Professional Documents
Culture Documents
Dual Low Noise Operational Amplifiers IT4558: General Description Features
Dual Low Noise Operational Amplifiers IT4558: General Description Features
General Description
The IT4558 consists of two low noise, h igh perfor mance operational amplifiers. It is specially suitable for applications in differential-in, differential-out as well as in industrial measurement tools and applications where gain and phase matched channels are mandatory. The IC features monolithic silicon chip, internal frequency compensation, low noise, low distortion, wide operating voltage range, high gain and high bandwidth. The IT4558 can operate under dual power supply voltage up to 18V or single power supply up to 36V.
Features
Operating voltage: 2V ~ 18V Large DC voltage gain: 110 dB Low input noise voltage: 1VRMS Wide gain bandwidth product: 7 MHz Slew rate: 3V/s Package outline: DIP8, SOIC8
Applications
Audio AC-3 decoded system Audio amplifier AC/DC converter
SOIC-8
DIP-8
INFINITRUE TECHNOLOGY
1/9
IT4558
Pin Configuration
SOIC-8/DIP-8
OUTPUT 1 INPUT 1INPUT 1+ VEE 1 2 3 4 8 7 6 5 VCC OUTPUT 2 INPUT 2INPUT 2+
VCC
-INPUT +INPUT
OUTPUT
VEE
INFINITRUE TECHNOLOGY
2/9
IT4558
Ordering Information
Package SOIC-8 DIP-8 Temperature Range -40oC to 85oC Part Number IT4558S IT4558P Marking ID IT4558S IT4558P Packing Type Tube/Tape/Reel Tube
V V
Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability.
INFINITRUE TECHNOLOGY
3/9
IT4558
Electrical Characteristics
Operating Conditions: VCC = +15V, VEE = - 15V, TA= 25oC unless otherwise specified. Parameter Input Offset Voltage Input Bias Current Input Offset Current Supply Current Large Signal Voltage Gain Common Mode Rejection Ratio Power Supply Rejection Ratio Output Voltage Swing Output Sink Current Output Source Current Slew Rate Equivalent Input Noise Voltage Gain Bandwidth Product RIAA, Rs=1K, 30KHz LPF f = 10KHz RL 2, VO = 10V RS 10 RS 10 RL2K RL10K V-=1V, V+ =0V, VO=2V V+ =1V, V-=0V, VO=2V RS 10 Conditions Min 85 80 80 Typ 0.5 65 5 2.5 110 100 100 Max 3 250 50 4 Unit mV nA nA mA dB dB dB V mA mA V / S
10 12
13 14
70 45 3 1
VRMS
MHz
INFINITRUE TECHNOLOGY
4/9
IT4558
Typical Performance Characteristics
120 110
30
100 90 80 70 60 50 40 30 20 10 0 1 10 100 1k
VCC=15V, VEE=-15V
Output Voltage Swing (V)
RL=2K,TA=25 C
25
20
15
10
10k
100k
1M
10M
10
10
10
10
10
10
Frequency (Hz)
Frequency (Hz)
30 28
10
VCC=15V,VEE=-15V TA=25 C
o
0.5
26 24 22 20 18 16 14 12 0.1
VCC=15V, VEE=-15V
10
2
RS=50 ,TA=25 C
10
10
10
10
10
10
10
Frequency (Hz)
INFINITRUE TECHNOLOGY
5/9
IT4558
Typical Performance Characteristics (Continued)
80
1.2 1.1 1.0
70 60
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -25 0 25 50
o
50 40 30 20 10 0
V CC=15V V EE=-15V
VCC=15V VEE=-15V
75
100
125
-25
25
50
75
o
100
125
Ambient Temperature ( C)
Ambient Temperature ( C)
Typical Applications
BOOST-BASS-CUT
R1 11K Vi C1 0.05F
R2 100K
R3 11K
C2 0.05F
R4 11K
R5 3.6K
R6 500K
BOOST-TREBLE-CUT
R7 3.6K
INFINITRUE TECHNOLOGY
6/9
IT4558
Typical Applications (Continued)
20K
20K
D1
10K VIN
INFINITRUE TECHNOLOGY
7/9
IT4558
Mechanical Dimensions DIP - 8 Unit:mm
9.20.10
6
6
7.620.25 5
3.300.30
1.460.31
0.7
30.150.05
0.254 0.457
2.54 0.13MIN
0.280.07 10.0MAX
R0.75
INFINITRUE TECHNOLOGY
6.600.50
8/9
IT4558
Mechanical Dimensions (Continued) SOIC - 8 Unit:mm
1.550.20
0.220.03
0.32
8
4.90.10 7
0.700.025
0.20.10
6.000.20
D 20:1
0.8
3.900.10
4 4
0.90
1.00
R0.15
R0.15
0.420.09
3 2
INFINITRUE TECHNOLOGY
0.20
9/9