Professional Documents
Culture Documents
HDD Bad Sector Recovery SOP
HDD Bad Sector Recovery SOP
This document will show how to recovery the bad sector in you HDD. It is included two part (1) Low Level Format, (2) Partition and format. Before doing these, please copy StoreJetFormatter to temporally folder.
2. Before running the format tool, please setup the device that you want to format first. NOTE: The devices data will be deleted after formatting. Please back up the data before doing the format tool. 3. Run LLFTOOL.EXE in C:\Program Files\HDDGURU LLF Tool\
4. After the tool is opened, select the device that you want to format. Click Continue >>>
5. The tool will show the selected devices information, and then select LOW-LEVEL FORMAT sheet
7. If you really want to format this device, select Yes. The tool will begin to format the device
8. After the formatting, it will show progress bar. The progress bar will be disappeared after the formatting finish.
2. Confirm the selection as below A. B. C. D. E. F. USB Device: <<USB>> StoreJetTranscend Drive To Format: Whole Hard Disk Capacity: 298GB File System: FAT32 Quick Format: Checked Volume Label: Transcend
3. Press Start to start formatting StoreJet 4. Press Confirm to continue format process
5. You should see status message O.K. at lower right corner of StoreJetformatter