difficult in deep well and super-deep well lower part of the slim hole section.MiniMD slim hole cone bit has improved service life and security of the bit, and decreased round trip times, realized the purpose of increasing drilling speed and decreasing drilling cost. MiniMD cone bit is with the feature of MD high speed motor bit, and designed with special bearing seal structure and oil storage system, tooth material, cutting structure and formation lithology are matched reasonably to solve the problems of MiniMD slim hole cone bit is the ideal choice for slim-hole section drilling in deep well and
mm
146.1 149.2 152.4 155.6 158.8 165.1 MD517 MD517 Md517 MD517 MD517 MD517 MD537 MD537 MD537 MD537 MD537 MD537 MD547 MD547 MD547 MD547 MD547 MD547 MD617 MD617 MD617 MD617 MD617 MD617 MD637 MD637 MD637 MD637 MD637 MD637 MD647 MD647 MD647 MD647 Md647
mm
200.0 215.9 222.3 241.3 311.2 MD437 MD437 MD437 Md437 MD437 MD447 MD447 MD447 MD447 MD447 MD517 MD517 MD517 MD517 MD517
Code
5 7/8 MD537 MD537 MD537 MD537 MD537 Md617 MD617 MD617 MD617 MD617 MD637 MD637 MD637 MD637 Md637 MD647 MD647 MD647 MD647 MD647 6 6 1/8 6 1/4 6 1/2
26 27
2. 1.3
hours at the work situation of above 400 RPM.
The use of turbo-drill tool, with the 11 5/8inch and 8 1/ 2inch drill bits, from 400rpm to 600rpm, service life of normal cone bits is about 10 hours usually. For working situation with super high rotary speed, drill bit used roller-journal bearing and metal-sealing, provided bearing reliability and long life. We have also developed cutting and extended
2. 1.4
SMD617 SMD617
HF hard-formation bit
Petroleum exploration has been developed to deep formations gradually, in deep formations (compact plastic mudstone, lava and granite etc.,), low ROP restrict the economic of development in deep well or super-deep well. Failure mode, such as tooth break, tooth wear, cone tip wear and bit diameter shrink etc., usually appear when conventional cone bits drill in hard formations. So we have developed HF series bit for hard
double nozzle hydraulic structure. SMD of the service life can reaches to more than 30 SMD is recommended to 250rpm to 600rpm, which is quite economical.
formations through analyze and research these failure modes deeply and make use of advanced computer 3D simulation technology and lots of platform experiments. Result in site shows HF series bit has the advantages of long service life, high reliability, fast
Bit size in
8 1/2 11 5/8
ROP and strong gage protection ability etc.. HF series bit is the ideal choice for drilling in
mm
215.9 295.3 SMD117 SMD117 SMD137 SMD137 SMD417 SMD417
Bit model
SMD437 SMD437 SMD447 SMD447 SMD517 SMD517 SMD537 SMD537
Bit size in
6 6 1/8 6 1/2 6 3/4 7 7/8 8 1/2 8 3/4 9 1/2 9 7/8 12 1/4
mm
152.4 155.6 165.1 171.5 200.0 215.9 222.3 241.3 250.8 311.2 HF617 HF547 HF537 HF537 HF547 HF537 HF537 HF537 HF537 HF537 HF627 HF617 HF627 HF617 HF617 HF547 HF547 HF547 HF547 HF547 HF637 HF627 HF637 HF627 HF627 HF617 HF617 HF617 HF617 HF617
Bit model
HF637
HF737
HF637 HF637 HF627 HF627 HF627 HF627 HF627 HF637 HF837 HF637 HF637 HF647 HF647 HF737 HF737
28 29
2. 1.5
formations with high rotary speed.
Abradability of teeth of conventional steel tooth cone bit is worse; tooth shape structure is lack of optimization, which leads to decrease of average ROP. SWT series steel tooth bit
2. 1.6
air drilling bits have solved these problems.
In the water less of hard stratum, the stratum of serious leakage loss or low pressure, in order to achieve higher drilling speed, commonly used air drilling process technology. In the air drilling process conditions, conventional cone bit had problems such as short service life, low ROP and weak gage protection ability etc.. Now A series
with high efficiency can solve these problems, with strong wear resistant teeth and fast ROP, bit can work more stably, which is more suitable for drilling in soft or middle soft Application of SWT series steel tooth bit with high efficiency is the best way to solve the problem of increasing drilling speed in higher part of well.
Bit size in
7 7/8 8 1/2 8 3/4 9 1/2 12 1/4 13 3/4 15 1/2 16 17 1/2
Bit size mm
200.0 215.9 222.3 241.3 311.2 349.3 393.7 406.4 444.5 SWT116 SWT116 SWT116 SWT127 SWT115 SWT115 SWT115 SWT115 SWT115 SWT116 SWT116 SWT127 SWT127 SWT116 SWT127
Bit model
SWT127 SWT127
in
5 7/8 6 6 1/8 7 7/8 8 1/2 9 1/2 12 1/4 12 3/8
mm
149.2 152.4 155.6 200.0 215.9 241.3 311.2 314.3 A627 A627 A627 A537 A537 A537 A537 A537 A547 A547 A617 A547
Bit model
A547
A617
A627
30 31
2. 2 2. 2.1
Diamond bits
Drill specifications
Size Gage length Blade count Junk slot area Main cutter size Shank Number of nozzles Make up torque purchase KN.m in mm purchase mm2 mm
KM 1944
8 1/2 85 4 11087 19 4 1/2 API Reg. 4 16.6-23.7
Cutter exposure is optimized to insure the bit can achieve higher ROP in soft to medium formations. Deep junk slot design to enhance cuttings removal ability of the bit in order to obtain high ROP. Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling. The bit is designed with longer gage for better angle holding ability and better stability.
32 33
2. 2.2
Bit specifications
Name
Bit size Blade count Main cutter size Number of nozzles Gage length Shank Make up torque Junk slot area
KM1952A
50 260 30 140 30 70
Unit
in purchase mm purchase mm
Parameters
12 1/4 5 19 7 64 6 5/8 API Reg
KN.m mm2
49.6-51.4 21539
Damping tooth design, the drill bit will pass through part the hard interlayer stratum. Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
34 35
2. 2.3
Bit specifications
Name
Bit size Blade count Main cutter size Number of nozzles Gage length Shank Make up torque Junk slot area
KS1952SG
rpm KN L/s
Unit
in Pcs mm Pcs mm API Reg KN.m mm2
Parameters
8 1/2 5 19 5 64 4 1/2 16.6-23.7 12426
36 37
Core bits
Core bit use tungsten carbide matrix with a steel skeleton in it. The bits adopt parabolic, double cone, tapered step crown profile, and diamond inner and outer gauge. Adapt to a variety of drilling conditions and stratum of the core drill bits, but also according to special requirements of the site design and produce special purpose coring drill bit series, all the core drill bit and variety of tools can form a complete set the use, with rate fast, harvest a high rate, long life and low cost characteristics.
Features
3. 2
Natural diamond ID & OD gage.
SC Series
Arc crown profile, blade cutter setting. Fluid course with ID flow or face discharge ports are optional.
Features
Arc crown profile, blade cutter setting. and cooling effect upon cutters of gage.
3. 1
Bit size
Gage length API CONN. Hydraulic flow rate Speed
Parameter
Bit size
Size TFA Gage length API CONN. Hydraulic flow rate
GC Series
Recommended
Speed Weight on bit
in
5 7/8 2 5/8 6 2 5/8 8 1/2 4
In2
0.15-1.00 0.15-1.00 0.20-1.50
in
1 1 1 1/2
in
4 3/4 2 5/8 4 3/4 2 5/8 6 3/4 4
l/s
6-13 6-13 22-32
gpm
100-200 150-250 350-500
rpm
60-500 60-500 60-500
kN
23-68 23-68 45-90
klbs
5-15 5-15 10-20
Natural diamond ID & OD gage, fluid course set on ID gage to ensure a better cleaning Suitable for medium hand formations. it allows to be used in a wide variety of formations.
Parameter
Recommended
Weight on bit Size TFA
in
5 7/8 2 5/8 6 2 5/8 8 1/2 4
In2
0.30-0.80 0.30-0.80 0.60-1.20
in
1 1/8 1 1/8 1 1/2
in
4 3/4 2 5/8 4 3/4 2 5/8 6 3/4 4
l/s
10-15 10-15 22-35
gpm
160-240 160-240 350-550
rpm
60-500 60-500 60-500
kN
45-90 45-90 75-113
klbs
10-20 10-20 15-25
38 39
Downhole tools
4. 1
ZSJ/ZXJ Type drilling jars (hydraulic-mechanically)
allowed after jar is put into downhole. drilling integrated jars type.
Drilling Jars
The drilling jar which is connected with drill tool and worked with drill string is a downhole stuck freeing tool in drilling operation .It is a first selected tool for directional well,complicated well and deep well.The drilling jar is consisting of ZSJ type drilling up jar and ZXJ type drilling down jar,both they can be used mutually or operated separately .The up jarring section takes use of hydraulic mechanism,the jarring force can be adjusted according to up elevating load but can not exceed the max.load for tool load rated. The down jarring section takes use of mechanical friction mechanism, the jarring force is well preadjusted by adjusting device before put into downhole.No re-adjustment can be
Connection API Max. tensile load (kN) Max. Working Torque (N.m) Rated release force for up jar (kN) Max.up jarring release force (kN) Max.down jarring release force (kN)
According to their principle is divided into mechanical, hydraulic and hydro-mechanical type; according to the functions can be divided into drilling up jar, drilling down jar and
40 41
42 43
44 45
46 47
4. 2
TYPE SJ46 SJ62 SJ70 SJ80 SJ90 SJ100 SJ110 4-3/4 (121) 6-1/4(159) 7(178) 8(203) 9(229) 10(254) 11(279) 1-1/2 (38) 1-7/8(47) 2-1/4(57) 2-1/2(65) 2-13/16(71) 2-13/16(71) 2-13/16(71)
Shock absorbers
Hydraulic Shock Absorber Type YJ should be connected with the drilling string close to the bit. It can absorb or reduce axial vibration and thrust load of the drilling string, and have a good result for prolonging the service life of the bit and protecting the drilling tools as well as the surface equipment.
Max.Working Max. Tensile Max. Drill Tool Joint Torque Lbf-ft O.D.in (mm) I.D.in (mm) Connection API Load Lbf (N) Pressure Lbf (N) (N?m)
220,320 (980,000) 337,230 (1,500,000) 337,230 (1,500,000) 449,640 (2,000,000) 562,050 (2,500,000)
9,570 (265,000) 76,430 (340,000) 76,680 (350,000) 110,160 (490,000) 119,150 (530,000)
7,370 (10,000) 10,840 (14,700) 10,840 (14,700) 14,450 (19,600) 14,450 (19,600)
Max.Working Max. Tensile Max. Drill Tool Joint Torque Lbf-ft O.D.in (mm) I.D.in (mm) Connection API Load Lbf (N) Pressure Lbf (N) (N?m)
YJ 80 YJ 90
220,320 (980,000) 337,230 (1,500,000) 337,230 (1,500,000) 449,640 (2,000,000) 562,050 (2,500,000) 629,490 (2,800,000) 674,460 (3,000,000)
67,440 (300,000) 76,430 (340,000) 76,430 (340,000) 98,920 (440,000) 121,400 (540,000) 121,400 (540,000) 121,400 (540,000)
7,370 (10,000) 10,840 (14,700) 10,840 (14,700) 14,450 (19,600) 14,450 (19,600) 18,060 (24,500) 21,680 (29,400)
4(100) 4-3/4 (120) 4-3/4 (120) 4-3/4(120) -40 +150 4-3/4 (120) 4-3/4 (120) 4-3/4(120)
48 49
4. 3
Sort 1 2 3 4 5 6 Description 7
Cross-over Sub
5
Type A or B A or B A or B A or B A or B C C C
Directional tools
Cross-over sub acts for conversion and connection of drill stem component in petroleum ,natural gas and geology drilling work.It is used mainly for connecting of upper drill tools and lower drill tools during drilling operations.
5. 1
Stabilizer
Integral 3-Spiral Blade Stabilizer, Integral 4-Spiral Blade Stabilizer (string type, near bit type ). The working hardfacing surface (also called as wall contact )materials available separately are (1) carbide insert,(2) Inserted diamond compound, (3) Low temperature brazing
Type A stand for same diameter: one crossover sub has one size (D) on O.D., code A. Type B stands for reduce type: one crossover sub has two sizes (D1, D2) on O.D., code B. Type C is left hand thread type: the connection thread is left hand type, code C.
50 51
piece construction stabilizer is made of a body and a centralizing body(refer to sleeve replaceable). The advantage is that the sleeve can be changed quickly and easily after sleeve hardfacing is worn-out. This kind of stabilizer is especially suitable for working in directional well .
480 470 472 455 555 550 8 540 530 682 676 670
214 210 190 203 197 310 305 292 279 444 76 432 420 279 13.85~16.55 7 7 7 7 5/8 5/8 5/8 5/8 REG REG REG REG 6 6 6 6 1800~2000 5/8 5/8 5/8 5/8 REG REG REG REG 4 4 4 4 1800~1900 1 / 2 1 / 2 1 / 2 1 / 2 IF IF IF REG
71
6.95~7.25
1800~1900
12 1/4
311.2
6 5/8 REG
12 1/4 12
16 17 1/2 24 26 28
238
200
600
19.7~11
1800~2000
644
52 53
5. 2
Type
DWWJT121 DWWJT127 DWWJT159 DWWJT165 DWWJT178 DWWJT197
6
thread
NC38 3 1/2 REG NC38 3 1/2 REG NC46 4 1/2 REG NC46 4 1/2 REG NC50 4 1/2 REG 5 1/2FH 5 1/2 FH XG-7 5 XG-7 5/8 XG-7 5/8 XG-8 5/8 XG-9 5/8 XG-9 5/8 XG-13 3/8 5 5 1/2 5 1/2 5 1/2 7
Cementing Tools
Directional bend sub is a mainly deflecting tool with screw drill. The screw drill bring to bear sideforce on bit,The bit cut borehole wall side continue.The well track will be curve.
Technical Parameter
Sinuosity
1-2.5 1-2.5 1-2.5 1-2.5 1-2.5 1-2.5
6. 1
liner and cement in the pipe.
Specifications
Hunger Type O.D.(mm)
152 165 165 195 214 214 298
I.D.(mm)
108 108 122 122 122 155 223
Connection
9 5/8
54 55
6. 2
Specifications
Type
FG127 FX127 FG140 FX140 FG140 FX140 FG168 FX168 FG178 FX178 FG194 FX194 FG219 FX219 FG245 FX245 FG273 FX273 FG340 Fx340
Float coupling or casing float shoe is name of casing guide shoe or coupling which can produce buoyancy.
6. 3
cement ring cementation.
Casing centralizer
Casing centralizer is a facility to maintain the casing at the well's center; it can also reduce the resistance during running casing and avoid sticky casing, help to improve the quality of There are rigid and spring centralizers.
Starting force N
1027 1872 1659 3695 5057 5422
Return force N
2328 3114 3014 7330 8013 5881
O.D. (mm)
Length (mm)
Type of cement filling Type of non-cement filling
141 450-550 154 188 Long circle 195 216 244.5 270 600-700 298.5 324 365 800-900 Short circle (or on the request of user) Short circle (or on the request of user) 139.7 177.8 244.5 210/212/215 210/212/215 314 550-650 (or on the request of user) 300-500 Long circle (or on the request of user)
Centralizer O.D.mm
151 151
56 57
6. 4
Parameters
Size mm Max. O.D. mm Orifice mm Length mm Rated load t Seal pressure MPa Open pressure MPa Close pressure MPa Lower sliding bush ID. mm Upper sliding bush ID. Mm
Stage cementing equipment is to achieve two-stage or multistage continuous or uncontinuous injection of cement operations, is installed in the predetermined position of the casing string a special facility. By stage coupling body, lower rubber plug, open and close plug component.
6. 5
cement joint connect with casing. cement.
Size mm 89 127 O.D. mm 89 127
Cement heads
According to connect thread, cement is divided into drilling pipe cement joint and casing cement joint. Drilling pipe cement joint connect with drill at the wellhead, casing Casing cement joints are divided into single-and dual-plug
300 350
35 35
58 59
Well-control Equipment
7. 1
Model description
Orifice code Rating working pressure Mpa
Blowout preventer
Product code; FH ring of spherical rubber core, FHZ ring of cone rubber core, FZ single-ram, 2FZ dual-ram, 3FZ three-ram, SFZ manual ram
60 61
7. 1.1
claw block connect two forms. spherical rubber core and scraper seal.
Profile size mm A
745
B
769
Total weight kg
1433
Annular BOP has two kinds of structure; they are cone-shaped and spherical-shaped rubber core. Top cap and shell use bolt and Spherical rubber core annular BOP consist of top cap, shell, piston, Cone rubber core annular BOP consists of top cap, wear-resisting plate, shell, piston, cone core, scraper seal and support tube.
21 346.1 35
Working pressureMPa
70 70 70 35 14
close capacity L
36 67 116 134 95.3
open capacity L
27 66 117 134 94.5
35 21 35
62 63
7. 1.2
BOP. Switch mode: hydraulic and manual Lock method: manual and hydraulic lock
Ram BOP
Ram BOP according to ram number of set can be divided into: single, dual and three ram
Side door switch mode: rotating and line movement side door
Parameters
Orifice in
7 1/16-26 3/4
7. 2 7. 2.1
replacing polluted slurry in well.
Choke manifold
The choke manifold is support equipment of hydraulic BOP for controlling well blow out and well pressure. Through the choke valve, perform well killing, Control wellhead pressure of casing and standpipe, restoring mud to control pressure at well bottom to stop overflow. Through relief pressure, decrease wellhead pressure to perform off Well . Through drain valve, decrease casing pressure of wellhead to protect BOP stack. Furnished with hydraulic control pod to achieve the function of remote control Flexibility Shut
Lock method
Manual/Hydraulic
Connection method
Screw/Flange
4.1/16"(46mm
Working Medium: oil, natural gas, mud Working Temperature: -46 C 121
64 65
7. 2.2
Kill manifold
When full ram seals well, inject weighted mud into well bore to perform well killing When well blowout occurred, inject water into well through kill manifold to prevent be on fire. When the well is on fire, inject extinguishing agent into well bore through kill manifold to put out fire.
7. 3 7. 3.1
The kelly cock valve ,which is a manually operated ball valve run in the I.D of drill string ,is one of effective tool for preventation from blowout .The kelly cock is divided into upper kelly cock valve and
4.1/16"(46mm 121C
lower kelly cock . The upper kelly cock is connected between lower end of swivel and upper end of kelly. The lower kelly cock is connected between upper end of drillpipe and lower end of kelly or connected between lower end of kelly saver subs. The kelly cock features a simple operation, the kelly cock can be opened on or closed off by only turning the special operating spanner at 90 degrees according to indicating direction.During drilling operation,in order to avoid serious well kick or blowout accident, the kelly cock shall be connected at upper end and lower end of kelly.
66 67
O.D. (mm)
146 200
I.D. (mm)
50 76.2
7. 3.2
Specification Check Valve Assembly O.D. (mm)
FT89 FT105 FT121 FT159 FT168 FT178 Ft203 33 36 54 58 68 68 68
It is an inside BOP (blowout preventer)in the drill string.It is simple in structure and easy to operate.When blowout is going to be happened,the thread connections of the Kelly are screwed out immediately and the back pressure valve is put into the I.D. of drill pipe and then pumped downward to the required place.Thus the blowout accident can be prevented.The
tool is consisting of landing sub and check valve assembly.The landing is thread connected with stop ring and tightened on and put into downhole with drill string .The landing sub is
O.D. (mm)
105 121 127 165 178
Thread connection
NC31 NC38 NC38 NC46 NC50 , 5 1/2FH
I.D. (mm)
41.3 50 50 61 71.4
used as a sub above drill string before check valve is run in downhole.
Connection API
68 69
7. 3.3
Type
Fj229 FJ203 FJ178 FJ168 FJ165 FJ159 FJ121 FJ105 Fj89
8
Working Pressure(MPa)
70(35) 70(35) 70(35) 70(35) 70(35) 70(35)
FJ Type-Arrow Back Pressure Valve is an important tool in preventing of blowing out in drilling operation. Comparing to other structural valves, it possess some advantage such as high strength, big flowa area, high temperature resistant, high pressure resistant, and easily maintenance.
8. 1
tubing and drill pipe.
Taper taps
The taper tap is a special fishing tool making thread in tube dropped object such as drill pipe and oil tube.The taps are turned from high trength alloy steel forging materials and heat treated.It is made with chip groove so as to make threads.The box tap is a special external fishing tool which is engaged on the outside wall of tubing objects such as oil
Connection
7 5/8 REG 6 5/8 REG 5 1/2 FH NC50 NC50 NC46 NC38 NC31 Nc26
I.D. (mm)
82 82 82 82 82 70 56 44 33
Connection
NC26 NC26 NC26 NC31 NC31 NC31 NC31 NC31 NC38 NC38 Nc38
I.D. (Mm)
16 20 25 20 25 15 25 8 16 20 20
70 71
8. 2
Type
MZ-NC26 MZ-NC26 MZ-NC26 MZ-NC31 MZ-NC31 MZ-NC31 MZ-NC38 MZ-NC38 MZ-NC50 MZ-4 1/2FH MZ-5 1/2FH MZ-6 5/8REG
Die collars
Die Collars is a special fishing tool making thread in tube dropped object such as drill pipe and oil tube.The taps are turned from high trength alloy steel forging materials and heat treated.It is made with chip groove so as to make threads.The box tap is a special external fishing tool which is engaged on the outside wall of tubing objects such as oil tubing and drill pipe.
8. 3
Type O.D.(mm)
89 92 95 102 105 114 117 127 143 152 168 168 181
The releasing overshot is the special external fishing tool used for fishing drilcollar, drill pipe, oil tube and other fishes in drilling and work over operation .
Basket grapple
141 141 163 152 159 187 184 200 209.6 216 225.4 238.1 260
Connection API
NC50 NC50 NC50 NC50 NC50 NC50 6 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG
LT-T194 LT-T200 LT-T206 LT-T206A LT-T219 LT-T232 LT-T244 LT-T260 LT-T270 LT-T273 LT-T286 LT-T298A LT-T340
194 200 206 206 219 232 244 260 270 273 286 298 340
62~80 LT-T102 69~73 71~82 76~95 86~108 95~118 110~135 114 141 LT-T168 168 LT-T168B LT-T181 LT-T105 LT-T114 LT-T117 LT-T127 LT-T143 LT-T152
72
73
8. 4
Type
LM-T60 LM-T73 LM-T89 LM-T102 LM-T114 LM-T127 LM-T140 LM-T168 LM-T178 LM-T194 LM-T219 LM-T245 LM-T273 LM-T340 89 105 105 105 105 121 121 162 162 165 203 203 203 203
Releasing spears
8. 5
Type
CLF89
CLF type fishing magnet in petroleum and geology exploration is used for fishing of small fallen objects in the down hole.With some of advantages such as simply structure, easy to operate, reliable performance, small size and lightweight,it is equipped with permanent magnet iron which can attract small objects such as teeth wheel, palm, tong teeth and tool so that small objects in down hole are fished and the well bottom is cleaned up.
In drilling and work over opertion,the releasing spear is a tool mainly used for fishing of drill pipe,oil pipe and casing from fish hole.It can be used with internal cutter ,bumper jar etc.
Connection
NC26 NC26 NC38 NC38 NC38 NC38 NC50 NC50 NC50 NC50 NC50 6 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG 7 5/8 REG 7 5/8 REG
Connection
NC26 NC31 NC31 NC31 NC31 NC38 NC38 NC50 NC50 NC50 6 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG
Temperature in well
210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210
74 75
8. 6
The LL-F type reverse circulation junk basket is used to retrieve all types of small junk objects such as cone,cutter,hand tool and junks from the bottom hole.During drilling operation,it produces a local reverse circulation of fluid at well core so as to effect a complete recovery of junk in the junk basket .Especially when PDC bit is used ,cleaning bottom well by the tool becmes very necessary to ensure the bit with a normal application.The reverse circulation junk basket therefore becomes an essential tool in oil ,geology exploration and drilling engineering.
Mill Shoe O.D. Max.Fish O.D. Ball Dia. (mm) (mm) (Mm)
386 324 292 286 260 252 239 210 202 184 174 136 126 121 103 94 282 248 217 211 195 192 179 159 149 130 123 94 90 82 62 55 55 55 55 55 55 50 50 45 42 42 42 40 35 35 30 30
Connection
7 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG 6 5/8 REG NC50 NC50 NC50 NC50 NC50 NC50 NC31 NC31 NC31 NC26 Nc26
76 77
8. 7
Type
DKJ105 DKJ121 DKJ165 DKJ165 DKJ165 DKJ165 DKJ178 DKJ203 DKJ203
Reversing subs
Reversing sub is also called reversing spear which is a special tool for reversing stuck drill stem above stuck point in drilling and work over operation. When make fishing or reversing, if fallen object is stuck or fail to be released, the tool can released from thread connection of reversing sub to take out fishing tool.
8. 8
Connection (RH)
NC31
The mechanical internal cutter is a special tool to cut pipe in pipe string. With exception of coupling, it can cut at any position of fish. During cutting operation,the releasing spear can be connected above internal cutter, after finish cutting,pipe string above cutting position can be lifted out at a time.
Connection (LH)
NC31 NC38 NC50 NC50 NC50 NC50 NC50 NC50 Nc50
NC38 ND-J114 NC46 ND-J127 NC50 ND-J140 5 1/2FH ND-J168 NC56 ND-J178 6 5/8REG ND-J245 NC61 7 5/8REG
Connection
NC26 NC26 NC31 NC38 NC38 Nc50
78 79
8. 9
type
WD-J58 WD-J98 WD-J114 WD-J119 WD-J143 WD-J149 WD-J154 WD-J194 WD-J206
Mechanical external cutter is a special tool to cut casing, tubing and drilling pipe in pipe string.
O.D.
58 98 114 119 143 149 154 194 206
Pipe O.D.
33.4 60 60 73 52 89 60 89 60 101 89 101 114 127 101 146
Connection screw
2 3/8 TBG 2 3/8 TBG NC26 NC26 NC31 NC31 NC38 6 5/8 REG 6 5/8 REG
Well ID.
62.0 105.0 120.6 125.4 146.2 155.6 158.8 209.5 219.0
80 81